On Tue, 29 Oct 2024 15:34:43 -0500 ira.weiny@xxxxxxxxx wrote: > From: Navneet Singh <navneet.singh@xxxxxxxxx> > > Devices which optionally support Dynamic Capacity (DC) are configured > via mailbox commands. CXL 3.1 requires the host to issue the Get DC > Configuration command in order to properly configure DCDs. Without the > Get DC Configuration command DCD can't be supported. > > Implement the DC mailbox commands as specified in CXL 3.1 section > 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration > information. Disable DCD if DCD is not supported. Leverage the Get DC > Configuration command supported bit to indicate if DCD is supported. > > Linux has no use for the trailing fields of the Get Dynamic Capacity > Configuration Output Payload (Total number of supported extents, number > of available extents, total number of supported tags, and number of > available tags). Avoid defining those fields to use the more useful > dynamic C array. > > Cc: Li, Ming <ming4.li@xxxxxxxxx> > Cc: Kees Cook <kees@xxxxxxxxxx> > Cc: Gustavo A. R. Silva <gustavoars@xxxxxxxxxx> > Cc: linux-hardening@xxxxxxxxxxxxxxx > Signed-off-by: Navneet Singh <navneet.singh@xxxxxxxxx> > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > Co-developed-by: Ira Weiny <ira.weiny@xxxxxxxxx> > Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx> I'll assume you'll fix the typo the bot found. > + > +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */ > +struct cxl_mbox_get_dc_config_out { > + u8 avail_region_count; > + u8 regions_returned; > + u8 rsvd[6]; > + /* See CXL 3.1 Table 8-165 */ > + struct cxl_dc_region_config { > + __le64 region_base; > + __le64 region_decode_length; > + __le64 region_length; > + __le64 region_block_size; > + __le32 region_dsmad_handle; > + u8 flags; > + u8 rsvd[3]; > + } __packed region[] __counted_by(regions_retunred); returned > + /* Trailing fields unused */ > +} __packed;