Re: [PATCH v3 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Conor,

Thank you for your review!

On Thu, Oct 24, 2024 at 06:01:11PM +0100, Conor Dooley wrote:
> On Wed, Oct 23, 2024 at 03:53:51PM -0500, Grant Peltier wrote:
> > + [...]
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - renesas,isl68220
> > +      - renesas,isl68221
> > +      - renesas,isl68222
> > +      - renesas,isl68223
> > +      - renesas,isl68224
> > +      - renesas,isl68225
> > +      - renesas,isl68226
> > +      - renesas,isl68227
> > +      - renesas,isl68229
> > +      - renesas,isl68233
> > +      - renesas,isl68239
> > +      - renesas,isl69222
> > +      - renesas,isl69223
> > +      - renesas,isl69224
> > +      - renesas,isl69225
> > +      - renesas,isl69227
> > +      - renesas,isl69228
> > +      - renesas,isl69234
> > +      - renesas,isl69236
> > +      - renesas,isl69239
> > +      - renesas,isl69242
> > +      - renesas,isl69243
> > +      - renesas,isl69247
> > +      - renesas,isl69248
> > +      - renesas,isl69254
> > +      - renesas,isl69255
> > +      - renesas,isl69256
> > +      - renesas,isl69259
> > +      - renesas,isl69260
> > +      - renesas,isl69268
> > +      - renesas,isl69269
> > +      - renesas,isl69298
> > +      - renesas,raa228000
> > +      - renesas,raa228004
> > +      - renesas,raa228006
> > +      - renesas,raa228228
> > +      - renesas,raa229001
> > +      - renesas,raa229004
> 
> Damn, that;s a list and a half, innit! Looking briefly at the driver
> change, the match data implies that quite a few of these actually would
> be suitable for fallback compatibles.

Yes, there are quite a few part numbers (and likely to be more in the
future). My intention was to make the driver more user friendly since the
variants listed in the driver do not map to something in any of the
datasheets. So using those instead would require users to inspect the
source of the driver instead of simply referencing their part number(s).

> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0
> > +
> > +patternProperties:
> > +  "^channel@([0-3])$":
> > +    type: object
> > +    description:
> > +      Container for properties specific to a particular channel (rail).
> > +
> > +    properties:
> > +      reg:
> > +        description: The channel (rail) index.
> > +        items:
> > +          minimum: 0
> > +          maximum: 3
> > +
> > +      renesas,vout-voltage-divider:
> 
> There's already a binding for voltage dividers: voltage-divider.yaml
> That said, I have no idea how that would work with an extant driver for
> the hardware like we have here. I'd imagine it would really have to be
> used with iio-hwmon? + Peter and Jonathan, since I don't know how the
> driver side of using the voltage divider works.

In his recent revier, Guenter requested using a standard voltage divider
schema as well. I see there is an implementation in maxim,maxim20730.yaml
but that differs from the one in voltage-divider.yaml. Should I opt to
match maxim,maxim20730.yaml?

> 
> > +        description:
> > +          Resistances of a voltage divider placed between Vout and the voltage
> > +          sense pin for the given channel (rail). It has two numbers
> > +          representing the resistances of the voltage divider provided as
> > +          <R1 R2> which yields an adjusted Vout as
> > +          Vout_adj = Vout * (R1 + R2) / R2 given the original Vout as reported
> > +          by the Vsense pin.
> > +        $ref: /schemas/types.yaml#/definitions/uint32-array
> > +        minItems: 2
> > +        maxItems: 2
> > +
> > +    required:
> > +      - reg
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      isl68239@60 {
> > +        compatible = "renesas,isl68239";
> > +        reg = <0x60>;
> > +      };
> > +    };
> 
> Without any channels, what does this actually do? If you've got no
> channels you cannot measure anything making this example invalid?
> 
> Thanks,
> Conor.
> 
> > + [...]

The channel structures are optional to allow users to arbitrarily define
voltage dividers for any particular rail. Omitting the channel definitions
still allow the device to be instantiated and probed as an I2C device
along with all related hwmon PMBus telemetry dictated by the part variant.

Thanks again,
Grant





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux