From: Xinpeng Sun <xinpeng.sun@xxxxxxxxx> Fully implement QuickSPI driver probe/remove callbacks, interrupt handler, integrate HIDSPI protocol, enumerate HID device and register HID device. Co-developed-by: Even Xu <even.xu@xxxxxxxxx> Signed-off-by: Even Xu <even.xu@xxxxxxxxx> Signed-off-by: Xinpeng Sun <xinpeng.sun@xxxxxxxxx> Tested-by: Rui Zhang <rui1.zhang@xxxxxxxxx> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx> --- .../intel-quickspi/pci-quickspi.c | 254 ++++++++++++++++++ 1 file changed, 254 insertions(+) diff --git a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c index 16789bdb1235..0dae1a07b728 100644 --- a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c +++ b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c @@ -14,6 +14,8 @@ #include "intel-thc-hw.h" #include "quickspi-dev.h" +#include "quickspi-hid.h" +#include "quickspi-protocol.h" struct quickspi_driver_data mtl = { .max_packet_size_value = MAX_PACKET_SIZE_VALUE_MTL, @@ -224,6 +226,37 @@ static irqreturn_t quickspi_irq_quick_handler(int irq, void *dev_id) return IRQ_WAKE_THREAD; } +/** + * try_recover - Try to recovery THC and Device + * @qsdev: pointer to quickspi device + * + * This function is a error handler, called when fatal error happens. + * It try to reset Touch Device and re-configure THC to recovery + * transferring between Device and THC. + * + * Return: 0 if successful or error code on failed. + */ +static int try_recover(struct quickspi_device *qsdev) +{ + int ret; + + ret = reset_tic(qsdev); + if (ret) { + dev_err(qsdev->dev, "Reset touch device failed, ret = %d\n", ret); + return ret; + } + + thc_dma_unconfigure(qsdev->thc_hw); + + ret = thc_dma_configure(qsdev->thc_hw); + if (ret) { + dev_err(qsdev->dev, "Re-configure THC DMA failed, ret = %d\n", ret); + return ret; + } + + return 0; +} + /** * quickspi_irq_thread_handler - IRQ thread handler of quickspi driver * @@ -235,15 +268,52 @@ static irqreturn_t quickspi_irq_quick_handler(int irq, void *dev_id) static irqreturn_t quickspi_irq_thread_handler(int irq, void *dev_id) { struct quickspi_device *qsdev = dev_id; + size_t input_len; + int read_finished = 0; + int err_recover = 0; int int_mask; + int ret; if (qsdev->state == QUICKSPI_DISABLED) return IRQ_HANDLED; int_mask = thc_interrupt_handler(qsdev->thc_hw); + if (int_mask & BIT(THC_FATAL_ERR_INT) || int_mask & BIT(THC_TXN_ERR_INT)) { + err_recover = 1; + goto end; + } + + if (int_mask & BIT(THC_NONDMA_INT)) { + if (qsdev->state == QUICKSPI_RESETING) { + qsdev->reset_ack = true; + wake_up_interruptible(&qsdev->reset_ack_wq); + } else { + qsdev->nondma_int_received = true; + wake_up_interruptible(&qsdev->nondma_int_received_wq); + } + } + + if (int_mask & BIT(THC_RXDMA2_INT)) { + while (!read_finished) { + ret = thc_rxdma_read(qsdev->thc_hw, THC_RXDMA2, qsdev->input_buf, + &input_len, &read_finished); + if (ret) { + err_recover = 1; + goto end; + } + + quickspi_handle_input_data(qsdev, input_len); + } + } + +end: thc_interrupt_enable(qsdev->thc_hw, true); + if (err_recover) + if (try_recover(qsdev)) + qsdev->state = QUICKSPI_DISABLED; + return IRQ_HANDLED; } @@ -278,6 +348,12 @@ static struct quickspi_device *quickspi_dev_init(struct pci_dev *pdev, void __io qsdev->mem_addr = mem_addr; qsdev->driver_data = (struct quickspi_driver_data *)id->driver_data; + init_waitqueue_head(&qsdev->reset_ack_wq); + init_waitqueue_head(&qsdev->nondma_int_received_wq); + init_waitqueue_head(&qsdev->report_desc_got_wq); + init_waitqueue_head(&qsdev->get_report_cmpl_wq); + init_waitqueue_head(&qsdev->set_report_cmpl_wq); + /* thc hw init */ qsdev->thc_hw = thc_dev_init(qsdev->dev, qsdev->mem_addr); if (IS_ERR(qsdev->thc_hw)) { @@ -298,6 +374,37 @@ static struct quickspi_device *quickspi_dev_init(struct pci_dev *pdev, void __io return ERR_PTR(ret); } + /* THC config for input/output address */ + thc_spi_input_output_address_config(qsdev->thc_hw, + qsdev->input_report_hdr_addr, + qsdev->input_report_bdy_addr, + qsdev->output_report_addr); + + /* THC config for spi read operation */ + ret = thc_spi_read_config(qsdev->thc_hw, qsdev->spi_freq_val, + qsdev->spi_read_io_mode, + qsdev->spi_read_opcode, + qsdev->spi_packet_size); + if (ret) { + dev_err(dev, "thc_spi_read_config failed, ret = %d\n", ret); + return ERR_PTR(ret); + } + + /* THC config for spi write operation */ + ret = thc_spi_write_config(qsdev->thc_hw, qsdev->spi_freq_val, + qsdev->spi_write_io_mode, + qsdev->spi_write_opcode, + qsdev->spi_packet_size, + qsdev->performance_limit); + if (ret) { + dev_err(dev, "thc_spi_write_config failed, ret = %d\n", ret); + return ERR_PTR(ret); + } + + thc_ltr_config(qsdev->thc_hw, + qsdev->active_ltr_val, + qsdev->low_power_ltr_val); + thc_interrupt_config(qsdev->thc_hw); thc_interrupt_enable(qsdev->thc_hw, true); @@ -315,6 +422,101 @@ static struct quickspi_device *quickspi_dev_init(struct pci_dev *pdev, void __io static void quickspi_dev_deinit(struct quickspi_device *qsdev) { thc_interrupt_enable(qsdev->thc_hw, false); + thc_ltr_unconfig(qsdev->thc_hw); +} + +/** + * quickspi_dma_init - Configure THC DMA for quickspi device + * @qsdev: pointer to the quickspi device structure + * + * This function uses TIC's parameters(such as max input length, max output + * length) to allocate THC DMA buffers and configure THC DMA engines. + * + * Return: 0 if successful or error code on failed. + */ +static int quickspi_dma_init(struct quickspi_device *qsdev) +{ + int ret; + + ret = thc_dma_set_max_packet_sizes(qsdev->thc_hw, 0, + le16_to_cpu(qsdev->dev_desc.max_input_len), + le16_to_cpu(qsdev->dev_desc.max_output_len), + 0); + if (ret) + return ret; + + ret = thc_dma_allocate(qsdev->thc_hw); + if (ret) { + dev_err(qsdev->dev, "Allocate THC DMA buffer failed, ret = %d\n", ret); + return ret; + } + + /* Enable RxDMA */ + ret = thc_dma_configure(qsdev->thc_hw); + if (ret) { + dev_err(qsdev->dev, "Configure THC DMA failed, ret = %d\n", ret); + thc_dma_unconfigure(qsdev->thc_hw); + thc_dma_release(qsdev->thc_hw); + return ret; + } + + return ret; +} + +/** + * quickspi_dma_deinit - Release THC DMA for quickspi device + * @qsdev: pointer to the quickspi device structure + * + * Stop THC DMA engines and release all DMA buffers. + * + */ +static void quickspi_dma_deinit(struct quickspi_device *qsdev) +{ + thc_dma_unconfigure(qsdev->thc_hw); + thc_dma_release(qsdev->thc_hw); +} + +/** + * quickspi_alloc_report_buf - Alloc report buffers + * @qsdev: pointer to the quickspi device structure + * + * Allocate report descritpor buffer, it will be used for restore TIC HID + * report descritpor. + * + * Allocate input report buffer, it will be used for receive HID input report + * data from TIC. + * + * Allocate output report buffer, it will be used for store HID output report, + * such as set feature. + * + * Return: 0 if successful or error code on failed. + */ +static int quickspi_alloc_report_buf(struct quickspi_device *qsdev) +{ + size_t max_report_len; + size_t max_input_len; + + qsdev->report_descriptor = devm_kzalloc(qsdev->dev, + le16_to_cpu(qsdev->dev_desc.rep_desc_len), + GFP_KERNEL); + if (!qsdev->report_descriptor) + return -ENOMEM; + + max_input_len = max(le16_to_cpu(qsdev->dev_desc.rep_desc_len), + le16_to_cpu(qsdev->dev_desc.max_input_len)); + + qsdev->input_buf = devm_kzalloc(qsdev->dev, max_input_len, GFP_KERNEL); + if (!qsdev->input_buf) + return -ENOMEM; + + max_report_len = max(le16_to_cpu(qsdev->dev_desc.max_output_len), + le16_to_cpu(qsdev->dev_desc.max_input_len)); + + qsdev->report_buf = devm_kzalloc(qsdev->dev, max_report_len, GFP_KERNEL); + if (!qsdev->report_buf) + return -ENOMEM; + + return 0; } /* @@ -323,6 +525,18 @@ static void quickspi_dev_deinit(struct quickspi_device *qsdev) * @pdev: point to pci device * @id: point to pci_device_id structure * + * This function initializes THC and HIDSPI device, the flow is: + * - do THC pci device initialization + * - query HIDSPI ACPI parameters + * - configure THC to HIDSPI mode + * - go through HIDSPI enumeration flow + * |- reset HIDSPI device + * |- read device descriptor + * - enable THC interrupt and DMA + * - read report descriptor + * - register HID device + * - enable runtime power management + * * Return 0 if success or error code on failure. */ static int quickspi_probe(struct pci_dev *pdev, @@ -386,8 +600,42 @@ static int quickspi_probe(struct pci_dev *pdev, goto dev_deinit; } + ret = reset_tic(qsdev); + if (ret) { + dev_err(&pdev->dev, "Reset Touch Device failed, ret = %d\n", ret); + goto dev_deinit; + } + + ret = quickspi_alloc_report_buf(qsdev); + if (ret) { + dev_err(&pdev->dev, "Alloc report buffers failed, ret= %d\n", ret); + goto dev_deinit; + } + + ret = quickspi_dma_init(qsdev); + if (ret) { + dev_err(&pdev->dev, "Setup THC DMA failed, ret= %d\n", ret); + goto dev_deinit; + } + + ret = quickspi_get_report_descriptor(qsdev); + if (ret) { + dev_err(&pdev->dev, "Get report descriptor failed, ret = %d\n", ret); + goto dma_deinit; + } + + ret = quickspi_hid_probe(qsdev); + if (ret) { + dev_err(&pdev->dev, "Failed to register HID device, ret = %d\n", ret); + goto dma_deinit; + } + + dev_dbg(&pdev->dev, "QuickSPI probe success\n"); + return 0; +dma_deinit: + quickspi_dma_deinit(qsdev); dev_deinit: quickspi_dev_deinit(qsdev); unmap_io_region: @@ -415,6 +663,9 @@ static void quickspi_remove(struct pci_dev *pdev) if (!qsdev) return; + quickspi_hid_remove(qsdev); + quickspi_dma_deinit(qsdev); + quickspi_dev_deinit(qsdev); pcim_iounmap_regions(pdev, BIT(0)); @@ -439,6 +690,9 @@ static void quickspi_shutdown(struct pci_dev *pdev) if (!qsdev) return; + /* Must stop DMA before reboot to avoid DMA entering into unknown state */ + quickspi_dma_deinit(qsdev); + quickspi_dev_deinit(qsdev); } -- 2.40.1