[PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



adaq4370-4 (2MSPS) and adaq4380-4 (4MSPS) are quad-channel precision data
acquisition signal chain μModule solutions compatible with the ad738x
family, with the following differences:

- configurable gain in front of each 4 adc
- internal reference is 3V derived from refin-supply (5V)
- additional supplies

To configure the gain a new patternProperties is added to describe each
channel. It is restricted to adaq devices.

Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
---
 .../devicetree/bindings/iio/adc/adi,ad7380.yaml    | 117 +++++++++++++++++++++
 1 file changed, 117 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index 74d82721637c..3007d8e39684 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -25,6 +25,8 @@ description: |
   * https://www.analog.com/en/products/ad7386-4.html
   * https://www.analog.com/en/products/ad7387-4.html
   * https://www.analog.com/en/products/ad7388-4.html
+  * https://www.analog.com/en/products/adaq4370-4.html
+  * https://www.analog.com/en/products/adaq4380-4.html
 
 
 $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -46,6 +48,8 @@ properties:
       - adi,ad7386-4
       - adi,ad7387-4
       - adi,ad7388-4
+      - adi,adaq4370-4
+      - adi,adaq4380-4
 
   reg:
     maxItems: 1
@@ -59,6 +63,9 @@ properties:
   vlogic-supply: true
   refio-supply: true
   refin-supply: true
+  vs-p-supply: true
+  vs-n-supply: true
+  ldo-supply: true
 
   aina-supply:
     description:
@@ -86,12 +93,43 @@ properties:
       specify the ALERT interrupt.
     maxItems: 1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
 required:
   - compatible
   - reg
   - vcc-supply
   - vlogic-supply
 
+patternProperties:
+  "^channel@([0-3])$":
+    $ref: adc.yaml
+    type: object
+
+    properties:
+      reg:
+        description:
+          The channel number. From 0 to 3 corresponding to channels A,B,C,D
+        items:
+          minimum: 0
+          maximum: 3
+
+      adi,gain-milli:
+        description:
+          The hardware gain applied to the ADC input (in milli units).
+          If not present, default to 1000 (no actual gain applied).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 1000
+
+    required:
+      - reg
+
+    additionalProperties: false
+
 unevaluatedProperties: false
 
 allOf:
@@ -128,7 +166,21 @@ allOf:
         ainc-supply: false
         aind-supply: false
 
+  # Using channel to declare gain property only applies to adaq devices
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,adaq4370-4
+                - adi,adaq4380-4
+    then:
+      patternProperties:
+        "^channel@([0-3])$": false
+
   # ad7380-4 uses refin-supply as external reference.
+  # adaq devices use internal reference only, derived from refin-supply
   # All other chips from ad738x family use refio as optional external reference.
   # When refio-supply is omitted, internal reference is used.
   - if:
@@ -136,6 +188,8 @@ allOf:
         compatible:
           enum:
             - adi,ad7380-4
+            - adi,adaq4370-4
+            - adi,adaq4380-4
     then:
       properties:
         refio-supply: false
@@ -145,6 +199,24 @@ allOf:
       properties:
         refin-supply: false
 
+  # adaq devices need more supplies
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,adaq4370-4
+            - adi,adaq4380-4
+    then:
+      required:
+        - vs-p-supply
+        - vs-n-supply
+        - ldo-supply
+    else:
+      properties:
+        vs-p-supply: false
+        vs-n-supply: false
+        ldo-supply: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -169,3 +241,48 @@ examples:
             refio-supply = <&supply_2_5V>;
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,adaq4380-4";
+            reg = <0>;
+
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            vcc-supply = <&supply_3_3V>;
+            vlogic-supply = <&supply_3_3V>;
+            refin-supply = <&supply_5V>;
+            vs-p-supply = <&supply_5V>;
+            vs-n-supply = <&supply_0V>;
+            ldo-supply = <&supply_5V>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,gain-milli = <300>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,gain-milli = <600>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,gain-milli = <1000>;
+            };
+        };
+    };

-- 
2.46.0





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux