From: Navneet Singh <navneet.singh@xxxxxxxxx>
Endpoint decoder mode is used to represent the partition the decoder
points to such as ram or pmem.
Expand the mode to allow a decoder to point to a specific DC partition
(Region).
Signed-off-by: Navneet Singh <navneet.singh@xxxxxxxxx>
Co-developed-by: Ira Weiny <ira.weiny@xxxxxxxxx>
Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
---
Changes:
[iweiny: prevent creation of region on shareable DC partitions]
[Fan: change mode range logic]
[Fan: use !resource_size()]
[djiang: use the static mode name string array in mode_store()]
[Jonathan: remove rc check from mode to region index]
[Jonathan: clarify decoder mode 'mixed']
[djbw: drop cleanup patch and just follow the convention in cxl_dpa_set_mode()]
[fan: make dcd resource size check similar to other partitions]
[djbw, jonathan, fan: remove mode range check from dc_mode_to_region_index]
[iweiny: push sysfs versions to 6.12]
---
Documentation/ABI/testing/sysfs-bus-cxl | 21 ++++++++++----------
drivers/cxl/core/hdm.c | 17 ++++++++++++++++
drivers/cxl/core/port.c | 10 +++++-----
drivers/cxl/cxl.h | 35 ++++++++++++++++++---------------
4 files changed, 52 insertions(+), 31 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index b865eefdb74c..661dab99183f 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -361,23 +361,24 @@ Description:
What: /sys/bus/cxl/devices/decoderX.Y/mode
-Date: May, 2022
-KernelVersion: v6.0
+Date: May, 2022, October 2024
+KernelVersion: v6.0, v6.12 (dcY)
Contact: linux-cxl@xxxxxxxxxxxxxxx
Description:
(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
translates from a host physical address range, to a device local
address range. Device-local address ranges are further split
- into a 'ram' (volatile memory) range and 'pmem' (persistent
- memory) range. The 'mode' attribute emits one of 'ram', 'pmem',
- 'mixed', or 'none'. The 'mixed' indication is for error cases
- when a decoder straddles the volatile/persistent partition
- boundary, and 'none' indicates the decoder is not actively
- decoding, or no DPA allocation policy has been set.
+ into a 'ram' (volatile memory) range, 'pmem' (persistent
+ memory) range, or Dynamic Capacity (DC) range. The 'mode'
+ attribute emits one of 'ram', 'pmem', 'dcY', 'mixed', or
+ 'none'. The 'mixed' indication is for error cases when a
+ decoder straddles partition boundaries, and 'none' indicates
+ the decoder is not actively decoding, or no DPA allocation
+ policy has been set.
'mode' can be written, when the decoder is in the 'disabled'
- state, with either 'ram' or 'pmem' to set the boundaries for the
- next allocation.
+ state, with 'ram', 'pmem', or 'dcY' to set the boundaries for
+ the next allocation.
What: /sys/bus/cxl/devices/decoderX.Y/dpa_resource
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index 8c7f941eaba1..b368babb55d9 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -551,6 +551,7 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
switch (mode) {
case CXL_DECODER_RAM:
case CXL_DECODER_PMEM:
+ case CXL_DECODER_DC0 ... CXL_DECODER_DC7:
break;
default:
dev_dbg(dev, "unsupported mode: %d\n", mode);
@@ -578,6 +579,22 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
goto out;
}
+ if (mode >= CXL_DECODER_DC0 && mode <= CXL_DECODER_DC7) {
+ struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+
+ rc = dc_mode_to_region_index(mode);
+ if (!resource_size(&cxlds->dc_res[rc])) {
+ dev_dbg(dev, "no available dynamic capacity\n");
+ rc = -ENXIO;
+ goto out;
+ }
+ if (mds->dc_region[rc].shareable) {
+ dev_err(dev, "DC region %d is shareable\n", rc);
+ rc = -EINVAL;
+ goto out;
+ }
+ }
+
cxled->mode = mode;
rc = 0;
out:
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 85b912c11f04..23b4f266a83a 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -205,11 +205,11 @@ static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
enum cxl_decoder_mode mode;
ssize_t rc;
- if (sysfs_streq(buf, "pmem"))
- mode = CXL_DECODER_PMEM;
- else if (sysfs_streq(buf, "ram"))
- mode = CXL_DECODER_RAM;
- else
+ for (mode = CXL_DECODER_RAM; mode < CXL_DECODER_MIXED; mode++)
+ if (sysfs_streq(buf, cxl_decoder_mode_names[mode]))
+ break;
+
+ if (mode >= CXL_DECODER_MIXED)
return -EINVAL;
rc = cxl_dpa_set_mode(cxled, mode);
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 8b7099c38a40..cbaacbe0f36d 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -365,6 +365,9 @@ struct cxl_decoder {
/*
* CXL_DECODER_DEAD prevents endpoints from being reattached to regions
* while cxld_unregister() is running
+ *
+ * NOTE: CXL_DECODER_RAM must be second and CXL_DECODER_MIXED must be last.
+ * See mode_store()
*/
enum cxl_decoder_mode {
CXL_DECODER_NONE,
@@ -382,25 +385,25 @@ enum cxl_decoder_mode {
CXL_DECODER_DEAD,
};
+static const char * const cxl_decoder_mode_names[] = {
+ [CXL_DECODER_NONE] = "none",
+ [CXL_DECODER_RAM] = "ram",
+ [CXL_DECODER_PMEM] = "pmem",
+ [CXL_DECODER_DC0] = "dc0",
+ [CXL_DECODER_DC1] = "dc1",
+ [CXL_DECODER_DC2] = "dc2",
+ [CXL_DECODER_DC3] = "dc3",
+ [CXL_DECODER_DC4] = "dc4",
+ [CXL_DECODER_DC5] = "dc5",
+ [CXL_DECODER_DC6] = "dc6",
+ [CXL_DECODER_DC7] = "dc7",
+ [CXL_DECODER_MIXED] = "mixed",
+};
+
static inline const char *cxl_decoder_mode_name(enum cxl_decoder_mode mode)
{
- static const char * const names[] = {
- [CXL_DECODER_NONE] = "none",
- [CXL_DECODER_RAM] = "ram",
- [CXL_DECODER_PMEM] = "pmem",
- [CXL_DECODER_DC0] = "dc0",
- [CXL_DECODER_DC1] = "dc1",
- [CXL_DECODER_DC2] = "dc2",
- [CXL_DECODER_DC3] = "dc3",
- [CXL_DECODER_DC4] = "dc4",
- [CXL_DECODER_DC5] = "dc5",
- [CXL_DECODER_DC6] = "dc6",
- [CXL_DECODER_DC7] = "dc7",
- [CXL_DECODER_MIXED] = "mixed",
- };
-
if (mode >= CXL_DECODER_NONE && mode <= CXL_DECODER_MIXED)
- return names[mode];
+ return cxl_decoder_mode_names[mode];
return "mixed";
}
--
2.46.0
