[PATCH 5/6] iio: adc: ad7380: fix supplies for ad7380-4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ad7380-4 is the only device in the family that does not have an internal
reference. It uses "refin" as a required external reference.
All other devices in the family use "refio"" as an optional external
reference.

Fixes: 737413da8704 ("iio: adc: ad7380: add support for ad738x-4 4 channels variants")
Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
---
 drivers/iio/adc/ad7380.c | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/ad7380.c b/drivers/iio/adc/ad7380.c
index 9ef44b605144..e9784769baa9 100644
--- a/drivers/iio/adc/ad7380.c
+++ b/drivers/iio/adc/ad7380.c
@@ -89,6 +89,7 @@ struct ad7380_chip_info {
 	bool has_mux;
 	const char * const *supplies;
 	unsigned int num_supplies;
+	bool external_ref_only;
 	const char * const *vcm_supplies;
 	unsigned int num_vcm_supplies;
 	const unsigned long *available_scan_masks;
@@ -431,6 +432,7 @@ static const struct ad7380_chip_info ad7380_4_chip_info = {
 	.num_simult_channels = 4,
 	.supplies = ad7380_supplies,
 	.num_supplies = ARRAY_SIZE(ad7380_supplies),
+	.external_ref_only = true,
 	.available_scan_masks = ad7380_4_channel_scan_masks,
 	.timing_specs = &ad7380_4_timing,
 };
@@ -1047,17 +1049,31 @@ static int ad7380_probe(struct spi_device *spi)
 				     "Failed to enable power supplies\n");
 	msleep(T_POWERUP_MS);
 
-	/*
-	 * If there is no REFIO supply, then it means that we are using
-	 * the internal 2.5V reference, otherwise REFIO is reference voltage.
-	 */
-	ret = devm_regulator_get_enable_read_voltage(&spi->dev, "refio");
-	if (ret < 0 && ret != -ENODEV)
-		return dev_err_probe(&spi->dev, ret,
-				     "Failed to get refio regulator\n");
+	if (st->chip_info->external_ref_only) {
+		ret = devm_regulator_get_enable_read_voltage(&spi->dev,
+							     "refin");
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Failed to get refin regulator\n");
+
+		st->vref_mv = ret / 1000;
 
-	external_ref_en = ret != -ENODEV;
-	st->vref_mv = external_ref_en ? ret / 1000 : AD7380_INTERNAL_REF_MV;
+		/* these chips don't have a register bit for this */
+		external_ref_en = false;
+	} else {
+		/*
+		 * If there is no REFIO supply, then it means that we are using
+		 * the internal reference, otherwise REFIO is reference voltage.
+		 */
+		ret = devm_regulator_get_enable_read_voltage(&spi->dev,
+							     "refio");
+		if (ret < 0 && ret != -ENODEV)
+			return dev_err_probe(&spi->dev, ret,
+					     "Failed to get refio regulator\n");
+
+		external_ref_en = ret != -ENODEV;
+		st->vref_mv = external_ref_en ? ret / 1000 : AD7380_INTERNAL_REF_MV;
+	}
 
 	if (st->chip_info->num_vcm_supplies > ARRAY_SIZE(st->vcm_mv))
 		return dev_err_probe(&spi->dev, -EINVAL,

-- 
2.46.0





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux