[PATCH v13 20/40] arm64/mm: Handle GCS data aborts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All GCS operations at EL0 must happen on a page which is marked as
having UnprivGCS access, including read operations.  If a GCS operation
attempts to access a page without this then it will generate a data
abort with the GCS bit set in ESR_EL1.ISS2.

EL0 may validly generate such faults, for example due to copy on write
which will cause the GCS data to be stored in a read only page with no
GCS permissions until the actual copy happens.  Since UnprivGCS allows
both reads and writes to the GCS (though only through GCS operations) we
need to ensure that the memory management subsystem handles GCS accesses
as writes at all times.  Do this by adding FAULT_FLAG_WRITE to any GCS
page faults, adding handling to ensure that invalid cases are identfied
as such early so the memory management core does not think they will
succeed.  The core cannot distinguish between VMAs which are generally
writeable and VMAs which are only writeable through GCS operations.

EL1 may validly write to EL0 GCS for management purposes (eg, while
initialising with cap tokens).

We also report any GCS faults in VMAs not marked as part of a GCS as
access violations, causing a fault to be delivered to userspace if it
attempts to do GCS operations outside a GCS.

Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@xxxxxxxxxx>
Reviewed-by: Catalin Marinas <catalin.marinas@xxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 arch/arm64/mm/fault.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 8b281cf308b3..c2f89a678ac0 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -504,6 +504,14 @@ static bool fault_from_pkey(unsigned long esr, struct vm_area_struct *vma,
 			false);
 }
 
+static bool is_gcs_fault(unsigned long esr)
+{
+	if (!esr_is_data_abort(esr))
+		return false;
+
+	return ESR_ELx_ISS2(esr) & ESR_ELx_GCS;
+}
+
 static bool is_el0_instruction_abort(unsigned long esr)
 {
 	return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_LOW;
@@ -518,6 +526,23 @@ static bool is_write_abort(unsigned long esr)
 	return (esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM);
 }
 
+static bool is_invalid_gcs_access(struct vm_area_struct *vma, u64 esr)
+{
+	if (!system_supports_gcs())
+		return false;
+
+	if (unlikely(is_gcs_fault(esr))) {
+		/* GCS accesses must be performed on a GCS page */
+		if (!(vma->vm_flags & VM_SHADOW_STACK))
+			return true;
+	} else if (unlikely(vma->vm_flags & VM_SHADOW_STACK)) {
+		/* Only GCS operations can write to a GCS page */
+		return esr_is_data_abort(esr) && is_write_abort(esr);
+	}
+
+	return false;
+}
+
 static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 				   struct pt_regs *regs)
 {
@@ -554,6 +579,14 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 		/* It was exec fault */
 		vm_flags = VM_EXEC;
 		mm_flags |= FAULT_FLAG_INSTRUCTION;
+	} else if (is_gcs_fault(esr)) {
+		/*
+		 * The GCS permission on a page implies both read and
+		 * write so always handle any GCS fault as a write fault,
+		 * we need to trigger CoW even for GCS reads.
+		 */
+		vm_flags = VM_WRITE;
+		mm_flags |= FAULT_FLAG_WRITE;
 	} else if (is_write_abort(esr)) {
 		/* It was write fault */
 		vm_flags = VM_WRITE;
@@ -587,6 +620,13 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 	if (!vma)
 		goto lock_mmap;
 
+	if (is_invalid_gcs_access(vma, esr)) {
+		vma_end_read(vma);
+		fault = 0;
+		si_code = SEGV_ACCERR;
+		goto bad_area;
+	}
+
 	if (!(vma->vm_flags & vm_flags)) {
 		vma_end_read(vma);
 		fault = 0;

-- 
2.39.2





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux