Fix a missing end of phrase in the documentation. It describes the ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained. Also, fix grammar issues by using simple present tense instead of present continuous. Reviewed-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx> --- Change in v2: - Add grammar issue fixes. --- Documentation/networking/ethtool-netlink.rst | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index ba90457b8b2d..295563e91082 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -1768,7 +1768,7 @@ Kernel response contents: When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies the operational state of the PoDL PSE functions. The operational state of the PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` -action. This option is corresponding to ``IEEE 802.3-2018`` 30.15.1.1.2 +action. This attribute corresponds to ``IEEE 802.3-2018`` 30.15.1.1.2 aPoDLPSEAdminState. Possible values are: .. kernel-doc:: include/uapi/linux/ethtool.h @@ -1782,8 +1782,8 @@ The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` implementing When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies the power detection status of the PoDL PSE. The status depend on internal PSE -state machine and automatic PD classification support. This option is -corresponding to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. +state machine and automatic PD classification support. This attribute +corresponds to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. Possible values are: .. kernel-doc:: include/uapi/linux/ethtool.h @@ -1797,12 +1797,13 @@ The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing When set, the optional ``ETHTOOL_A_C33_PSE_PW_CLASS`` attribute identifies the power class of the C33 PSE. It depends on the class negotiated between -the PSE and the PD. This option is corresponding to ``IEEE 802.3-2022`` +the PSE and the PD. This attribute corresponds to ``IEEE 802.3-2022`` 30.9.1.1.8 aPSEPowerClassification. When set, the optional ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` attribute identifies -This option is corresponding to ``IEEE 802.3-2022`` 30.9.1.1.23 aPSEActualPower. -Actual power is reported in mW. +the actual power drawn by the C33 PSE. This attribute corresponds to +``IEEE 802.3-2022`` 30.9.1.1.23 aPSEActualPower. Actual power is reported +in mW. When set, the optional ``ETHTOOL_A_C33_PSE_EXT_STATE`` attribute identifies the extended error state of the C33 PSE. Possible values are: @@ -1851,7 +1852,7 @@ Request contents: ====================================== ====== ============================= When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used -to control PoDL PSE Admin functions. This option is implementing +to control PoDL PSE Admin functions. This option implements ``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values. -- 2.34.1
