On 2024/8/28 下午12:59, Dandan Zhang wrote:
From: Bibo Mao <maobibo@xxxxxxxxxxx>
Add documentation topic for using pv_virt when running as a guest
on KVM hypervisor.
Signed-off-by: Bibo Mao <maobibo@xxxxxxxxxxx>
Signed-off-by: Xianglai Li <lixianglai@xxxxxxxxxxx>
Co-developed-by: Mingcong Bai <jeffbai@xxxxxxx>
Signed-off-by: Mingcong Bai <jeffbai@xxxxxxx>
Link: https://lore.kernel.org/all/5c338084b1bcccc1d57dce9ddb1e7081@xxxxxxx/
Signed-off-by: Dandan Zhang <zhangdandan@xxxxxxxxxxxxx>
---
Documentation/virt/kvm/index.rst | 1 +
.../virt/kvm/loongarch/hypercalls.rst | 89 +++++++++++++++++++
Documentation/virt/kvm/loongarch/index.rst | 10 +++
MAINTAINERS | 1 +
4 files changed, 101 insertions(+)
create mode 100644 Documentation/virt/kvm/loongarch/hypercalls.rst
create mode 100644 Documentation/virt/kvm/loongarch/index.rst
diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst
index ad13ec55ddfe..9ca5a45c2140 100644
--- a/Documentation/virt/kvm/index.rst
+++ b/Documentation/virt/kvm/index.rst
@@ -14,6 +14,7 @@ KVM
s390/index
ppc-pv
x86/index
+ loongarch/index
locking
vcpu-requests
diff --git a/Documentation/virt/kvm/loongarch/hypercalls.rst b/Documentation/virt/kvm/loongarch/hypercalls.rst
new file mode 100644
index 000000000000..dd96ded5d17d
--- /dev/null
+++ b/Documentation/virt/kvm/loongarch/hypercalls.rst
@@ -0,0 +1,89 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+The LoongArch paravirtual interface
+===================================
+
+KVM hypercalls use the HVCL instruction with code 0x100 and the hypercall
+number is put in a0. Up to five arguments may be placed in registers a1 - a5.
+The return value is placed in v0 (an alias of a0).
+
+Source code for this interface can be found in arch/loongarch/kvm*.
+
+Querying for existence
+======================
+
+To determine if the host is running on KVM, we can utilize the cpucfg()
+function at index CPUCFG_KVM_BASE (0x40000000).
+
+The CPUCFG_KVM_BASE range, spanning from 0x40000000 to 0x400000FF, The
+CPUCFG_KVM_BASE range between 0x40000000 - 0x400000FF is marked as reserved.
+Consequently, all current and future processors will not implement any
+feature within this range.
+
+On a KVM-virtualized Linux system, a read operation on cpucfg() at index
+CPUCFG_KVM_BASE (0x40000000) returns the magic string 'KVM\0'.
+
+Once you have determined that your host is running on a paravirtualization-
+capable KVM, you may now use hypercalls as described below.
+
+KVM hypercall ABI
+=================
+
+The KVM hypercall ABI is simple, with one scratch register a0 (v0) and at most
+five generic registers (a1 - a5) used as input parameters. The FP (Floating-
+point) and vector registers are not utilized as input registers and must
+remain unmodified during a hypercall.
+
+Hypercall functions can be inlined as it only uses one scratch register.
+
+The parameters are as follows:
+
+ ======== ================ ================
+ Register IN OUT
+ ======== ================ ================
+ a0 function number Return code
+ a1 1st parameter -
+ a2 2nd parameter -
+ a3 3rd parameter -
+ a4 4th parameter -
+ a5 5th parameter -
+ ======== ================ ================
+
+The return codes may be one of the following:
+
+ ==== =========================
+ Code Meaning
+ ==== =========================
+ 0 Success
+ -1 Hypercall not implemented
+ -2 Bad Hypercall parameter
+ ==== =========================
+
+KVM Hypercalls Documentation
+============================
+
+The template for each hypercall is as follows:
+
+1. Hypercall name
+2. Purpose
+
+1. KVM_HCALL_FUNC_IPI
+------------------------
+
+:Purpose: Send IPIs to multiple vCPUs.
+
+- a0: KVM_HCALL_FUNC_IPI
+- a1: Lower part of the bitmap for destination physical CPUIDs
+- a2: Higher part of the bitmap for destination physical CPUIDs
+- a3: The lowest physical CPUID in the bitmap
+
+The hypercall lets a guest send multiple IPIs (Inter-Process Interrupts) with
+at most 128 destinations per hypercall. The destinations are represented in a
+bitmap contained in the first two input registers (a1 and a2).
+
+Bit 0 of a1 corresponds to the physical CPUID in the third input register (a3)
+and bit 1 corresponds to the physical CPUID in a3+1, and so on.
+
+PV IPI on LoongArch includes both PV IPI multicast sending and PV IPI receiving,
+and SWI is used for PV IPI inject since there is no VM-exits accessing SWI registers.
diff --git a/Documentation/virt/kvm/loongarch/index.rst b/Documentation/virt/kvm/loongarch/index.rst
new file mode 100644
index 000000000000..83387b4c5345
--- /dev/null
+++ b/Documentation/virt/kvm/loongarch/index.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+KVM for LoongArch systems
+=========================
+
+.. toctree::
+ :maxdepth: 2
+
+ hypercalls.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index 878dcd23b331..c267ad7cc2c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12294,6 +12294,7 @@ L: kvm@xxxxxxxxxxxxxxx
L: loongarch@xxxxxxxxxxxxxxx
S: Maintained
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
+F: Documentation/virt/kvm/loongarch/
F: arch/loongarch/include/asm/kvm*
F: arch/loongarch/include/uapi/asm/kvm*
F: arch/loongarch/kvm/
Reviewed-by: Bibo Mao <maobibo@xxxxxxxxxxx>