Re: [PATCH] doc: devicetree: Add bindings documentation for omap-des driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Joel,

I realise I'm a little late in replying to this, but there are a few
things that would be nice to fix up.

On Fri, Nov 08, 2013 at 12:37:09AM +0000, Joel Fernandes wrote:
> Add documentation for the generic OMAP DES crypto module describing the device
> tree bindings.
> 
> Signed-off-by: Joel Fernandes <joelf@xxxxxx>
> ---
>  .../devicetree/bindings/crypto/omap-des.txt        | 28 ++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/crypto/omap-des.txt
> 
> diff --git a/Documentation/devicetree/bindings/crypto/omap-des.txt b/Documentation/devicetree/bindings/crypto/omap-des.txt
> new file mode 100644
> index 0000000..0637647
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/omap-des.txt
> @@ -0,0 +1,28 @@
> +OMAP SoC DES crypto Module
> +
> +Required properties:
> +
> +- compatible : Should be "ti,omap4-des"

Nit: s/Should be/Should contain/

> +- ti,hwmods: Name of the hwmod associated with the DES module
> +- reg : Offset and length of the register set for the module
> +- interrupts : the interrupt-specifier for the DES module

Just to check: there's only one interrupt?

> +- clocks : phandle to the functional clock node of the DES module
> +- clock-names : Name of the functional clock

What name is expected here? The intent of clock-names is to describe
which clock input lines the clocks are wired to, so this should be
well-defined.

>From the looks of the example, the clock input is called "fck". Is that
correct?

When you have clock-names, the nicest thing to do is to define clocks
in terms of clock-names. Something like:

- clocks: A phandle + clock-specifier pair for each entry in
  clock-names.

- clock-names: Should contain:
  * "fck" for the functional clock

Which implies that the correct way to find clocks is to look in
clock-names first to find the clock's index, rather than grabbing the
clock by index. This makes it far easier to add/remove/change clocks in
future.

> +
> +Optional properties:
> +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
> +	Documentation/devicetree/bindings/dma/dma.txt

Similarly here it would be nice to have dmas refer to dma-names for
the description of which dmas exist.

> +- dma-names: DMA request names should include "tx" and "rx" if present
> +
> +Example:
> +	/* DRA7xx SoC */
> +	des: des@480a5000 {
> +		compatible = "ti,omap4-des";
> +		ti,hwmods = "des";
> +		reg = <0x480a5000 0xa0>;
> +		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> +		dmas = <&sdma 117>, <&sdma 116>;
> +		dma-names = "tx", "rx";
> +		clocks = <&l3_iclk_div>;
> +		clock-names = "fck";
> +	};

Cheers,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux