Re: [PATCH v2] Loongarch: KVM: Add KVM hypercalls documentation for LoongArch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[ Trivial comments inline.  You can feel free to ignore them since I
  know almost nothing about loongarch. ]

On 2024/8/26 13:47, Dandan Zhang wrote:
> From: Bibo Mao <maobibo@xxxxxxxxxxx>
> 
> Add documentation topic for using pv_virt when running as a guest
> on KVM hypervisor.
> 
> Signed-off-by: Bibo Mao <maobibo@xxxxxxxxxxx>
> Signed-off-by: Xianglai Li <lixianglai@xxxxxxxxxxx>
> Co-developed-by: Mingcong Bai <jeffbai@xxxxxxx>
> Signed-off-by: Mingcong Bai <jeffbai@xxxxxxx>
> Link: https://lore.kernel.org/all/5c338084b1bcccc1d57dce9ddb1e7081@xxxxxxx/
> Signed-off-by: Dandan Zhang <zhangdandan@xxxxxxxxxxxxx>
> ---
>  Documentation/virt/kvm/index.rst              |  1 +
>  .../virt/kvm/loongarch/hypercalls.rst         | 86 +++++++++++++++++++
>  Documentation/virt/kvm/loongarch/index.rst    | 10 +++
>  MAINTAINERS                                   |  1 +
>  4 files changed, 98 insertions(+)
>  create mode 100644 Documentation/virt/kvm/loongarch/hypercalls.rst
>  create mode 100644 Documentation/virt/kvm/loongarch/index.rst
> 
> diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst
> index ad13ec55ddfe..9ca5a45c2140 100644
> --- a/Documentation/virt/kvm/index.rst
> +++ b/Documentation/virt/kvm/index.rst
> @@ -14,6 +14,7 @@ KVM
>     s390/index
>     ppc-pv
>     x86/index
> +   loongarch/index
>  
>     locking
>     vcpu-requests
> diff --git a/Documentation/virt/kvm/loongarch/hypercalls.rst b/Documentation/virt/kvm/loongarch/hypercalls.rst
> new file mode 100644
> index 000000000000..58168dc7166c
> --- /dev/null
> +++ b/Documentation/virt/kvm/loongarch/hypercalls.rst
> @@ -0,0 +1,86 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +===================================
> +The LoongArch paravirtual interface
> +===================================
> +
> +KVM hypercalls use the HVCL instruction with code 0x100 and the hypercall
> +number is put in a0. Up to five arguments may be placed in registers a1 - a5.
> +The return value is placed in v0 (an alias of a0).
> +
> +Source code for this interface can be found in arch/loongarch/kvm*.
> +
> +Querying for existence
> +======================
> +
> +To determine if the host is running on KVM, we can utilize the cpucfg()
> +function at index CPUCFG_KVM_BASE (0x40000000).
> +
> +The CPUCPU_KVM_BASE range, spanning from 0x40000000 to 0x400000FF, The
> +CPUCPU_KVM_BASE range between 0x40000000 - 0x400000FF is marked as reserved.

What is CPUCPU_KVM_BASE? Grepping it in the code shows nothing.

> +Consequently, all current and future processors will not implement any
> +feature within this range.
> +
> +On a KVM-virtualized Linux system, a read operation on cpucfg() at index
> +CPUCFG_KVM_BASE (0x40000000) returns the magic string 'KVM\0'.
> +
> +Once you have determined that your host is running on a paravirtualization-
> +capable KVM, you may now use hypercalls as described below.
> +
> +KVM hypercall ABI
> +=================
> +
> +The KVM hypercall ABI is simple, with one scratch register a0 (v0) and at most
> +five generic registers (a1 - a5) used as input parameters. The FP (Floating-
> +point) and vector registers are not utilized as input registers and must
> +remain unmodified during a hypercall.
> +
> +Hypercall functions can be inlined as it only uses one scratch register.
> +
> +The parameters are as follows:
> +
> +        ========	================	================
> +	Register	IN			OUT
> +        ========	================	================
> +	a0		function number		Return code
> +	a1		1st parameter		-
> +	a2		2nd parameter		-
> +	a3		3rd parameter		-
> +	a4		4th parameter		-
> +	a5		5th parameter		-
> +        ========	================	================

Please consistently use tab.

> +
> +The return codes may be one of the following:
> +
> +	====		=========================
> +	Code		Meaning
> +	====		=========================
> +	0		Success
> +	-1		Hypercall not implemented
> +	-2		Bad Hypercall parameter
> +	====		=========================
> +
> +KVM Hypercalls Documentation
> +============================
> +
> +The template for each hypercall is as follows:
> +
> +1. Hypercall name
> +2. Purpose
> +
> +1. KVM_HCALL_FUNC_PV_IPI

Is it still a work-in-progress thing? I don't see it in mainline.

> +------------------------
> +
> +:Purpose: Send IPIs to multiple vCPUs.
> +
> +- a0: KVM_HCALL_FUNC_PV_IPI
> +- a1: Lower part of the bitmap for destination physical CPUIDs
> +- a2: Higher part of the bitmap for destination physical CPUIDs
> +- a3: The lowest physical CPUID in the bitmap

- Is it a feature that implements IPI broadcast with a PV method?
- Don't you need to *at least* specify which IPI to send by issuing this
  hypercall?

But again, as I said I know nothing about loongarch.  I might have
missed some obvious points.

> +
> +The hypercall lets a guest send multiple IPIs (Inter-Process Interrupts) with
> +at most 128 destinations per hypercall.The destinations are represented in a
                                          ^
Add a blank space.

> +bitmap contained in the first two input registers (a1 and a2).
> +
> +Bit 0 of a1 corresponds to the physical CPUID in the third input register (a3)
> +and bit 1 corresponds to the physical CPUID in a3+1 (a4), and so on.

This looks really confusing.  "Bit 63 of a1 corresponds to the physical
CPUID in a3+63 (a66)"?

Zenghui




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux