> -----Original Message----- > From: Linuxppc-dev [mailto:linuxppc-dev- > bounces+bharat.bhushan=freescale.com@xxxxxxxxxxxxxxxx] On Behalf Of Nicolin Chen > Sent: Friday, November 08, 2013 4:20 PM > To: vinod.koul@xxxxxxxxx; dan.j.williams@xxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; > timur@xxxxxxxx; shawn.guo@xxxxxxxxxx; broonie@xxxxxxxxxx > Cc: mark.rutland@xxxxxxx; devicetree@xxxxxxxxxxxxxxx; alsa-devel@alsa- > project.org; pawel.moll@xxxxxxx; linux-doc@xxxxxxxxxxxxxxx; > swarren@xxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; rob.herring@xxxxxxxxxxx; > dmaengine@xxxxxxxxxxxxxxx; ijc+devicetree@xxxxxxxxxxxxxx; linuxppc- > dev@xxxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Subject: [PATCH v4 1/4] dma: imx-sdma: Add sdma firmware version 2 support > > On i.MX5/6 series, SDMA is using new version firmware to support SSI dual FIFO > feature and HDMI Audio (i.MX6Q/DL only). Thus add it. > > Signed-off-by: Nicolin Chen <b42378@xxxxxxxxxxxxx> > --- > drivers/dma/imx-sdma.c | 15 ++++++++++++++- > include/linux/platform_data/dma-imx-sdma.h | 5 +++++ > 2 files changed, 19 insertions(+), 1 deletion(-) > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index > fc43603..c7ece8d 100644 > --- a/drivers/dma/imx-sdma.c > +++ b/drivers/dma/imx-sdma.c > @@ -323,6 +323,7 @@ struct sdma_engine { > struct clk *clk_ipg; > struct clk *clk_ahb; > spinlock_t channel_0_lock; > + u32 script_number; > struct sdma_script_start_addrs *script_addrs; > const struct sdma_driver_data *drvdata; > }; > @@ -1238,6 +1239,7 @@ static void sdma_issue_pending(struct dma_chan *chan) } > > #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 > +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38 > > static void sdma_add_scripts(struct sdma_engine *sdma, > const struct sdma_script_start_addrs *addr) @@ -1246,7 +1248,7 @@ > static void sdma_add_scripts(struct sdma_engine *sdma, > s32 *saddr_arr = (u32 *)sdma->script_addrs; > int i; > > - for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) > + for (i = 0; i < sdma->script_number; i++) > if (addr_arr[i] > 0) > saddr_arr[i] = addr_arr[i]; > } > @@ -1272,6 +1274,17 @@ static void sdma_load_firmware(const struct firmware *fw, > void *context) > goto err_firmware; > if (header->ram_code_start + header->ram_code_size > fw->size) > goto err_firmware; > + switch (header->version_major) { > + case 1: > + sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; > + break; > + case 2: > + sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2; > + break; > + default: > + dev_err(sdma->dev, "unknown firmware version\n"); > + return; Why return and not "goto err_firmware" ? -Bharat > + } > > addr = (void *)header + header->script_addrs_start; > ram_code = (void *)header + header->ram_code_start; diff --git > a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma- > imx-sdma.h > index 3a39428..eabac4e 100644 > --- a/include/linux/platform_data/dma-imx-sdma.h > +++ b/include/linux/platform_data/dma-imx-sdma.h > @@ -43,6 +43,11 @@ struct sdma_script_start_addrs { > s32 dptc_dvfs_addr; > s32 utra_addr; > s32 ram_code_start_addr; > + /* End of v1 array */ > + s32 mcu_2_ssish_addr; > + s32 ssish_2_mcu_addr; > + s32 hdmi_dma_addr; > + /* End of v2 array */ > }; > > /** > -- > 1.8.4 > > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@xxxxxxxxxxxxxxxx > https://lists.ozlabs.org/listinfo/linuxppc-dev -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
