Re: [PATCH 1/4] perf/dwc_pcie: Fix registration issue in multi PCIe controller instances

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2024/7/31 12:23, Krishna chaitanya chundru wrote:
> When there are multiple of instances of PCIe controllers, registration
> to perf driver fails with this error.
> sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0'
> CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty
> Hardware name: Qualcomm SA8775P Ride (DT)
> Call trace:
>  dump_backtrace.part.8+0x98/0xf0
>  show_stack+0x14/0x1c
>  dump_stack_lvl+0x74/0x88
>  dump_stack+0x14/0x1c
>  sysfs_warn_dup+0x60/0x78
>  sysfs_create_dir_ns+0xe8/0x100
>  kobject_add_internal+0x94/0x224
>  kobject_add+0xa8/0x118
>  device_add+0x298/0x7b4
>  platform_device_add+0x1a0/0x228
>  platform_device_register_full+0x11c/0x148
>  dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu]
>  dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu]
>  do_one_initcall+0x58/0x1c0
>  do_init_module+0x58/0x208
>  load_module+0x1804/0x188c
>  __do_sys_init_module+0x18c/0x1f0
>  __arm64_sys_init_module+0x14/0x1c
>  invoke_syscall+0x40/0xf8
>  el0_svc_common.constprop.1+0x70/0xf4
>  do_el0_svc+0x18/0x20
>  el0_svc+0x28/0xb0
>  el0t_64_sync_handler+0x9c/0xc0
>  el0t_64_sync+0x160/0x164
> kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST,
> don't try to register things with the same name in the same directory.
> 
> This is because of having same bdf value for devices under two different
> controllers.
> 
> Update the logic to use sbdf which is a unique number in case of
> multi instance also.
> 
> Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")

Did you run into this on a QCOM platform with Patch 4/4 since there's
multiple PCIe domains?

> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  drivers/perf/dwc_pcie_pmu.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c
> index c5e328f23841..c115348b8d53 100644
> --- a/drivers/perf/dwc_pcie_pmu.c
> +++ b/drivers/perf/dwc_pcie_pmu.c
> @@ -556,10 +556,10 @@ static int dwc_pcie_register_dev(struct pci_dev *pdev)
>  {
>  	struct platform_device *plat_dev;
>  	struct dwc_pcie_dev_info *dev_info;
> -	u32 bdf;
> +	u32 sbdf;
>  
> -	bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
> -	plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
> +	sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn);
> +	plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", sbdf,
>  						 pdev, sizeof(*pdev));
>  
>  	if (IS_ERR(plat_dev))
> @@ -611,15 +611,15 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
>  	struct pci_dev *pdev = plat_dev->dev.platform_data;
>  	struct dwc_pcie_pmu *pcie_pmu;
>  	char *name;
> -	u32 bdf, val;
> +	u32 sbdf, val;
>  	u16 vsec;
>  	int ret;
>  
>  	vsec = pci_find_vsec_capability(pdev, pdev->vendor,
>  					DWC_PCIE_VSEC_RAS_DES_ID);
>  	pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
> -	bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
> -	name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf);
> +	sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn);

sbdf is also registerd as the id of the platform device in platform_device_register_data() above,
can we use it directly here without encoding it again?

Thanks.

> +	name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", sbdf);
>  	if (!name)
>  		return -ENOMEM;
>  
> @@ -650,7 +650,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
>  	ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state,
>  				       &pcie_pmu->cpuhp_node);
>  	if (ret) {
> -		pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf);
> +		pci_err(pdev, "Error %d registering hotplug @%x\n", ret, sbdf);
>  		return ret;
>  	}
>  
> @@ -663,7 +663,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
>  
>  	ret = perf_pmu_register(&pcie_pmu->pmu, name, -1);
>  	if (ret) {
> -		pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf);
> +		pci_err(pdev, "Error %d registering PMU @%x\n", ret, sbdf);
>  		return ret;
>  	}
>  	ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu,
> 




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux