[PATCH v3 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>

Add EDCS(Exynos Dual Cluster Support) for Samsung Exynos5410 SoC.
This enables all 8 cores, 4 x A7 and 4 x A15 run at the same time.

Signed-off-by: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@xxxxxxxxxxx>
---
 arch/arm/mach-exynos/Makefile |   2 +
 arch/arm/mach-exynos/edcs.c   | 278 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 280 insertions(+)
 create mode 100644 arch/arm/mach-exynos/edcs.c

diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 5369615..ba6efdb 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -34,3 +34,5 @@ AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
 obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
+
+obj-$(CONFIG_SOC_EXYNOS5410)		+= edcs.o
diff --git a/arch/arm/mach-exynos/edcs.c b/arch/arm/mach-exynos/edcs.c
new file mode 100644
index 0000000..980bfdd
--- /dev/null
+++ b/arch/arm/mach-exynos/edcs.c
@@ -0,0 +1,278 @@
+/*
+ * arch/arm/mach-exynos/edcs.c - exynos dual cluster power management support
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * EDCS(exynos dual cluster support) for Exynos5410 SoC.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <linux/arm-cci.h>
+#include <mach/regs-pmu.h>
+
+#define EDCS_CPUS_PER_CLUSTER	4
+#define EDCS_CLUSTERS		2
+
+/* Exynos5410 power management registers */
+#define EDCS_CORE_CONFIGURATION(_nr)	(S5P_ARM_CORE0_CONFIGURATION	\
+						+ ((_nr) * 0x80))
+#define EDCS_CORE_STATUS(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x4)
+#define EDCS_CORE_OPTION(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x8)
+
+#define REG_CPU_STATE_ADDR0		(S5P_VA_SYSRAM_NS + 0x28)
+#define REG_CPU_STATE_ADDR(_nr)		(REG_CPU_STATE_ADDR0 +	\
+						 (_nr) * EDCS_CPUS_PER_CLUSTER)
+
+#define SECONDARY_RESET		(1 << 1)
+#define REG_ENTRY_ADDR		(S5P_VA_SYSRAM_NS + 0x1c)
+
+static arch_spinlock_t edcs_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+static int edcs_use_count[EDCS_CPUS_PER_CLUSTER][EDCS_CLUSTERS];
+static int core_count[EDCS_CLUSTERS];
+
+static void exynos_core_power_control(unsigned int cpu, unsigned int cluster,
+				bool enable)
+{
+	unsigned int offset = cluster * MAX_CPUS_PER_CLUSTER + cpu;
+	int value = enable ? S5P_CORE_LOCAL_PWR_EN : 0;
+
+	if ((readl_relaxed(EDCS_CORE_STATUS(offset)) & 0x3) != value) {
+		wmb();
+		writel_relaxed(value, EDCS_CORE_CONFIGURATION(offset));
+	}
+}
+
+static void exynos_core_power_up(unsigned int cpu, unsigned int cluster)
+{
+	exynos_core_power_control(cpu, cluster, true);
+}
+
+static void exynos_core_power_down(unsigned int cpu, unsigned int cluster)
+{
+	exynos_core_power_control(cpu, cluster, false);
+}
+
+void set_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	writel_relaxed(mode, REG_CPU_STATE_ADDR(cpu));
+}
+
+static int exynos_power_up(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER || cluster >= EDCS_CLUSTERS);
+
+	local_irq_disable();
+	arch_spin_lock(&edcs_lock);
+
+	edcs_use_count[cpu][cluster]++;
+	if (edcs_use_count[cpu][cluster] == 1) {
+		++core_count[cluster];
+		set_boot_flag(cpu, SECONDARY_RESET);
+		exynos_core_power_up(cpu, cluster);
+	} else if (edcs_use_count[cpu][cluster] != 2) {
+		/*
+		 * The only possible values are:
+		 * 0 = CPU down
+		 * 1 = CPU (still) up
+		 * 2 = CPU requested to be up before it had a chance
+		 *     to actually make itself down.
+		 * Any other value is a bug.
+		 */
+		BUG();
+	}
+
+	arch_spin_unlock(&edcs_lock);
+	local_irq_enable();
+
+	return 0;
+}
+static void exynos_power_down(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man = false, skip_wfi = false;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: CORE%d on CLUSTER %d\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
+
+	__mcpm_cpu_going_down(cpu, cluster);
+
+	arch_spin_lock(&edcs_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+	edcs_use_count[cpu][cluster]--;
+	if (edcs_use_count[cpu][cluster] == 0) {
+		--core_count[cluster];
+		if (core_count[cluster] == 0)
+			last_man = true;
+	} else if (edcs_use_count[cpu][cluster] == 1) {
+		/*
+		 * A power_up request went ahead of us.
+		 * Even if we do not want to shut this CPU down,
+		 * the caller expects a certain state as if the WFI
+		 * was aborted.  So let's continue with cache cleaning.
+		 */
+		skip_wfi = true;
+	} else
+		BUG();
+
+	if (!skip_wfi)
+		gic_cpu_if_down();
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		arch_spin_unlock(&edcs_lock);
+
+		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+			/*
+			 * On the Cortex-A15 we need to disable
+			 * L2 prefetching before flushing the cache.
+			 */
+			asm volatile(
+			"mcr	p15, 1, %0, c15, c0, 3\n\t"
+			"isb\n\t"
+			"dsb"
+			: : "r" (0x400));
+		}
+
+		/*
+		 * We need to disable and flush the whole (L1 and L2) cache.
+		 * Let's do it in the safest possible way i.e. with
+		 * no memory access within the following sequence
+		 * including the stack.
+		 *
+		 * Note: fp is preserved to the stack explicitly prior doing
+		 * this since adding it to the clobber list is incompatible
+		 * with having CONFIG_FRAME_POINTER=y.
+		 */
+		asm volatile(
+		"str	fp, [sp, #-4]!\n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
+		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
+		"isb\n\t"
+		"bl	v7_flush_dcache_all\n\t"
+		"clrex\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
+		"isb\n\t"
+		"dsb\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+			"r9", "r10", "lr", "memory");
+
+		cci_disable_port_by_cpu(mpidr);
+
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+
+	} else {
+		arch_spin_unlock(&edcs_lock);
+		/*
+			* We need to disable and flush only the L1 cache.
+			* Let's do it in the safest possible way as above.
+		*/
+		asm volatile(
+		"str	fp, [sp, #-4]!\n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
+		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
+		"isb\n\t"
+		"bl	v7_flush_dcache_louis\n\t"
+		"clrex\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
+		"isb\n\t"
+		"dsb\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+		      "r9", "r10", "lr", "memory");
+
+	}
+	__mcpm_cpu_down(cpu, cluster);
+
+	if (!skip_wfi) {
+		exynos_core_power_down(cpu, cluster);
+		wfi();
+	}
+}
+
+static const struct mcpm_platform_ops exynos_power_ops = {
+	.power_up	= exynos_power_up,
+	.power_down	= exynos_power_down,
+};
+
+static void __init edcs_data_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
+	edcs_use_count[cpu][cluster] = 1;
+	++core_count[cluster];
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked edcs_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"b	cci_enable_port_for_self");
+}
+
+static int __init edcs_init(void)
+{
+	int ret;
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "samsung,exynos5410");
+	if (!node)
+		return -ENODEV;
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	/*
+	 * Future entries into the kernel can now go
+	 * through the cluster entry vectors.
+	 */
+	writel_relaxed(virt_to_phys(mcpm_entry_point), REG_ENTRY_ADDR);
+
+	edcs_data_init();
+	mcpm_smp_set_ops();
+
+	ret = mcpm_platform_register(&exynos_power_ops);
+	if (!ret) {
+		mcpm_sync_init(edcs_power_up_setup);
+		pr_info("EDCS power management initialized\n");
+	}
+	return ret;
+}
+
+early_initcall(edcs_init);
-- 
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux