Hi Thierry, The document binding patch of this patch series has been acked. And other patches have been acked before. Should I send a V6 patch series ? Thanks very much. -- > Subject: [RFCv2][PATCHv5 0/4] Add Freescale FTM PWM driver. > > Hello, > > This patch series is the Freescale FTM PWM implementation. And there are > 8 channels most supported by the FTM PWM. This implementation is only > compatible with device tree definition. > > This patch series is based on linux-next and has been tested on Vybrid > VF610 Tower board using device tree. > > > > Changes in RFCv2 of PATVHv5: > - Remove "fsl,pwm-counter-clk"(all the four patches are modified). > > Changes in v5: > - Remove active/idle pinctrl stuff. > > Changes in v4: > - Check for the result and return an error for devm_kzalloc(). > - Move pinmux setting from the SoC file to the board specific file. > - Revise the written mistake of 'ret |= FTMSC_CLKEXT;' --> 'reg |= > FTMSC_CLKEXT;'. > > > Changes in v3: > - Remove "availabe" field. > - Remove "fsl,pwm-avaliable-chs" property. > - ... > > Changes in v2: > - Remove PWM CPWM/EPWM feature and sysfs. > - Remove some redundant code. > - Revise some code for more readable. > - Remove "fsl,pwm-clk-ps", "fsl,pwm-number", "fsl,pwm-channels",etc. > - Add "fsl,pwm-avaliable-chs", "fsl,pwm-counter-clk", etc. > - Support 8 channels default in dtsi file. > - Add counter clock source selection. > - Rename some function name, macro name, etc. > - Use PWM's and OF's existing function interfaces. > - Split clk_unprepare_enable to clk_unprepare and clk_enable,etc. > - ... > > Added in v1: > - Add Freescale FTM PWM driver support. > - Add Freescale FTM PWM node for VF610. > - Enable Enables FTM PWM device for Vybrid VF610 TOWER. > - Add device tree bindings for Freescale. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
