Hi Alan,
On Wed, Nov 06, 2013 at 04:49:42PM -0600, Alan Tull wrote:
> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
> new file mode 100644
> index 0000000..7957dfd
> --- /dev/null
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -0,0 +1,458 @@
> +/*
> + * Copyright (c) 2011 Jamie Iles
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * All enquiries to support@xxxxxxxxxxxx
> + */
> +#include <linux/basic_mmio_gpio.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +
> +#define GPIO_SWPORTA_DR 0x00
> +#define GPIO_SWPORTA_DDR 0x04
> +#define GPIO_SWPORTB_DR 0x0c
> +#define GPIO_SWPORTB_DDR 0x10
> +#define GPIO_SWPORTC_DR 0x18
> +#define GPIO_SWPORTC_DDR 0x1c
> +#define GPIO_SWPORTD_DR 0x24
> +#define GPIO_SWPORTD_DDR 0x28
> +#define GPIO_INTEN 0x30
> +#define GPIO_INTMASK 0x34
> +#define GPIO_INTTYPE_LEVEL 0x38
> +#define GPIO_INT_POLARITY 0x3c
> +#define GPIO_INTSTATUS 0x40
> +#define GPIO_PORTA_EOI 0x4c
> +#define GPIO_EXT_PORTA 0x50
> +#define GPIO_EXT_PORTB 0x54
> +#define GPIO_EXT_PORTC 0x58
> +#define GPIO_EXT_PORTD 0x5c
> +
> +struct dwapb_gpio;
> +
> +struct dwapb_gpio_port {
> + struct bgpio_chip bgc;
> + bool is_registered;
> + struct dwapb_gpio *gpio;
> +};
> +
> +struct dwapb_gpio {
> + struct device *dev;
> + void __iomem *regs;
> + struct dwapb_gpio_port *ports;
> + unsigned int nr_ports;
> + struct irq_domain *domain;
> + int hwirq;
I'm not sure I fully understand what hwirq is in this context - is it
the IRQ line from the Synopsys block to the system interrupt controller?
If so I don't think this covers all configurations - the Picochip
devices for instance have each GPIO in port A as an individual IRQ going
to the VIC.
It looks here like hwirq is used for all of the interrupt registers so
only one GPIO interrupt is supported?
> +static struct platform_driver dwapb_gpio_driver = {
> + .driver = {
> + .name = "gpio-dwapb",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(dwapb_of_match),
> + },
> + .probe = dwapb_gpio_probe,
> + .remove = dwapb_gpio_remove,
> +};
> +
> +static int __init dwapb_gpio_init(void)
> +{
> + return platform_driver_register(&dwapb_gpio_driver);
> +}
> +postcore_initcall(dwapb_gpio_init);
> +
> +static void __exit dwapb_gpio_exit(void)
> +{
> + platform_driver_unregister(&dwapb_gpio_driver);
> +}
> +module_exit(dwapb_gpio_exit);
We can replace the registration and unregistration with
module_platform_driver() now.
Jamie
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
