On Tue, Jul 30, 2024 at 09:39:05AM +0530, Parthiban Veerasooran wrote: > The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x > MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4 > MAC integration provides the low pin count standard SPI interface to any > microcontroller therefore providing Ethernet functionality without > requiring MAC integration within the microcontroller. The LAN8650/1 > operates as an SPI client supporting SCLK clock rates up to a maximum of > 25 MHz. This SPI interface supports the transfer of both data (Ethernet > frames) and control (register access). > > By default, the chunk data payload is 64 bytes in size. The Ethernet > Media Access Controller (MAC) module implements a 10 Mbps half duplex > Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S > physical layer transceiver integrated is into the LAN8650/1. The PHY and > MAC are connected via an internal Media Independent Interface (MII). I see there are some fixes needed for Multicast, but otherwise this looks O.K. Please send a new version with the fixes, and then i think we are ready for this to be merged. Andrew
