With the auto setting, the PHY's clock and power can be recovered correctly from low power mode, it is ganranteed by IC logic. Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> --- drivers/usb/phy/phy-mxs-usb.c | 20 +++++++++++++++++--- 1 files changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 8b9d80c..472fe36 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -31,6 +31,11 @@ #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) +#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26) +#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25) +#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20) +#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19) +#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18) #define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) @@ -96,9 +101,18 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); - /* enable FS/LS device */ - writel(BM_USBPHY_CTRL_ENUTMILEVEL2 | - BM_USBPHY_CTRL_ENUTMILEVEL3, + /* + * USB PHY Ctrl Setting + * - Auto clock/power on + * - Enable full/low speed support + */ + writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS | + BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE | + BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD | + BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE | + BM_USBPHY_CTRL_ENAUTO_PWRON_PLL | + BM_USBPHY_CTRL_ENUTMILEVEL2 | + BM_USBPHY_CTRL_ENUTMILEVEL3, base + HW_USBPHY_CTRL_SET); return 0; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
