On Fri, 26 Jul 2024 18:09:07 +0530, Parthiban Veerasooran wrote: > The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet > PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller > (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible > with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver > integrated into the LAN8650/1. The communication between the Host and the > MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial > Interface (TC6). > > Reviewed-by: Conor Dooley<conor.dooley@xxxxxxxxxxxxx> > Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx> > --- > .../bindings/net/microchip,lan8650.yaml | 80 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/microchip,lan8650.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/microchip,lan8650.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/net/microchip,lan865x.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/microchip,lan8650.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240726123907.566348-15-Parthiban.Veerasooran@xxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
