Re: [PATCH V2 1/7] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Oct 30, 2013, at 9:57 AM, Sricharan R wrote:

> In some socs the gic can be preceded by a crossbar IP which
> routes the peripheral interrupts to the gic inputs. The peripheral
> interrupts are associated with a fixed crossbar input line and the
> crossbar routes that to one of the free gic input line.
> 
> The DT entries for peripherals provides the fixed crossbar input line
> as its interrupt number and the mapping code should associate this with
> a free gic input line. This patch adds the support inside the gic irqchip
> to handle such routable irqs. The routable irqs are registered in a linear
> domain. The registered routable domain's callback should be implemented
> to get a free irq and to configure the IP to route it.
> 
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Rajendra Nayak <rnayak@xxxxxx>
> Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxx>
> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
> Signed-off-by: Sricharan R <r.sricharan@xxxxxx>
> ---
> [V2] Added default routable-irqs functions to avoid
>      unnessecary if checks as per Thomas Gleixner comments
>      and renamed routable-irq binding as per
>      Kumar Gala <galak@xxxxxxxxxxxxxx> comments.
> 
> Documentation/devicetree/bindings/arm/gic.txt |    6 ++
> drivers/irqchip/irq-gic.c                     |   83 ++++++++++++++++++++++---
> include/linux/irqchip/arm-gic.h               |    8 ++-
> 3 files changed, 87 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
> index 3dfb0c0..5357745 100644
> --- a/Documentation/devicetree/bindings/arm/gic.txt
> +++ b/Documentation/devicetree/bindings/arm/gic.txt
> @@ -49,6 +49,11 @@ Optional
>   regions, used when the GIC doesn't have banked registers. The offset is
>   cpu-offset * cpu-nr.
> 
> +- arm,routable-irqs : Total number of gic irq inputs which are not directly
> +		  connected from the peripherals, but are routed dynamically
> +		  by a crossbar/multiplexer preceding the GIC. The GIC irq
> +		  input line is assigned dynamically when the corresponding
> +		  peripheral's crossbar line is mapped.
> Example:
> 
> 	intc: interrupt-controller@fff11000 {
> @@ -56,6 +61,7 @@ Example:
> 		#interrupt-cells = <3>;
> 		#address-cells = <1>;
> 		interrupt-controller;
> +		arm,routable-irqs = <160>;
> 		reg = <0xfff11000 0x1000>,
> 		      <0xfff10100 0x100>;
> 	};

DT Binding portion:

Acked-by: Kumar Gala <galak@xxxxxxxxxxxxxx>

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux