Re: [PATCH v6 6/7] iio: adc: Add support for AD4000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2024-06-29 at 16:06 -0300, Marcelo Schmitt wrote:
> Add support for AD4000 series of low noise, low power, high speed,
> successive approximation register (SAR) ADCs.
> 
> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
> ---

Hi Marcelo,

LGTM. Only one thing that needs to be addressed. With that,

Reviewed-by: Nuno Sa <nuno.sa@xxxxxxxxxx>

>  MAINTAINERS              |   1 +
>  drivers/iio/adc/Kconfig  |  12 +
>  drivers/iio/adc/Makefile |   1 +
>  drivers/iio/adc/ad4000.c | 708 +++++++++++++++++++++++++++++++++++++++
>  4 files changed, 722 insertions(+)
>  create mode 100644 drivers/iio/adc/ad4000.c
> 

...

> 
> +	st->gain_milli = 1000;
> +	if (chip->has_hardware_gain &&
> +	    device_property_present(dev, "adi,gain-milli")) {
> +		ret = device_property_read_u16(dev, "adi,gain-milli",
> +					       &st->gain_milli);
> +		if (ret)
> +			return dev_err_probe(dev, ret,
> +					     "Failed to read gain
> property\n");
> +	}

The above is odd. Why not reading directly device_property_read_u16()? Skip the
call to device_property_present(). 

But most importantly, you're not doing any validation on gain_milli which is an
enum (by looking at the bindings). So in theory even 0 would be accepted which
would lead to a divide by 0 later on. I would do:

if (chip->has_hardware_gain) {
	ret = device_property_read_u16(...)
	if (!ret) {
		/* validate here for a proper value /*
	}
}

You can also check for ret < 0 and -EINVAL to detect an invalid devicetree
parameter instead of completely ignoring return codes (but for non mandatory
properties one typically does not care much - up to you)

- Nuno Sá






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux