Re: [PATCH v4 4/5] firmware: imx: add driver for NXP EdgeLock Enclave

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/5/24 6:52 AM, Pankaj Gupta wrote:
> diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
> index 183613f82a11..56bdca9bd917 100644
> --- a/drivers/firmware/imx/Kconfig
> +++ b/drivers/firmware/imx/Kconfig
> @@ -22,3 +22,15 @@ config IMX_SCU
>  
>  	  This driver manages the IPC interface between host CPU and the
>  	  SCU firmware running on M4.
> +
> +config IMX_SEC_ENCLAVE
> +	tristate "i.MX Embedded Secure Enclave - EdgeLock Enclave Firmware driver."
> +	depends on IMX_MBOX && ARCH_MXC && ARM64
> +	default m if ARCH_MXC
> +
> +	help
> +	  It is possible to use APIs exposed by the iMX Secure Enclave HW IP called:
> +          - EdgeLock Enclave Firmware (for i.MX8ULP, i.MX93),
> +          like base, HSM, V2X & SHE using the SAB protocol via the shared Messaging
> +          Unit. This driver exposes these interfaces via a set of file descriptors
> +          allowing to configure shared memory, send and receive messages.

The 4 lines above should be indented with one tab + 2 spaces instead of _many_ spaces.

-- 
~Randy




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux