Add support for MPS VR controller mp2891. This driver exposes
telemetry and limit value readings and writtings.
Signed-off-by: Noah Wang <noahwang.wang@xxxxxxxxxxx>
---
v4 -> v5:
1. remove useless code in mp2891_identify()
v3 -> v4:
1. add mp2891 to Makefile, Kconfig and MAINTAINERS file
in alpha order
2. sort include files in alpha order
3. fix some issue in annotation
4. remove info variable in mp2891_probe()
5. add const attribute to mp2891_info variable
v2 -> v3:
1. change PSC_VOLTAGE_IN, PSC_CURRENT_IN, PSC_TEMPERATURE,
and PSC_POWER format from linear to direct
2. add limit register writtings.
3. fix some coding style issues
V1 -> V2:
1. add limit register readings
2. add status register readings
3. change PSC_CURRENT_OUT format from linear to direct
4. add more detailed explanation for special processing
5. remove useless code
6. move identify vout_scale, iout_scale function to
identify() callback
7. update MP2891 datasheet
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/mp2891.rst | 179 ++++++++++
MAINTAINERS | 7 +
drivers/hwmon/pmbus/Kconfig | 9 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/mp2891.c | 600 +++++++++++++++++++++++++++++++++
6 files changed, 797 insertions(+)
create mode 100644 Documentation/hwmon/mp2891.rst
create mode 100644 drivers/hwmon/pmbus/mp2891.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 03d313af469a..e8413ca7dd96 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -165,6 +165,7 @@ Hardware Monitoring Kernel Drivers
mlxreg-fan
mp2856
mp2888
+ mp2891
mp2975
mp5023
mp5990
diff --git a/Documentation/hwmon/mp2891.rst b/Documentation/hwmon/mp2891.rst
new file mode 100644
index 000000000000..55944d1b5457
--- /dev/null
+++ b/Documentation/hwmon/mp2891.rst
@@ -0,0 +1,179 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp2891
+====================
+
+Supported chips:
+
+ * MPS mp2891
+
+ Prefix: 'mp2891'
+
+ * Datasheet
+
+ Publicly available at the MPS website : https://www.monolithicpower.com/en/mp2891.html
+
+Author:
+
+ Noah Wang <noahwang.wang@xxxxxxxxxxx>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP2891 Multi-phase Digital VR Controller.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct and linear format for reading input voltage,
+output voltage, input current, output current, input power, output
+power, and temperature.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+**in1_lcrit**
+
+**in1_lcrit_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_crit**
+
+**in2_crit_alarm**
+
+**in2_lcrit**
+
+**in2_lcrit_alarm**
+
+**in2_min**
+
+**in2_min_alarm**
+
+**in3_input**
+
+**in3_label**
+
+**in3_crit**
+
+**in3_crit_alarm**
+
+**in3_lcrit**
+
+**in3_lcrit_alarm**
+
+**in3_min**
+
+**in3_min_alarm**
+
+The driver provides the following attributes for input current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr2_input**
+
+**curr2_label**
+
+**curr2_max**
+
+**curr2_max_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr3_input**
+
+**curr3_label**
+
+**curr3_crit**
+
+**curr3_crit_alarm**
+
+**curr3_max**
+
+**curr3_max_alarm**
+
+**curr4_input**
+
+**curr4_label**
+
+**curr4_crit**
+
+**curr4_crit_alarm**
+
+**curr4_max**
+
+**curr4_max_alarm**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+**power1_max**
+
+**power1_alarm**
+
+**power2_input**
+
+**power2_label**
+
+**power2_max**
+
+**power2_alarm**
+
+The driver provides the following attributes for output power:
+
+**power3_input**
+
+**power3_label**
+
+**power4_input**
+
+**power4_label**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp2_input**
+
+**temp2_crit**
+
+**temp2_crit_alarm**
+
+**temp2_max**
+
+**temp2_max_alarm**
diff --git a/MAINTAINERS b/MAINTAINERS
index 2ca8f35dfe03..8aaf4108d24e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15255,6 +15255,13 @@ S: Maintained
F: Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
F: drivers/video/backlight/mp3309c.c
+MPS MP2891 DRIVER
+M: Noah Wang <noahwang.wang@xxxxxxxxxxx>
+L: linux-hwmon@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/hwmon/mp2891.rst
+F: drivers/hwmon/pmbus/mp2891.c
+
MR800 AVERMEDIA USB FM RADIO DRIVER
M: Alexey Klimov <klimov.linux@xxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 08e82c457356..66a3bad95ab3 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -337,6 +337,15 @@ config SENSORS_MP2888
This driver can also be built as a module. If so, the module will
be called mp2888.
+config SENSORS_MP2891
+ tristate "MPS MP2891"
+ help
+ If you say yes here you get hardware monitoring support for MPS
+ MP2891 Dual Loop Digital Multi-Phase Controller.
+
+ This driver can also be built as a module. If so, the module will
+ be called mp2891.
+
config SENSORS_MP2975
tristate "MPS MP2975"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 2279b3327bbf..84e2ff71f7d6 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
obj-$(CONFIG_SENSORS_MP2856) += mp2856.o
obj-$(CONFIG_SENSORS_MP2888) += mp2888.o
+obj-$(CONFIG_SENSORS_MP2891) += mp2891.o
obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
obj-$(CONFIG_SENSORS_MP5990) += mp5990.o
diff --git a/drivers/hwmon/pmbus/mp2891.c b/drivers/hwmon/pmbus/mp2891.c
new file mode 100644
index 000000000000..bb28b15a9103
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp2891.c
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2891)
+ */
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+/*
+ * Vender specific registers, the register MFR_SVI3_IOUT_PRT(0x65),
+ * MFR_VOUT_LOOP_CTRL(0xBD), READ_PIN_EST(0x94)and READ_IIN_EST(0x95)
+ * redefine the standard PMBUS register. The MFR_SVI3_IOUT_PRT(0x65)
+ * is used to identify the iout scale and the MFR_VOUT_LOOP_CTRL(0xBD)
+ * is used to identify the vout scale. The READ_PIN_EST(0x94) is used
+ * to read input power per rail. The MP2891 does not have standard
+ * READ_IIN register(0x89), the iin telemetry can be obtained through
+ * the vendor redefined register READ_IIN_EST(0x95).
+ */
+#define MFR_VOUT_LOOP_CTRL 0xBD
+#define READ_PIN_EST 0x94
+#define READ_IIN_EST 0x95
+#define MFR_SVI3_IOUT_PRT 0x65
+
+#define MP2891_TEMP_LIMIT_OFFSET 40
+#define MP2891_PIN_LIMIT_UINT 2
+#define MP2891_IOUT_LIMIT_UINT 8
+#define MP2891_IOUT_SCALE_DIV 32
+#define MP2891_VOUT_SCALE_DIV 100
+#define MP2891_OVUV_DELTA_SCALE 50
+#define MP2891_OV_LIMIT_SCALE 20
+#define MP2891_UV_LIMIT_SCALE 5
+
+#define MP2891_PAGE_NUM 2
+
+#define MP2891_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP | \
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | \
+ PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_VOUT | \
+ PMBUS_HAVE_STATUS_IOUT | \
+ PMBUS_HAVE_STATUS_INPUT | \
+ PMBUS_HAVE_STATUS_TEMP)
+
+#define MP2891_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT | \
+ PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | \
+ PMBUS_HAVE_STATUS_VOUT | \
+ PMBUS_HAVE_STATUS_IOUT | \
+ PMBUS_HAVE_STATUS_INPUT | \
+ PMBUS_HAVE_STATUS_TEMP)
+
+struct mp2891_data {
+ struct pmbus_driver_info info;
+ int vout_scale[MP2891_PAGE_NUM];
+ int iout_scale[MP2891_PAGE_NUM];
+};
+
+#define to_mp2891_data(x) container_of(x, struct mp2891_data, info)
+
+/* Converts a LINEAR11 value to DIRECT format */
+static u16 mp2891_reg2data_linear11(u16 word)
+{
+ s16 exponent;
+ s32 mantissa;
+ s64 val;
+
+ exponent = ((s16)word) >> 11;
+ mantissa = ((s16)((word & 0x7ff) << 5)) >> 5;
+ val = mantissa;
+
+ if (exponent >= 0)
+ val <<= exponent;
+ else
+ val >>= -exponent;
+
+ return val;
+}
+
+static int
+mp2891_identify_vout_scale(struct i2c_client *client, struct pmbus_driver_info *info,
+ int page)
+{
+ struct mp2891_data *data = to_mp2891_data(info);
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_word_data(client, MFR_VOUT_LOOP_CTRL);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The output voltage is equal to the READ_VOUT(0x8B) register value multiplied
+ * by vout_scale.
+ * Obtain vout scale from the register MFR_VOUT_LOOP_CTRL, bits 15-14,bit 13.
+ * If MFR_VOUT_LOOP_CTRL[13] = 1, the vout scale is below:
+ * 2.5mV/LSB
+ * If MFR_VOUT_LOOP_CTRL[13] = 0, the vout scale is decided by
+ * MFR_VOUT_LOOP_CTRL[15:14]:
+ * 00b - 6.25mV/LSB, 01b - 5mV/LSB, 10b - 2mV/LSB, 11b - 1mV
+ */
+ if (ret & GENMASK(13, 13)) {
+ data->vout_scale[page] = 250;
+ } else {
+ ret = FIELD_GET(GENMASK(15, 14), ret);
+ if (ret == 0)
+ data->vout_scale[page] = 625;
+ else if (ret == 1)
+ data->vout_scale[page] = 500;
+ else if (ret == 2)
+ data->vout_scale[page] = 200;
+ else
+ data->vout_scale[page] = 100;
+ }
+
+ return 0;
+}
+
+static int
+mp2891_identify_iout_scale(struct i2c_client *client, struct pmbus_driver_info *info,
+ int page)
+{
+ struct mp2891_data *data = to_mp2891_data(info);
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_word_data(client, MFR_SVI3_IOUT_PRT);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The output current is equal to the READ_IOUT(0x8C) register value
+ * multiplied by iout_scale.
+ * Obtain iout_scale from the register MFR_SVI3_IOUT_PRT[2:0].
+ * The value is selected as below:
+ * 000b - 1A/LSB, 001b - (1/32)A/LSB, 010b - (1/16)A/LSB,
+ * 011b - (1/8)A/LSB, 100b - (1/4)A/LSB, 101b - (1/2)A/LSB
+ * 110b - 1A/LSB, 111b - 2A/LSB
+ */
+ switch (ret & GENMASK(2, 0)) {
+ case 0:
+ case 6:
+ data->iout_scale[page] = 32;
+ break;
+ case 1:
+ data->iout_scale[page] = 1;
+ break;
+ case 2:
+ data->iout_scale[page] = 2;
+ break;
+ case 3:
+ data->iout_scale[page] = 4;
+ break;
+ case 4:
+ data->iout_scale[page] = 8;
+ break;
+ case 5:
+ data->iout_scale[page] = 16;
+ break;
+ default:
+ data->iout_scale[page] = 64;
+ break;
+ }
+
+ return 0;
+}
+
+static int mp2891_identify(struct i2c_client *client, struct pmbus_driver_info *info)
+{
+ int ret;
+
+ /* Identify vout scale for rail 1. */
+ ret = mp2891_identify_vout_scale(client, info, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Identify vout scale for rail 2. */
+ ret = mp2891_identify_vout_scale(client, info, 1);
+ if (ret < 0)
+ return ret;
+
+ /* Identify iout scale for rail 1. */
+ ret = mp2891_identify_iout_scale(client, info, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Identify iout scale for rail 2. */
+ return mp2891_identify_iout_scale(client, info, 1);
+}
+
+static int mp2891_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VOUT_MODE:
+ /*
+ * The MP2891 does not follow standard PMBus protocol completely, the
+ * PMBUS_VOUT_MODE(0x20) in MP2891 is reserved and 0x00 is always
+ * returned when the register is read. But the calculation of vout in
+ * this driver is based on direct format. As a result, the format of
+ * vout is enforced to direct.
+ */
+ ret = PB_VOUT_MODE_DIRECT;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+
+ return ret;
+}
+
+static int mp2891_read_word_data(struct i2c_client *client, int page,
+ int phase, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct mp2891_data *data = to_mp2891_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_READ_VIN:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = ret & GENMASK(9, 0);
+ break;
+ case PMBUS_READ_IIN:
+ /*
+ * The MP2891 does not have standard PMBUS_READ_IIN register(0x89),
+ * the iin telemetry can be obtained through the vender redefined
+ * register READ_IIN_EST(0x95). The MP2891 PMBUS_READ_IIN register
+ * is linear11 format, But the pout scale is set to 1A/Lsb(using
+ * r/m/b scale). As a result, the iin read from MP2891 should be
+ * calculated to A, then return the result to pmbus core.
+ */
+ ret = pmbus_read_word_data(client, page, phase, READ_IIN_EST);
+ if (ret < 0)
+ return ret;
+
+ ret = mp2891_reg2data_linear11(ret);
+ break;
+ case PMBUS_READ_PIN:
+ /*
+ * The MP2891 has standard PMBUS_READ_PIN register(0x97), but this
+ * is not used to read the input power per rail. The input power
+ * per rail is read through the vender redefined register
+ * READ_PIN_EST(0x94). The MP2891 PMBUS_READ_PIN register is linear11
+ * format, But the pout scale is set to 1W/Lsb(using r/m/b scale).
+ * As a result, the pin read from MP2891 should be calculated to W,
+ * then return the result to pmbus core.
+ */
+ ret = pmbus_read_word_data(client, page, phase, READ_PIN_EST);
+ if (ret < 0)
+ return ret;
+
+ ret = mp2891_reg2data_linear11(ret);
+ break;
+ case PMBUS_READ_POUT:
+ /*
+ * The MP2891 PMBUS_READ_POUT register is linear11 format, and the
+ * exponent is not a constant value. But the pout scale is set to
+ * 1W/Lsb(using r/m/b scale). As a result, the pout read from MP2891
+ * should be calculated to W, then return the result to pmbus core.
+ */
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = mp2891_reg2data_linear11(ret);
+ break;
+ case PMBUS_READ_VOUT:
+ case PMBUS_VOUT_UV_WARN_LIMIT:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = DIV_ROUND_CLOSEST(ret * data->vout_scale[page], MP2891_VOUT_SCALE_DIV);
+ break;
+ case PMBUS_READ_IOUT:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = DIV_ROUND_CLOSEST((ret & GENMASK(10, 0)) * data->iout_scale[page],
+ MP2891_IOUT_SCALE_DIV);
+ break;
+ case PMBUS_OT_FAULT_LIMIT:
+ case PMBUS_OT_WARN_LIMIT:
+ /*
+ * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT
+ * is 1°C/LSB and they have 40°C offset.
+ */
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = (ret & GENMASK(7, 0)) - MP2891_TEMP_LIMIT_OFFSET;
+ break;
+ case PMBUS_VIN_OV_FAULT_LIMIT:
+ /*
+ * The MP2891 PMBUS_VIN_OV_FAULT_LIMIT scale is 125mV/Lsb.
+ * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale).
+ * As a result, the limit value should be multiplied by 4.
+ */
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = (ret & GENMASK(7, 0)) * 4;
+ break;
+ case PMBUS_VOUT_UV_FAULT_LIMIT:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ if (FIELD_GET(GENMASK(11, 8), ret))
+ ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE -
+ (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE;
+ else
+ ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE;
+
+ ret = ret < 0 ? 0 : ret;
+ break;
+ case PMBUS_VOUT_OV_FAULT_LIMIT:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ if (FIELD_GET(GENMASK(11, 8), ret))
+ ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE +
+ (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE;
+ else
+ ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE;
+ break;
+ case PMBUS_IOUT_OC_WARN_LIMIT:
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * data->iout_scale[page] *
+ MP2891_IOUT_LIMIT_UINT, MP2891_IOUT_SCALE_DIV);
+ break;
+ case PMBUS_IIN_OC_WARN_LIMIT:
+ /*
+ * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale
+ * is set to 1A/Lsb(using r/m/b scale), so the word data should be
+ * divided by 2.
+ */
+ ret = pmbus_read_word_data(client, 0, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)), 2);
+ break;
+ case PMBUS_PIN_OP_WARN_LIMIT:
+ /*
+ * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale
+ * is set to 1W/Lsb(using r/m/b scale), so the word data should be
+ * multiplied by 2.
+ */
+ ret = pmbus_read_word_data(client, 0, phase, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = (ret & GENMASK(9, 0)) * MP2891_PIN_LIMIT_UINT;
+ break;
+ case PMBUS_READ_TEMPERATURE_1:
+ case PMBUS_VIN_UV_FAULT_LIMIT:
+ case PMBUS_VIN_UV_WARN_LIMIT:
+ ret = -ENODATA;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int mp2891_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct mp2891_data *data = to_mp2891_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VOUT_UV_WARN_LIMIT:
+ ret = pmbus_write_word_data(client, page, reg,
+ DIV_ROUND_CLOSEST(word * MP2891_VOUT_SCALE_DIV,
+ data->vout_scale[page]));
+ break;
+ case PMBUS_VOUT_UV_FAULT_LIMIT:
+ /*
+ * The PMBUS_VOUT_UV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15
+ * should not be changed.
+ */
+ ret = pmbus_read_word_data(client, page, 0xff, reg);
+ if (ret < 0)
+ return ret;
+
+ if (FIELD_GET(GENMASK(11, 8), ret))
+ ret = pmbus_write_word_data(client, page, reg,
+ (ret & ~GENMASK(7, 0)) |
+ FIELD_PREP(GENMASK(7, 0),
+ DIV_ROUND_CLOSEST(word +
+ (FIELD_GET(GENMASK(11, 8), ret) + 1) *
+ MP2891_OVUV_DELTA_SCALE,
+ MP2891_UV_LIMIT_SCALE)));
+ else
+ ret = pmbus_write_word_data(client, page, reg,
+ (ret & ~GENMASK(7, 0)) |
+ FIELD_PREP(GENMASK(7, 0),
+ DIV_ROUND_CLOSEST(word,
+ MP2891_UV_LIMIT_SCALE)));
+ break;
+ case PMBUS_VOUT_OV_FAULT_LIMIT:
+ /*
+ * The PMBUS_VOUT_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15
+ * should not be changed.
+ */
+ ret = pmbus_read_word_data(client, page, 0xff, reg);
+ if (ret < 0)
+ return ret;
+
+ if (FIELD_GET(GENMASK(11, 8), ret))
+ ret = pmbus_write_word_data(client, page, reg,
+ (ret & ~GENMASK(7, 0)) |
+ FIELD_PREP(GENMASK(7, 0),
+ DIV_ROUND_CLOSEST(word -
+ (FIELD_GET(GENMASK(11, 8), ret) + 1) *
+ MP2891_OVUV_DELTA_SCALE,
+ MP2891_OV_LIMIT_SCALE)));
+ else
+ ret = pmbus_write_word_data(client, page, reg,
+ (ret & ~GENMASK(7, 0)) |
+ FIELD_PREP(GENMASK(7, 0),
+ DIV_ROUND_CLOSEST(word,
+ MP2891_OV_LIMIT_SCALE)));
+ break;
+ case PMBUS_VIN_OV_FAULT_LIMIT:
+ /*
+ * The PMBUS_VIN_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15
+ * should not be changed. The scale of PMBUS_VIN_OV_FAULT_LIMIT is 125mV/Lsb,
+ * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale), so the word data
+ * should be divided by 4.
+ */
+ ret = pmbus_read_word_data(client, page, 0xff, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = pmbus_write_word_data(client, page, reg,
+ (ret & ~GENMASK(7, 0)) |
+ FIELD_PREP(GENMASK(7, 0),
+ DIV_ROUND_CLOSEST(word, 4)));
+ break;
+ case PMBUS_OT_FAULT_LIMIT:
+ case PMBUS_OT_WARN_LIMIT:
+ /*
+ * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT
+ * have 40°C offset. The bit0-bit7 is the limit value, and bit8-bit15
+ * should not be changed.
+ */
+ ret = pmbus_read_word_data(client, page, 0xff, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = pmbus_write_word_data(client, page, reg,
+ (ret & ~GENMASK(7, 0)) |
+ FIELD_PREP(GENMASK(7, 0), word + MP2891_TEMP_LIMIT_OFFSET));
+ break;
+ case PMBUS_IOUT_OC_WARN_LIMIT:
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ ret = pmbus_write_word_data(client, page, reg,
+ DIV_ROUND_CLOSEST(word * MP2891_IOUT_SCALE_DIV,
+ MP2891_IOUT_LIMIT_UINT *
+ data->iout_scale[page]));
+ break;
+ case PMBUS_IIN_OC_WARN_LIMIT:
+ /*
+ * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale
+ * is set to 1A/Lsb(using r/m/b scale), so the word data should be
+ * multiplied by 2.
+ */
+ ret = pmbus_write_word_data(client, page, reg, word * 2);
+ break;
+ case PMBUS_PIN_OP_WARN_LIMIT:
+ /*
+ * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale
+ * is set to 1W/Lsb(using r/m/b scale), so the word data should be
+ * divided by 2.
+ */
+ ret = pmbus_write_word_data(client, page, reg,
+ DIV_ROUND_CLOSEST(word, MP2891_PIN_LIMIT_UINT));
+ break;
+ case PMBUS_VIN_UV_FAULT_LIMIT:
+ case PMBUS_VIN_UV_WARN_LIMIT:
+ ret = -ENODATA;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct pmbus_driver_info mp2891_info = {
+ .pages = MP2891_PAGE_NUM,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_CURRENT_IN] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .format[PSC_POWER] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+
+ /* set vin scale 31.25mV/Lsb */
+ .m[PSC_VOLTAGE_IN] = 32,
+ .R[PSC_VOLTAGE_IN] = 0,
+ .b[PSC_VOLTAGE_IN] = 0,
+
+ /* set temp scale 1000m°C/Lsb */
+ .m[PSC_TEMPERATURE] = 1,
+ .R[PSC_TEMPERATURE] = 0,
+ .b[PSC_TEMPERATURE] = 0,
+
+ .m[PSC_CURRENT_IN] = 1,
+ .R[PSC_CURRENT_IN] = 0,
+ .b[PSC_CURRENT_IN] = 0,
+
+ .m[PSC_CURRENT_OUT] = 1,
+ .R[PSC_CURRENT_OUT] = 0,
+ .b[PSC_CURRENT_OUT] = 0,
+
+ .m[PSC_POWER] = 1,
+ .R[PSC_POWER] = 0,
+ .b[PSC_POWER] = 0,
+
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .b[PSC_VOLTAGE_OUT] = 0,
+
+ .func[0] = MP2891_RAIL1_FUNC,
+ .func[1] = MP2891_RAIL2_FUNC,
+ .read_word_data = mp2891_read_word_data,
+ .write_word_data = mp2891_write_word_data,
+ .read_byte_data = mp2891_read_byte_data,
+ .identify = mp2891_identify,
+};
+
+static int mp2891_probe(struct i2c_client *client)
+{
+ struct mp2891_data *data;
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ memcpy(&data->info, &mp2891_info, sizeof(mp2891_info));
+
+ return pmbus_do_probe(client, &data->info);
+}
+
+static const struct i2c_device_id mp2891_id[] = {
+ {"mp2891", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, mp2891_id);
+
+static const struct of_device_id __maybe_unused mp2891_of_match[] = {
+ {.compatible = "mps,mp2891"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, mp2891_of_match);
+
+static struct i2c_driver mp2891_driver = {
+ .driver = {
+ .name = "mp2891",
+ .of_match_table = mp2891_of_match,
+ },
+ .probe = mp2891_probe,
+ .id_table = mp2891_id,
+};
+
+module_i2c_driver(mp2891_driver);
+
+MODULE_AUTHOR("Noah Wang <noahwang.wang@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for MPS MP2891");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.25.1
