This patch series adds 10G-QXGMII mode for PHY driver. The patch series is split from the QCA8084 PHY driver patch series below. https://lore.kernel.org/all/20231215074005.26976-1-quic_luoj@xxxxxxxxxxx/ Per Andrew Lunn’s advice, submitting this patch series for acceptance as they already include the necessary 'Reviewed-by:' tags. This way, they need not wait for QCA8084 series patches to conclude review. Changes in v2: * remove PHY_INTERFACE_MODE_10G_QXGMII from workaround of validation in the phylink_validate_phy. 10G_QXGMII will be set into phy->possible_interfaces in its .config_init method of PHY driver that supports it. Vladimir Oltean (2): net: phy: introduce core support for phy-mode = "10g-qxgmii" dt-bindings: net: ethernet-controller: add 10g-qxgmii mode .../devicetree/bindings/net/ethernet-controller.yaml | 1 + Documentation/networking/phy.rst | 6 ++++++ drivers/net/phy/phy-core.c | 1 + drivers/net/phy/phylink.c | 9 ++++++++- include/linux/phy.h | 4 ++++ include/linux/phylink.h | 1 + 6 files changed, 21 insertions(+), 1 deletion(-) base-commit: 934c29999b57b835d65442da6f741d5e27f3b584 -- 2.34.1
