Re: [PATCH v10 2/3] Documentation: driver-api: pps: Add Intel Timed I/O PPS generator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 12, 2024 at 09:23:58AM +0530, lakshmi.sowjanya.d@xxxxxxxxx wrote:
> From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx>
> 
> Add Intel Timed I/O PPS usage instructions.
> 
> Co-developed-by: Pandith N <pandith.n@xxxxxxxxx>
> Signed-off-by: Pandith N <pandith.n@xxxxxxxxx>
> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Acked-by: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
> ---
>  Documentation/driver-api/pps.rst | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/driver-api/pps.rst b/Documentation/driver-api/pps.rst
> index 78dded03e5d8..75f7b094f963 100644
> --- a/Documentation/driver-api/pps.rst
> +++ b/Documentation/driver-api/pps.rst
> @@ -246,3 +246,27 @@ delay between assert and clear edge as small as possible to reduce system
>  latencies. But if it is too small slave won't be able to capture clear edge
>  transition. The default of 30us should be good enough in most situations.
>  The delay can be selected using 'delay' pps_gen_parport module parameter.
> +
> +
> +Intel Timed I/O PPS signal generator
> +------------------------------------
> +
> +Intel Timed I/O is a high precision device, present on 2019 and newer Intel
> +CPUs, that can generate PPS signals.
> +
> +Timed I/O and system time are both driven by same hardware clock. The signal
> +is generated with a precision of ~20 nanoseconds. The generated PPS signal
> +is used to synchronize an external device with system clock. For example,
> +it can be used to share your clock with a device that receives PPS signal,
> +generated by Timed I/O device. There are dedicated Timed I/O pins to deliver
> +the PPS signal to an external device.
> +
> +Usage of Intel Timed I/O as PPS generator:
> +
> +Start generating PPS signal::
> +
> +        $echo 1 > /sys/devices/platform/INTCxxxx\:00/enable
> +
> +Stop generating PPS signal::
> +
> +        $echo 0 > /sys/devices/platform/INTCxxxx\:00/enable

Why is this not described in Documenation/ABI/ ?

thanks,

greg k-h




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux