Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sebastian,

Thanks to Tony, I've just realized that I missed all your patches, that for some reason ended-up in my junk folder :-(

That being said, I cannot apply any of your DTS patches! What base branch are you using?

Could you repost all your pending DTS patches in one series rebased on top of my for_3.13/dts?

Thanks,
Benoit

On 06/10/2013 22:27, Sebastian Reichel wrote:
Add SSI device tree data for OMAP3 and Nokia N900.

Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
---
  arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++++
  arch/arm/boot/dts/omap3.dtsi     | 47 ++++++++++++++++++++++++++++++++++++++++
  2 files changed, 59 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 0582356..0fbb77e 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -186,6 +186,18 @@
  	power = <50>;
  };

+&ssi_port1 {
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	ssi-char {
+		compatible = "ssi-char";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
+
  &uart1 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&uart1_pins>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7d95cda..9f60b82 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -532,5 +532,52 @@
  			num-eps = <16>;
  			ram-bits = <12>;
  		};
+
+		ssi: ssi-controller@48058000 {
+			compatible = "ti,omap3-ssi";
+			ti,hwmods = "ssi";
+
+			reg = <0x48058000 0x1000>,
+			      <0x48059000 0x1000>;
+			reg-names = "sys",
+				    "gdd";
+
+			interrupts = <71>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ssi_port1: ssi-port@0 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805a000 0x800>,
+				      <0x4805a800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <67>,
+					     <68>;
+				interrupt-names = "mpu_irq0",
+						  "mpu_irq1";
+			};
+
+			ssi_port2: ssi-port@1 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805b000 0x800>,
+				      <0x4805b800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <69>,
+					     <70>;
+				interrupt-names = "mpu_irq0",
+						  "mpu_irq1";
+			};
+		};
  	};
  };



--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux