Re: [PATCH v9 08/19] x86: Secure Launch kernel early boot stub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/4/24 1:54 PM, Ard Biesheuvel wrote:
On Tue, 4 Jun 2024 at 19:34, <ross.philipson@xxxxxxxxxx> wrote:

On 6/4/24 10:27 AM, Ard Biesheuvel wrote:
On Tue, 4 Jun 2024 at 19:24, <ross.philipson@xxxxxxxxxx> wrote:

On 5/31/24 6:33 AM, Ard Biesheuvel wrote:
On Fri, 31 May 2024 at 13:00, Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:

Hello Ross,

On Fri, 31 May 2024 at 03:32, Ross Philipson <ross.philipson@xxxxxxxxxx> wrote:

The Secure Launch (SL) stub provides the entry point for Intel TXT (and
later AMD SKINIT) to vector to during the late launch. The symbol
sl_stub_entry is that entry point and its offset into the kernel is
conveyed to the launching code using the MLE (Measured Launch
Environment) header in the structure named mle_header. The offset of the
MLE header is set in the kernel_info. The routine sl_stub contains the
very early late launch setup code responsible for setting up the basic
environment to allow the normal kernel startup_32 code to proceed. It is
also responsible for properly waking and handling the APs on Intel
platforms. The routine sl_main which runs after entering 64b mode is
responsible for measuring configuration and module information before
it is used like the boot params, the kernel command line, the TXT heap,
an external initramfs, etc.

Signed-off-by: Ross Philipson <ross.philipson@xxxxxxxxxx>
---
    Documentation/arch/x86/boot.rst        |  21 +
    arch/x86/boot/compressed/Makefile      |   3 +-
    arch/x86/boot/compressed/head_64.S     |  30 +
    arch/x86/boot/compressed/kernel_info.S |  34 ++
    arch/x86/boot/compressed/sl_main.c     | 577 ++++++++++++++++++++
    arch/x86/boot/compressed/sl_stub.S     | 725 +++++++++++++++++++++++++
    arch/x86/include/asm/msr-index.h       |   5 +
    arch/x86/include/uapi/asm/bootparam.h  |   1 +
    arch/x86/kernel/asm-offsets.c          |  20 +
    9 files changed, 1415 insertions(+), 1 deletion(-)
    create mode 100644 arch/x86/boot/compressed/sl_main.c
    create mode 100644 arch/x86/boot/compressed/sl_stub.S

diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst
index 4fd492cb4970..295cdf9bcbdb 100644
--- a/Documentation/arch/x86/boot.rst
+++ b/Documentation/arch/x86/boot.rst
@@ -482,6 +482,14 @@ Protocol:  2.00+
               - If 1, KASLR enabled.
               - If 0, KASLR disabled.

+  Bit 2 (kernel internal): SLAUNCH_FLAG
+
+       - Used internally by the setup kernel to communicate
+         Secure Launch status to kernel proper.
+
+           - If 1, Secure Launch enabled.
+           - If 0, Secure Launch disabled.
+
      Bit 5 (write): QUIET_FLAG

           - If 0, print early messages.
@@ -1028,6 +1036,19 @@ Offset/size:     0x000c/4

      This field contains maximal allowed type for setup_data and setup_indirect structs.

+============   =================
+Field name:    mle_header_offset
+Offset/size:   0x0010/4
+============   =================
+
+  This field contains the offset to the Secure Launch Measured Launch Environment
+  (MLE) header. This offset is used to locate information needed during a secure
+  late launch using Intel TXT. If the offset is zero, the kernel does not have
+  Secure Launch capabilities. The MLE entry point is called from TXT on the BSP
+  following a success measured launch. The specific state of the processors is
+  outlined in the TXT Software Development Guide, the latest can be found here:
+  https://urldefense.com/v3/__https://www.intel.com/content/dam/www/public/us/en/documents/guides/intel-txt-software-development-guide.pdf__;!!ACWV5N9M2RV99hQ!Mng0gnPhOYZ8D02t1rYwQfY6U3uWaypJyd1T2rsWz3QNHr9GhIZ9ANB_-cgPExxX0e0KmCpda-3VX8Fj$
+


Could we just repaint this field as the offset relative to the start
of kernel_info rather than relative to the start of the image? That
way, there is no need for patch #1, and given that the consumer of
this field accesses it via kernel_info, I wouldn't expect any issues
in applying this offset to obtain the actual address.


    The Image Checksum
    ==================
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 9189a0e28686..9076a248d4b4 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -118,7 +118,8 @@ vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o
    vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o
    vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a

-vmlinux-objs-$(CONFIG_SECURE_LAUNCH) += $(obj)/early_sha1.o $(obj)/early_sha256.o
+vmlinux-objs-$(CONFIG_SECURE_LAUNCH) += $(obj)/early_sha1.o $(obj)/early_sha256.o \
+       $(obj)/sl_main.o $(obj)/sl_stub.o

    $(obj)/vmlinux: $(vmlinux-objs-y) FORCE
           $(call if_changed,ld)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1dcb794c5479..803c9e2e6d85 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -420,6 +420,13 @@ SYM_CODE_START(startup_64)
           pushq   $0
           popfq

+#ifdef CONFIG_SECURE_LAUNCH
+       /* Ensure the relocation region is coverd by a PMR */

covered

+       movq    %rbx, %rdi
+       movl    $(_bss - startup_32), %esi
+       callq   sl_check_region
+#endif
+
    /*
     * Copy the compressed kernel to the end of our buffer
     * where decompression in place becomes safe.
@@ -462,6 +469,29 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
           shrq    $3, %rcx
           rep     stosq

+#ifdef CONFIG_SECURE_LAUNCH
+       /*
+        * Have to do the final early sl stub work in 64b area.
+        *
+        * *********** NOTE ***********
+        *
+        * Several boot params get used before we get a chance to measure
+        * them in this call. This is a known issue and we currently don't
+        * have a solution. The scratch field doesn't matter. There is no
+        * obvious way to do anything about the use of kernel_alignment or
+        * init_size though these seem low risk with all the PMR and overlap
+        * checks in place.
+        */
+       movq    %r15, %rdi
+       callq   sl_main
+
+       /* Ensure the decompression location is covered by a PMR */
+       movq    %rbp, %rdi
+       movq    output_len(%rip), %rsi
+       callq   sl_check_region
+#endif
+
+       pushq   %rsi

This looks like a rebase error.

           call    load_stage2_idt

           /* Pass boot_params to initialize_identity_maps() */
diff --git a/arch/x86/boot/compressed/kernel_info.S b/arch/x86/boot/compressed/kernel_info.S
index c18f07181dd5..e199b87764e9 100644
--- a/arch/x86/boot/compressed/kernel_info.S
+++ b/arch/x86/boot/compressed/kernel_info.S
@@ -28,6 +28,40 @@ SYM_DATA_START(kernel_info)
           /* Maximal allowed type for setup_data and setup_indirect structs. */
           .long   SETUP_TYPE_MAX

+       /* Offset to the MLE header structure */
+#if IS_ENABLED(CONFIG_SECURE_LAUNCH)
+       .long   rva(mle_header)

... so this could just be mle_header - kernel_info, and the consumer
can do the math instead.

+#else
+       .long   0
+#endif
+
    kernel_info_var_len_data:
           /* Empty for time being... */
    SYM_DATA_END_LABEL(kernel_info, SYM_L_LOCAL, kernel_info_end)
+
+#if IS_ENABLED(CONFIG_SECURE_LAUNCH)
+       /*
+        * The MLE Header per the TXT Specification, section 2.1
+        * MLE capabilities, see table 4. Capabilities set:
+        * bit 0: Support for GETSEC[WAKEUP] for RLP wakeup
+        * bit 1: Support for RLP wakeup using MONITOR address
+        * bit 2: The ECX register will contain the pointer to the MLE page table
+        * bit 5: TPM 1.2 family: Details/authorities PCR usage support
+        * bit 9: Supported format of TPM 2.0 event log - TCG compliant
+        */
+SYM_DATA_START(mle_header)
+       .long   0x9082ac5a  /* UUID0 */
+       .long   0x74a7476f  /* UUID1 */
+       .long   0xa2555c0f  /* UUID2 */
+       .long   0x42b651cb  /* UUID3 */
+       .long   0x00000034  /* MLE header size */
+       .long   0x00020002  /* MLE version 2.2 */
+       .long   rva(sl_stub_entry) /* Linear entry point of MLE (virt. address) */

and these should perhaps be relative to mle_header?

+       .long   0x00000000  /* First valid page of MLE */
+       .long   0x00000000  /* Offset within binary of first byte of MLE */
+       .long   rva(_edata) /* Offset within binary of last byte + 1 of MLE */

and here


Ugh never mind - these are specified externally.

Can you clarify your follow on comment here?


I noticed that -as you pointed out in your previous reply- these
fields cannot be repainted at will, as they are defined by an external
specification.

I'll play a bit more with this code tomorrow - I would *really* like
to avoid the need for patch #1, as it adds another constraint on how
we construct the boot image, and this is already riddled with legacy
and other complications.

Yea I should have read forward through all your replies before
responding to the first one but I think it clarified things as you point
out here. We appreciate you help and suggestions.


OK, so I have a solution that does not require kernel_info at a fixed offset:

- put this at the end of arch/x86/boot/compressed/vmlinux.lds.S

#ifdef CONFIG_SECURE_LAUNCH
PROVIDE(kernel_info_offset      = ABSOLUTE(kernel_info - startup_32));
PROVIDE(mle_header_offset       = kernel_info_offset +
ABSOLUTE(mle_header - startup_32));
PROVIDE(sl_stub_entry_offset    = kernel_info_offset +
ABSOLUTE(sl_stub_entry - startup_32));
PROVIDE(_edata_offset           = kernel_info_offset + ABSOLUTE(_edata
- startup_32));
#endif


and use this for the header fields:

         /* Offset to the MLE header structure */
#if IS_ENABLED(CONFIG_SECURE_LAUNCH)
         .long   mle_header_offset - kernel_info
#else
         .long   0
#endif


Awesome thank you! We will work on incorporating this unless someone else sees a problem with it (or we run into problems and need to revisit).

Ross



SYM_DATA_START(mle_header)
         .long   0x9082ac5a  /* UUID0 */
         .long   0x74a7476f  /* UUID1 */
         .long   0xa2555c0f  /* UUID2 */
         .long   0x42b651cb  /* UUID3 */
         .long   0x00000034  /* MLE header size */
         .long   0x00020002  /* MLE version 2.2 */
         .long   sl_stub_entry_offset - kernel_info /* Linear entry
point of MLE (virt. address) */
         .long   0x00000000  /* First valid page of MLE */
         .long   0x00000000  /* Offset within binary of first byte of MLE */
         .long   _edata_offset - kernel_info /* Offset within binary of
last byte + 1 of MLE */
         .long   0x00000227  /* Bit vector of MLE-supported capabilities */
         .long   0x00000000  /* Starting linear address of command line
(unused) */
         .long   0x00000000  /* Ending linear address of command line (unused) */






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux