Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Oct 16, 2013 at 01:24:11AM +0530, Kishon Vijay Abraham I wrote:
> There can be systems which does not have a external usb_phy, so get
> usb_phy only if dt data indicates the presence of PHY in the case of dt boot or
> if platform_data indicates the presence of PHY. Also remove checking if
> return value is -ENXIO since it's now changed to always enable usb_phy layer.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>

I'm fine with this patch, but one comment below:

> @@ -387,16 +388,49 @@ static int dwc3_probe(struct platform_device *pdev)
>  	if (node) {
>  		dwc->maximum_speed = of_usb_get_maximum_speed(node);
>  
> -		dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
> -		dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
> +		count = of_count_phandle_with_args(node, "usb-phy", NULL);
> +		switch (count) {
> +		case 2:
> +			dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev,
> +				"usb-phy", 1);
> +			if (IS_ERR(dwc->usb3_phy)) {
> +				dev_err(dev, "usb3 phy not found\n");
> +				return PTR_ERR(dwc->usb3_phy);
> +			}
> +		case 1:
> +			dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev,
> +				"usb-phy", 0);
> +			if (IS_ERR(dwc->usb2_phy)) {
> +				dev_err(dev, "usb2 phy not found\n");
> +				return PTR_ERR(dwc->usb2_phy);
> +			}
> +			break;
> +		default:
> +			dev_err(dev, "usb phy nodes not configured\n");
> +		}
>  
>  		dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
>  		dwc->dr_mode = of_usb_get_dr_mode(node);
>  	} else if (pdata) {
>  		dwc->maximum_speed = pdata->maximum_speed;
>  
> -		dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> -		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
> +		if (pdata->usb2_phy) {
> +			dwc->usb2_phy = devm_usb_get_phy(dev,
> +				USB_PHY_TYPE_USB2);
> +			if (IS_ERR(dwc->usb2_phy)) {
> +				dev_err(dev, "usb2 phy not found\n");
> +				return PTR_ERR(dwc->usb2_phy);
> +			}
> +		}
> +
> +		if (pdata->usb3_phy) {
> +			dwc->usb3_phy = devm_usb_get_phy(dev,
> +				USB_PHY_TYPE_USB3);
> +			if (IS_ERR(dwc->usb3_phy)) {
> +				dev_err(dev, "usb3 phy not found\n");
> +				return PTR_ERR(dwc->usb3_phy);
> +			}
> +		}
>  
>  		dwc->needs_fifo_resize = pdata->tx_fifo_resize;
>  		dwc->dr_mode = pdata->dr_mode;
> @@ -409,36 +443,6 @@ static int dwc3_probe(struct platform_device *pdev)
>  	if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
>  		dwc->maximum_speed = USB_SPEED_SUPER;
>  
> -	if (IS_ERR(dwc->usb2_phy)) {
> -		ret = PTR_ERR(dwc->usb2_phy);
> -
> -		/*
> -		 * if -ENXIO is returned, it means PHY layer wasn't
> -		 * enabled, so it makes no sense to return -EPROBE_DEFER
> -		 * in that case, since no PHY driver will ever probe.
> -		 */
> -		if (ret == -ENXIO)
> -			return ret;
> -
> -		dev_err(dev, "no usb2 phy configured\n");
> -		return -EPROBE_DEFER;
> -	}
> -
> -	if (IS_ERR(dwc->usb3_phy)) {
> -		ret = PTR_ERR(dwc->usb3_phy);
> -
> -		/*
> -		 * if -ENXIO is returned, it means PHY layer wasn't
> -		 * enabled, so it makes no sense to return -EPROBE_DEFER
> -		 * in that case, since no PHY driver will ever probe.
> -		 */
> -		if (ret == -ENXIO)
> -			return ret;
> -
> -		dev_err(dev, "no usb3 phy configured\n");
> -		return -EPROBE_DEFER;
> -	}

the idea for doing the error checking here was actually to avoid
duplicating it in all previous cases, as you did. Please keep the error
checking here and you're good to go.

> -
>  	dwc->xhci_resources[0].start = res->start;
>  	dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
>  					DWC3_XHCI_REGS_END;
> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> index 7db34f0..49ffa6d 100644
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -24,4 +24,6 @@ struct dwc3_platform_data {
>  	enum usb_device_speed maximum_speed;
>  	enum usb_dr_mode dr_mode;
>  	bool tx_fifo_resize;
> +	bool usb2_phy;
> +	bool usb3_phy;

This would look better as a quirks flag, then we could:

unsigned long quirks;
#define DWC3_QUIRK_NO_USB3_PHY	BIT(0)
#define DWC3_QUIRK_NO_USB2_PHY	BIT(1)

...

if (!test_bit(DWC3_QUIRK_NO_USB3_PHY), &dwc->quirks &&
	dwc->has_usb3_phy) {
	grab_usb3_phy();
}

cheers

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux