Re: [PATCH v2 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 14, 2013 at 07:08:24PM +0400, Vyacheslav Tyrtov wrote:
> From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
> 
> Add EDCS(Exynos Dual Cluster Support) for Samsung Exynos5410 SoC.
> This enables all 8 cores, 4 x A7 and 4 x A15 run at the same time.
> 
> Signed-off-by: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@xxxxxxxxxxx>
> ---
>  arch/arm/mach-exynos/Makefile |   2 +
>  arch/arm/mach-exynos/edcs.c   | 270 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 272 insertions(+)
>  create mode 100644 arch/arm/mach-exynos/edcs.c
> 
> diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
> index 5369615..ba6efdb 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -34,3 +34,5 @@ AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
>  
>  obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
>  obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
> +
> +obj-$(CONFIG_SOC_EXYNOS5410)		+= edcs.o
> diff --git a/arch/arm/mach-exynos/edcs.c b/arch/arm/mach-exynos/edcs.c
> new file mode 100644
> index 0000000..e304bd9
> --- /dev/null
> +++ b/arch/arm/mach-exynos/edcs.c
> @@ -0,0 +1,270 @@
> +/*
> + * arch/arm/mach-exynos/edcs.c - exynos dual cluster power management support
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * Author: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * EDCS(exynos dual cluster support) for Exynos5410 SoC.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/spinlock.h>
> +#include <linux/errno.h>
> +
> +#include <asm/mcpm.h>
> +#include <asm/proc-fns.h>
> +#include <asm/cacheflush.h>
> +#include <asm/cputype.h>
> +#include <asm/cp15.h>
> +
> +#include <linux/arm-cci.h>
> +#include <mach/regs-pmu.h>
> +
> +#define EDCS_CPUS_PER_CLUSTER	4
> +#define EDCS_CLUSTERS		2
> +
> +/* Exynos5410 power management registers */
> +#define EDCS_CORE_CONFIGURATION(_nr)	(S5P_ARM_CORE0_CONFIGURATION	\
> +						+ ((_nr) * 0x80))
> +#define EDCS_CORE_STATUS(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x4)
> +#define EDCS_CORE_OPTION(_nr)		(EDCS_CORE_CONFIGURATION(_nr) + 0x8)
> +
> +#define REG_CPU_STATE_ADDR0		(S5P_VA_SYSRAM_NS + 0x28)

Is there any reason why S5P_VA_SYSRAM_NS needs to be a static mapping?

> +#define REG_CPU_STATE_ADDR(_nr)		(REG_CPU_STATE_ADDR0 +	\
> +						 _nr * EDCS_CPUS_PER_CLUSTER)
> +
> +static arch_spinlock_t edcs_lock = __ARCH_SPIN_LOCK_UNLOCKED;
> +
> +static int edcs_use_count[EDCS_CPUS_PER_CLUSTER][EDCS_CLUSTERS];
> +static int core_count[EDCS_CLUSTERS];
> +
> +static void exynos_core_power_control(unsigned int cpu, unsigned int cluster,
> +				bool enable)
> +{
> +	unsigned int offset = cluster * EDCS_CPUS_PER_CLUSTER + cpu;
> +	int value = enable ? S5P_CORE_LOCAL_PWR_EN : 0;
> +
> +	if ((__raw_readl(EDCS_CORE_STATUS(offset)) & 0x3) != value)
> +		__raw_writel(value, EDCS_CORE_CONFIGURATION(offset));

I think you need to replace all the __raw_readl() / __raw_writel() calls
in this file with readl_relaxed() / writel_relaxed().

This ensures little-endian byte order, so that BE8 kernels will work.

> +}
> +
> +static void exynos_core_power_up(unsigned int cpu, unsigned int cluster)
> +{
> +	exynos_core_power_control(cpu, cluster, true);
> +}
> +
> +static void exynos_core_power_down(unsigned int cpu, unsigned int cluster)
> +{
> +	exynos_core_power_control(cpu, cluster, false);
> +}
> +
> +void set_boot_flag(unsigned int cpu, unsigned int mode)
> +{
> +	__raw_writel(mode, REG_CPU_STATE_ADDR(cpu));
> +}
> +
> +static int exynos_power_up(unsigned int cpu, unsigned int cluster)
> +{
> +	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
> +	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER || cluster >= EDCS_CLUSTERS);
> +
> +	local_irq_disable();
> +	arch_spin_lock(&edcs_lock);
> +
> +	edcs_use_count[cpu][cluster]++;
> +	if (edcs_use_count[cpu][cluster] == 1) {
> +		++core_count[cluster];
> +		set_boot_flag(cpu, 0x2);

0x2 looks like a magic number.  Can we have a #define for that?


If the boot flag is read by the inbound CPU or by a peripheral then
there are memory ordering issues to take into account.  Otherwise, can't
the inbound CPU come online and race with the write to the boot flag?

What is the memory type of REG_STATE_ADDR()?

> +		exynos_core_power_up(cpu, cluster);
> +	} else if (edcs_use_count[cpu][cluster] != 2) {
> +		/*
> +		 * The only possible values are:
> +		 * 0 = CPU down
> +		 * 1 = CPU (still) up
> +		 * 2 = CPU requested to be up before it had a chance
> +		 *     to actually make itself down.
> +		 * Any other value is a bug.
> +		 */
> +		BUG();
> +	}
> +
> +	arch_spin_unlock(&edcs_lock);
> +	local_irq_enable();
> +
> +	return 0;
> +}
> +static void exynos_power_down(void)
> +{
> +	unsigned int mpidr, cpu, cluster;
> +	bool last_man = false, skip_wfi = false;
> +
> +	mpidr = read_cpuid_mpidr();
> +	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
> +	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
> +
> +	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
> +	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
> +
> +	__mcpm_cpu_going_down(cpu, cluster);
> +
> +	arch_spin_lock(&edcs_lock);
> +	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
> +	edcs_use_count[cpu][cluster]--;
> +	if (edcs_use_count[cpu][cluster] == 0) {
> +		--core_count[cluster];
> +		if (core_count[cluster] == 0)
> +			last_man = true;
> +	} else if (edcs_use_count[cpu][cluster] == 1) {
> +		/*
> +		 * A power_up request went ahead of us.
> +		 * Even if we do not want to shut this CPU down,
> +		 * the caller expects a certain state as if the WFI
> +		 * was aborted.  So let's continue with cache cleaning.
> +		 */
> +		skip_wfi = true;
> +	} else
> +		BUG();

For TC2, Lorenzo discovered need to disable the GIC CPU interface, so
that no suprious wakeups can happen once the power controller is
configured to power the CPU down.

The problem is that a spurious wakeup can trigger a race in the power
controller when the last man powers down, where the power controller
continues to wait for the cluster to power down, but it never happens.

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/200917.html
([PATCH v2] arm: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down)


This might not be a problem for Exynos5410 -- it depends on the way the
power control logic works.

On the other hand, disabling the GIC CPU interface here is cheap to do,
even if it's not really needed.

> +
> +	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
> +		arch_spin_unlock(&edcs_lock);
> +
> +		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
> +			/*
> +			 * On the Cortex-A15 we need to disable
> +			 * L2 prefetching before flushing the cache.
> +			 */
> +			asm volatile(
> +			"mcr	p15, 1, %0, c15, c0, 3\n\t"
> +			"isb\n\t"
> +			"dsb"
> +			: : "r" (0x400));
> +		}
> +
> +		/*
> +		 * We need to disable and flush the whole (L1 and L2) cache.
> +		 * Let's do it in the safest possible way i.e. with
> +		 * no memory access within the following sequence
> +		 * including the stack.
> +		 *
> +		 * Note: fp is preserved to the stack explicitly prior doing
> +		 * this since adding it to the clobber list is incompatible
> +		 * with having CONFIG_FRAME_POINTER=y.
> +		 */
> +		asm volatile(
> +		"str	fp, [sp, #-4]!\n\t"
> +		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
> +		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
> +		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
> +		"isb\n\t"
> +		"bl	v7_flush_dcache_all\n\t"
> +		"clrex\n\t"
> +		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
> +		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
> +		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
> +		"isb\n\t"
> +		"dsb\n\t"
> +		"ldr	fp, [sp], #4"
> +		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
> +			"r9", "r10", "lr", "memory");

For these code sequences, please take a look at

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/205085.html
[PATCH] ARM: cacheflush: consolidate single-CPU ARMv7 cache disabling code

The aim is to consolidate on a macro that can be shared between
backends.

> +
> +		cci_disable_port_by_cpu(mpidr);
> +
> +		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
> +
> +	} else {
> +		arch_spin_unlock(&edcs_lock);
> +		/*
> +			* We need to disable and flush only the L1 cache.
> +			* Let's do it in the safest possible way as above.
> +		*/
> +		asm volatile(
> +		"str	fp, [sp, #-4]!\n\t"
> +		"mrc	p15, 0, r0, c1, c0, 0	@ get CR\n\t"
> +		"bic	r0, r0, #"__stringify(CR_C)"\n\t"
> +		"mcr	p15, 0, r0, c1, c0, 0	@ set CR\n\t"
> +		"isb\n\t"
> +		"bl	v7_flush_dcache_louis\n\t"
> +		"clrex\n\t"
> +		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR\n\t"
> +		"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t"
> +		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR\n\t"
> +		"isb\n\t"
> +		"dsb\n\t"
> +		"ldr	fp, [sp], #4"
> +		: : : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
> +		      "r9", "r10", "lr", "memory");
> +
> +	}
> +	__mcpm_cpu_down(cpu, cluster);
> +
> +	if (!skip_wfi) {
> +		exynos_core_power_down(cpu, cluster);
> +		wfi();
> +	}
> +}
> +
> +static const struct mcpm_platform_ops exynos_power_ops = {
> +	.power_up	= exynos_power_up,
> +	.power_down	= exynos_power_down,
> +};
> +
> +static void __init edcs_data_init(void)
> +{
> +	unsigned int mpidr, cpu, cluster;
> +
> +	mpidr = read_cpuid_mpidr();
> +	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
> +	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
> +
> +	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
> +	BUG_ON(cpu >= EDCS_CPUS_PER_CLUSTER  || cluster >= EDCS_CLUSTERS);
> +	edcs_use_count[cpu][cluster] = 1;
> +	++core_count[cluster];
> +}
> +
> +/*
> + * Enable cluster-level coherency, in preparation for turning on the MMU.
> + */
> +static void __naked edcs_power_up_setup(unsigned int affinity_level)
> +{
> +	asm volatile ("\n"
> +	"b	cci_enable_port_for_self");
> +}
> +
> +static int __init edcs_init(void)
> +{
> +	int ret;
> +	struct device_node *node;
> +
> +	node = of_find_compatible_node(NULL, NULL, "samsung,exynos5410");
> +	if (!node)
> +		return -ENODEV;
> +
> +	if (!cci_probed())
> +		return -ENODEV;
> +
> +	/*
> +	 * Future entries into the kernel can now go
> +	 * through the cluster entry vectors.
> +	 */
> +	__raw_writel(virt_to_phys(mcpm_entry_point),
> +				S5P_VA_SYSRAM_NS + 0x1c);

It would me more readable to have a #define to describe what
S5P_VA_SYSRAM_NS + 0x1c is.


Also, what is the memory type of S5P_VA_SYSRAM_NS?  How is the entry
point address value read?  Does the inbound CPU's boot ROM or firmware
read it?

If it is read via some non-coherent side-channel, or if S5P_VA_SYSRAM_NS
is mapped as normal memory then we would need some explicit
synchronisation, but I suspect this is not the case (?)

Cheers
---Dave

> +
> +	edcs_data_init();
> +	mcpm_smp_set_ops();
> +
> +	ret = mcpm_platform_register(&exynos_power_ops);
> +	if (!ret) {
> +		mcpm_sync_init(edcs_power_up_setup);
> +		pr_info("EDCS power management initialized\n");
> +	}
> +	return ret;
> +}
> +
> +early_initcall(edcs_init);
> -- 
> 1.8.1.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux