Re: [PATCH] WAN: Adding support for Infineon PEF2256 E1 chipset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 16, 2013 at 10:25 AM, Christophe Leroy
<christophe.leroy@xxxxxx> wrote:
> The patch adds WAN support for Infineon PEF2256 E1 Chipset.
>
> Signed-off-by: Jerome Chantelauze <jerome.chantelauze@xxxxxx>
> Acked-by: Christophe Leroy <christophe.leroy@xxxxxx>

[snip]

> diff -urN a/Documentation/devicetree/bindings/net/pef2256.txt b/Documentation/devicetree/bindings/net/pef2256.txt
> --- a/Documentation/devicetree/bindings/net/pef2256.txt 1970-01-01 01:00:00.000000000 +0100
> +++ b/Documentation/devicetree/bindings/net/pef2256.txt 2013-10-13 15:05:42.000000000 +0200
> @@ -0,0 +1,29 @@
> +* Wan on Infineon pef2256 E1 controller
> +
> +Required properties:
> +- compatible: Should be "infineon,pef2256"
> +- reg: Address and length of the register set for the device
> +- interrupts: Should contain interrupts
> +
> +Optional properties:
> +- data-rate: Data rate on the system highway.
> +  Supported values are: 2, 4, 8, 16.
> +  8 if not defined.

What are the units? Specify them in the property name.

> +- channel-phase: First time slot transmission channel phase.
> +  Supported values are: 0, 1, 2, 3, 4, 5, 6, 7.
> +  0 if not defined.

This description basically tells me nothing.

> +- rising-edge-sync-pulse: rising edge synchronous pulse.
> +  Supported values are: "receive", "transmit".
> +  "transmit" if not defined.

Are receive and transmit mutually exclusive? If so, then wouldn't a
single property like "rx-rising-edge-sync-pulse" be sufficient.

> +
> +Examples:
> +
> +       e1-wan@4,2000000 {
> +               compatible = "infineon,pef2256";
> +               reg = <4 0x2000000 0xFF>;
> +               interrupts = <8 1>;
> +               interrupt-parent = <&PIC>;
> +               data-rate = <4>;
> +               channel-phase = <1>;
> +               rising-edge-sync-pulse = "transmit";
> +       };
> diff -urN a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
> --- a/drivers/net/wan/Makefile  1970-01-01 01:00:00.000000000 +0100
> +++ b/drivers/net/wan/Makefile  2013-10-13 13:05:01.000000000 +0200
> @@ -22,6 +22,7 @@
>  obj-$(CONFIG_COSA)             += cosa.o
>  obj-$(CONFIG_FARSYNC)          += farsync.o
>  obj-$(CONFIG_DSCC4)             += dscc4.o
> +obj-$(CONFIG_PEF2256)           += pef2256.o
>  obj-$(CONFIG_X25_ASY)          += x25_asy.o
>
>  obj-$(CONFIG_LANMEDIA)         += lmc/
> diff -urN a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
> --- a/drivers/net/wan/Kconfig   1970-01-01 01:00:00.000000000 +0100
> +++ b/drivers/net/wan/Kconfig   2013-10-13 13:05:01.000000000 +0200
> @@ -266,6 +266,16 @@
>           To compile this driver as a module, choose M here: the
>           module will be called farsync.
>
> +config PEF2256
> +       tristate "PEF2256 support"
> +       depends on HDLC && OF && SYSFS

It would be better if this can build without OF selected.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux