On Fri, 10 May 2024 18:57:28 +0530, Pankaj Gupta wrote: > The NXP security hardware IP(s) like: i.MX EdgeLock Enclave, V2X etc., > creates an embedded secure enclave within the SoC boundary to enable > features like: > - HSM > - SHE > - V2X > > Secure-Enclave(s) communication interface are typically via message > unit, i.e., based on mailbox linux kernel driver. This driver enables > communication ensuring well defined message sequence protocol between > Application Core and enclave's firmware. > > Driver configures multiple misc-device on the MU, for multiple > user-space applications, to be able to communicate over single MU. > > It exists on some i.MX processors. e.g. i.MX8ULP, i.MX93 etc. > > Signed-off-by: Pankaj Gupta <pankaj.gupta@xxxxxxx> > --- > .../devicetree/bindings/firmware/fsl,imx-se.yaml | 186 +++++++++++++++++++++ > 1 file changed, 186 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: /example-2/v2x: failed to match any schema with compatible: ['fsl,imx95-v2x'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240510-imx-se-if-v1-2-27c5a674916d@xxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
