On 10/15/2013 02:57 PM, Felipe Balbi wrote:
> Hi,
>
> On Mon, Oct 14, 2013 at 01:21:29PM +0300, Roger Quadros wrote:
>> +Vivek
>>
>> On 10/14/2013 12:26 PM, Kishon Vijay Abraham I wrote:
>>> Hi Roger,
>>>
>>> On Friday 11 October 2013 08:39 PM, Roger Quadros wrote:
>>>> Hi,
>>>>
>>>> On 09/02/2013 06:43 PM, Kishon Vijay Abraham I wrote:
>>>>> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
>>>>> power_on and power_off the following APIs are used phy_init(), phy_exit(),
>>>>> phy_power_on() and phy_power_off().
>>>>>
>>>>> However using the old USB phy library wont be removed till the PHYs of all
>>>>> other SoC's using dwc3 core is adapted to the Generic PHY Framework.
>>>>>
>>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>>>> ---
>>>>> Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++-
>>>>> drivers/usb/dwc3/Kconfig | 1 +
>>>>> drivers/usb/dwc3/core.c | 49 ++++++++++++++++++++++++
>>>>> drivers/usb/dwc3/core.h | 7 ++++
>>>>> 4 files changed, 61 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> index e807635..471366d 100644
>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> @@ -6,11 +6,13 @@ Required properties:
>>>>> - compatible: must be "snps,dwc3"
>>>>> - reg : Address and length of the register set for the device
>>>>> - interrupts: Interrupts used by the dwc3 controller.
>>>>> +
>>>>> +Optional properties:
>>>>> - usb-phy : array of phandle for the PHY device. The first element
>>>>> in the array is expected to be a handle to the USB2/HS PHY and
>>>>> the second element is expected to be a handle to the USB3/SS PHY
>>>>> -
>>>>> -Optional properties:
>>>>> + - phys: from the *Generic PHY* bindings
>>>>> + - phy-names: from the *Generic PHY* bindings
>>>>> - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
>>>>>
>>>>> This is usually a subnode to DWC3 glue to which it is connected.
>>>>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>>>>> index cfc16dd..ad7ce83 100644
>>>>> --- a/drivers/usb/dwc3/Kconfig
>>>>> +++ b/drivers/usb/dwc3/Kconfig
>>>>> @@ -3,6 +3,7 @@ config USB_DWC3
>>>>> depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
>>>>> depends on EXTCON
>>>>> select USB_PHY
>>>>> + select GENERIC_PHY
>>>>> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
>>>>> help
>>>>> Say Y or M here if your system has a Dual Role SuperSpeed
>>>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>>>> index 428c29e..485d365 100644
>>>>> --- a/drivers/usb/dwc3/core.c
>>>>> +++ b/drivers/usb/dwc3/core.c
>>>>> @@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
>>>>>
>>>>> usb_phy_init(dwc->usb2_phy);
>>>>> usb_phy_init(dwc->usb3_phy);
>>>>
>>>> How about adding
>>>> + if (dwc->usb2_phy)
>>>> + usb_phy_init(dwc->usb2_phy);
>>>> + if (dwc->usb3_phy)
>>>> + usb_phy_init(dwc->usb3_phy);
>>>
>>> Thankfully that usb_phy_init will check if phy is NULL.
>>>>
>>>> both usb phy and generic phy shouldn't be present together.
>>>
>>> ok.
>>>>
>>>>> +
>>>>> + if (dwc->usb2_generic_phy)
>>>>> + phy_init(dwc->usb2_generic_phy);
>>>>> + if (dwc->usb3_generic_phy)
>>>>> + phy_init(dwc->usb3_generic_phy);
>>>>> +
>>>>> mdelay(100);
>>>>>
>>>>> /* Clear USB3 PHY reset */
>>>>> @@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc)
>>>>> {
>>>>> usb_phy_shutdown(dwc->usb2_phy);
>>>>> usb_phy_shutdown(dwc->usb3_phy);
>>>>
>>>> here as well
>>>>
>>>>> +
>>>>> + if (dwc->usb2_generic_phy)
>>>>> + phy_power_off(dwc->usb2_generic_phy);
>>>>> + if (dwc->usb3_generic_phy)
>>>>> + phy_power_off(dwc->usb3_generic_phy);
>>>>> }
>>>>>
>>>>> #define DWC3_ALIGN_MASK (16 - 1)
>>>>> @@ -427,6 +438,23 @@ static int dwc3_probe(struct platform_device *pdev)
>>>>> dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>>>>> }
>>>>>
>>>>> + if (of_property_read_bool(node, "phys") || pdata->has_phy) {
>>>>> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
>>>>> + if (IS_ERR(dwc->usb2_generic_phy)) {
>>>>> + dev_err(dev, "no usb2 phy configured yet");
>>>>> + return PTR_ERR(dwc->usb2_generic_phy);
>>>>> + }
>>>>> +
>>>>> + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
>>>>> + if (IS_ERR(dwc->usb3_generic_phy)) {
>>>>> + dev_err(dev, "no usb3 phy configured yet");
>>>>> + return PTR_ERR(dwc->usb3_generic_phy);
>>>>> + }
>>>>
>>>> better to add
>>>> + /* Don't use USB PHY if generic PHY was found */
>>>> + dwc->usb2_phy = dwc->usb3_phy = NULL;
>>>
>>> ok.
>>>>
>>>>> + } else {
>>>>
>>>> not required as we've used kzalloc for dwc.
>>>>
>>>>> + dwc->usb2_generic_phy = NULL;
>>>>> + dwc->usb3_generic_phy = NULL;
>>>>> + }
>>>>> +
>>>>> /* default to superspeed if no maximum_speed passed */
>>>>> if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
>>>>> dwc->maximum_speed = USB_SPEED_SUPER;
>>>>> @@ -450,6 +478,11 @@ static int dwc3_probe(struct platform_device *pdev)
>>>>
>>>> if (dwc->usb2_phy)
>>>>
>>>>> usb_phy_set_suspend(dwc->usb2_phy, 0);
>>>>
>>>> if (dwc->usb3_phy)
>>>>
>>>>> usb_phy_set_suspend(dwc->usb3_phy, 0);
>>>>>
>>>>> + if (dwc->usb2_generic_phy)
>>>>> + phy_power_on(dwc->usb2_generic_phy);
>>>>> + if (dwc->usb3_generic_phy)
>>>>> + phy_power_on(dwc->usb3_generic_phy);
>>>>> +
>>>>> spin_lock_init(&dwc->lock);
>>>>> platform_set_drvdata(pdev, dwc);
>>>>>
>>>>> @@ -576,6 +609,11 @@ static int dwc3_remove(struct platform_device *pdev)
>>>>
>>>> if (dwc->usb2_phy)
>>>>> usb_phy_set_suspend(dwc->usb2_phy, 1);
>>>>
>>>> if (dwc->usb3_phy)
>>>>> usb_phy_set_suspend(dwc->usb3_phy, 1);
>>>>>
>>>>> + if (dwc->usb2_generic_phy)
>>>>> + phy_power_off(dwc->usb2_generic_phy);
>>>>> + if (dwc->usb3_generic_phy)
>>>>> + phy_power_off(dwc->usb3_generic_phy);
>>>>> +
>>>>> pm_runtime_put(&pdev->dev);
>>>>> pm_runtime_disable(&pdev->dev);
>>>>>
>>>>> @@ -673,6 +711,11 @@ static int dwc3_suspend(struct device *dev)
>>>>
>>>> if (dwc->usb3_phy)
>>>>> usb_phy_shutdown(dwc->usb3_phy);
>>>>
>>>> if (dwc->usb2_phy)
>>>>> usb_phy_shutdown(dwc->usb2_phy);
>>>>>
>>>>> + if (dwc->usb2_generic_phy)
>>>>> + phy_exit(dwc->usb2_generic_phy);
>>>>> + if (dwc->usb3_generic_phy)
>>>>> + phy_exit(dwc->usb3_generic_phy);
>>>>> +
>>>>> return 0;
>>>>> }
>>>>>
>>>>> @@ -683,6 +726,12 @@ static int dwc3_resume(struct device *dev)
>>>>>
>>>>
>>>> if (dwc->usb3_phy)
>>>>> usb_phy_init(dwc->usb3_phy);
>>>>
>>>> if (dwc->usb2_phy)
>>>>> usb_phy_init(dwc->usb2_phy);
>>>>> +
>>>>> + if (dwc->usb2_generic_phy)
>>>>> + phy_init(dwc->usb2_generic_phy);
>>>>> + if (dwc->usb3_generic_phy)
>>>>> + phy_init(dwc->usb3_generic_phy);
>>>>> +
>>>>> msleep(100);
>>>>>
>>>>> spin_lock_irqsave(&dwc->lock, flags);
>>>>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>>>>> index f8af8d4..01ec7d7 100644
>>>>> --- a/drivers/usb/dwc3/core.h
>>>>> +++ b/drivers/usb/dwc3/core.h
>>>>> @@ -31,6 +31,8 @@
>>>>> #include <linux/usb/gadget.h>
>>>>> #include <linux/usb/otg.h>
>>>>>
>>>>> +#include <linux/phy/phy.h>
>>>>> +
>>>>> /* Global constants */
>>>>> #define DWC3_EP0_BOUNCE_SIZE 512
>>>>> #define DWC3_ENDPOINTS_NUM 32
>>>>> @@ -613,6 +615,8 @@ struct dwc3_scratchpad_array {
>>>>> * @dr_mode: requested mode of operation
>>>>> * @usb2_phy: pointer to USB2 PHY
>>>>> * @usb3_phy: pointer to USB3 PHY
>>>>> + * @usb2_generic_phy: pointer to USB2 PHY
>>>>> + * @usb3_generic_phy: pointer to USB3 PHY
>>>>> * @dcfg: saved contents of DCFG register
>>>>> * @gctl: saved contents of GCTL register
>>>>> * @is_selfpowered: true when we are selfpowered
>>>>> @@ -665,6 +669,9 @@ struct dwc3 {
>>>>> struct usb_phy *usb2_phy;
>>>>> struct usb_phy *usb3_phy;
>>>>>
>>>>> + struct phy *usb2_generic_phy;
>>>>> + struct phy *usb3_generic_phy;
>>>>> +
>>>>> void __iomem *regs;
>>>>> size_t regs_size;
>>>>>
>>>>>
>>>
>>> Do you have any suggestions on how to get only individual PHYs? like only
>>> usb2phy or usb3phy?
>>
>> My earlier understanding was that both PHYs are needed only if .speed is "super-speed"
>> and only usb2phy is needed for "high-speed". But as per Vivek's email it seems
>> Samsung's exynos5 SoC doesn't need usb2phy for "super-speed".
>>
>> So to keeps things flexible, I can propose the following approach
>> - if speed == 'high-speed' usb2phy must be present. usb3phy will be ignored if supplied.
>> - if speed == 'super-speed' usb3phy must be present and usb2phy is optional but must be
>> initialized if supplied.
>> - if speed is not specified, we default to 'super-speed'.
>>
>> Felipe, does this address the issue you were facing with OMAP5?
>
> on OMAP5 we cannot skip USB3 PHY initialization. But then it becomes a
> question of supporting a test feature (in OMAP5 case it would be cool to
> force controller to lower speeds for testing) or coping with a broken
> DTS.
>
I don't think we can protect ourselves from all possible broken configurations of DTS.
I would vote for simplicity and maximum flexibility.
So IMO we should just depend on DTS to provide the phys that are needed by the platform.
In the driver we initialize whatever PHY is provided and don't complain if any or even all PHYs are missing.
If this is not good enough then could you please suggest an alternative? Thanks.
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
