This adds omap control module support for USBSS in AM437x SoC.
Update DT binding information to reflect these changes.
Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
Changes from v1:
Make ON and OFF operations symmetric.
Documentation/devicetree/bindings/usb/omap-usb.txt | 2 ++
drivers/usb/phy/phy-omap-control.c | 19 +++++++++++++++++++
include/linux/usb/omap_control_usb.h | 6 ++++++
3 files changed, 27 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 090e5e2..c495135 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -87,6 +87,8 @@ Required properties:
e.g. USB3 PHY and SATA PHY on OMAP5.
"ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
DRA7 platform.
+ "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
+ AM437 platform.
- reg : Address and length of the register set for the device. It contains
the address of "otghs_control" for control-phy-otghs or "power" register
for other types.
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index 09c5ace..e725318 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -84,6 +84,20 @@ void omap_control_usb_phy_power(struct device *dev, int on)
else
val |= OMAP_CTRL_USB2_PHY_PD;
break;
+
+ case OMAP_CTRL_TYPE_AM437USB2:
+ if (on) {
+ val &= ~(AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ val |= (AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ } else {
+ val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ val |= (AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ }
+ break;
default:
dev_err(dev, "%s: type %d not recognized\n",
__func__, control_usb->type);
@@ -197,6 +211,7 @@ static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
static const struct of_device_id omap_control_usb_id_table[] = {
{
@@ -215,6 +230,10 @@ static const struct of_device_id omap_control_usb_id_table[] = {
.compatible = "ti,control-phy-dra7usb2",
.data = &dra7usb2_data,
},
+ {
+ .compatible = "ti,control-phy-am437usb2",
+ .data = &am437usb2_data,
+ },
{},
};
MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index 596b019..69ae383 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -24,6 +24,7 @@ enum omap_control_usb_type {
OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+ OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
};
struct omap_control_usb {
@@ -64,6 +65,11 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
+#define AM437X_CTRL_USB2_PHY_PD BIT(0)
+#define AM437X_CTRL_USB2_OTG_PD BIT(1)
+#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
+#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
+
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
extern void omap_control_usb_phy_power(struct device *dev, int on);
extern void omap_control_usb_set_mode(struct device *dev,
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
