The small paragraph describing how to register widgets is incomplete (does
not mention routes) and mentions snd_soc_dapm_new_control() which is not
really used. Moreover it appears as a part of the "Virtual Widgets"
subsection.
Replace it with a detailed and current description of how widgets and
routes are registered, mentioning both static declaration and runtime
registration. Also make this a section on its own.
Reviewed-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Reviewed-by: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
---
Documentation/sound/soc/dapm.rst | 38 ++++++++++++++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
diff --git a/Documentation/sound/soc/dapm.rst b/Documentation/sound/soc/dapm.rst
index 58ef880ac8b6..4b094c3d7942 100644
--- a/Documentation/sound/soc/dapm.rst
+++ b/Documentation/sound/soc/dapm.rst
@@ -251,8 +251,42 @@ a virtual widget - a widget with no control bits e.g.
This can be used to merge two signal paths together in software.
-After all the widgets have been defined, they can then be added to the DAPM
-subsystem individually with a call to snd_soc_dapm_new_control().
+Registering DAPM controls
+=========================
+
+In many cases the DAPM widgets implemented statically in a ``static const
+struct snd_soc_dapm_widget`` array and the routes connecting them in a
+``static const struct snd_soc_dapm_route`` array in a codec driver, and
+simply declared via the ``dapm_widgets`` and ``num_dapm_widgets`` fields of
+the ``struct snd_soc_component_driver`` so the driver registration will
+take care of populating them::
+
+ static const struct snd_soc_dapm_widget wm2000_dapm_widgets[] = {
+ SND_SOC_DAPM_OUTPUT("SPKN"),
+ SND_SOC_DAPM_OUTPUT("SPKP"),
+ ...
+ };
+
+ /* Target, Path, Source */
+ static const struct snd_soc_dapm_route wm2000_audio_map[] = {
+ { "SPKN", NULL, "ANC Engine" },
+ { "SPKP", NULL, "ANC Engine" },
+ ...
+ };
+
+ static const struct snd_soc_component_driver soc_component_dev_wm2000 = {
+ ...
+ .dapm_widgets = wm2000_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm2000_dapm_widgets),
+ ...
+ };
+
+In more complex cases the list of DAPM widgets and/or routes can be only
+known at build time. This happens for example when a driver supports
+different models having a different set of features. In those cases
+separate widgets and routes arrays implementing the case-specific features
+can be registered programmatically by calling snd_soc_dapm_new_controls()
+and snd_soc_dapm_add_routes().
Codec/DSP Widget Interconnections
--
2.34.1
