Add support for reading the flow sensor value on the Aquacomputer Octo. Implemented by David Flemstrom [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95 Originally-from: David Flemstrom <david.flemstrom@xxxxxxxxx> Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx> --- Documentation/hwmon/aquacomputer_d5next.rst | 8 ++--- drivers/hwmon/aquacomputer_d5next.c | 34 +++++++++++++-------- 2 files changed, 25 insertions(+), 17 deletions(-) diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index cb073c79479c..f84b6a5e4373 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -45,9 +45,9 @@ seems to require sending it a complete configuration. That includes addressable RGB LEDs, for which there is no standard sysfs interface. Thus, that task is better suited for userspace tools. -The Octo exposes four physical and sixteen virtual temperature sensors, as well as -eight PWM controllable fans, along with their speed (in RPM), power, voltage and -current. +The Octo exposes four physical and sixteen virtual temperature sensors, a flow sensor +as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage +and current. The Quadro exposes four physical and sixteen virtual temperature sensors, a flow sensor and four PWM controllable fans, along with their speed (in RPM), power, @@ -95,7 +95,7 @@ Sysfs entries ================ ============================================================== temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius) temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius) -fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h) +fan[1-9]_input Pump/fan speed (in RPM) / Flow speed (in dL/h) fan1_min Minimal fan speed (in RPM) fan1_max Maximal fan speed (in RPM) fan1_target Target fan speed (in RPM) diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c index 2efe97f8d003..166044e01921 100644 --- a/drivers/hwmon/aquacomputer_d5next.c +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -202,12 +202,14 @@ static u16 aquastreamult_sensor_fan_offsets[] = { AQUASTREAMULT_FAN_OFFSET }; #define OCTO_NUM_FANS 8 #define OCTO_NUM_SENSORS 4 #define OCTO_NUM_VIRTUAL_SENSORS 16 +#define OCTO_NUM_FLOW_SENSORS 1 #define OCTO_CTRL_REPORT_SIZE 0x65F /* Sensor report offsets for the Octo */ #define OCTO_POWER_CYCLES 0x18 #define OCTO_SENSOR_START 0x3D #define OCTO_VIRTUAL_SENSORS_START 0x45 +#define OCTO_FLOW_SENSOR_OFFSET 0x7B static u16 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 }; /* Control report offsets for the Octo */ @@ -363,18 +365,6 @@ static const char *const label_aquaero_calc_temp_sensors[] = { "Calc. virtual sensor 4" }; -/* Labels for Octo and Quadro (except speed) */ -static const char *const label_fan_speed[] = { - "Fan 1 speed", - "Fan 2 speed", - "Fan 3 speed", - "Fan 4 speed", - "Fan 5 speed", - "Fan 6 speed", - "Fan 7 speed", - "Fan 8 speed" -}; - static const char *const label_fan_power[] = { "Fan 1 power", "Fan 2 power", @@ -408,6 +398,19 @@ static const char *const label_fan_current[] = { "Fan 8 current" }; +/* Labels for Octo fan speeds */ +static const char *const label_octo_speeds[] = { + "Fan 1 speed", + "Fan 2 speed", + "Fan 3 speed", + "Fan 4 speed", + "Fan 5 speed", + "Fan 6 speed", + "Fan 7 speed", + "Fan 8 speed", + "Flow speed [dL/h]", +}; + /* Labels for Quadro fan speeds */ static const char *const label_quadro_speeds[] = { "Fan 1 speed", @@ -844,6 +847,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3 return 0444; break; case aquaero: + case octo: case quadro: case highflow: /* Special case to support flow sensors */ @@ -1289,6 +1293,7 @@ static const struct hwmon_channel_info * const aqc_info[] = { HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_PULSES, HWMON_F_INPUT | HWMON_F_LABEL, HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, HWMON_F_INPUT | HWMON_F_LABEL), HWMON_CHANNEL_INFO(power, HWMON_P_INPUT | HWMON_P_LABEL, @@ -1658,6 +1663,9 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->temp_sensor_start_offset = OCTO_SENSOR_START; priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS; priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START; + priv->num_flow_sensors = OCTO_NUM_FLOW_SENSORS; + priv->flow_sensors_start_offset = OCTO_FLOW_SENSOR_OFFSET; + priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET; priv->buffer_size = OCTO_CTRL_REPORT_SIZE; @@ -1667,7 +1675,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->temp_label = label_temp_sensors; priv->virtual_temp_label = label_virtual_temp_sensors; - priv->speed_label = label_fan_speed; + priv->speed_label = label_octo_speeds; priv->power_label = label_fan_power; priv->voltage_label = label_fan_voltage; priv->current_label = label_fan_current; -- 2.44.0
