From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
Moved SFI specific parsing/handling code to intel_mid_sfi.c. This will enable
us to reuse our intel-mid code for platforms that supports firmware interfaces
other than SFI (like ACPI).
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
Signed-off-by: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/intel-mid.h | 1 +
arch/x86/platform/intel-mid/Makefile | 5 +-
arch/x86/platform/intel-mid/intel-mid.c | 450 -------------------------
arch/x86/platform/intel-mid/intel_mid_sfi.c | 485 +++++++++++++++++++++++++++
4 files changed, 489 insertions(+), 452 deletions(-)
create mode 100644 arch/x86/platform/intel-mid/intel_mid_sfi.c
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index afc282a..358e0d2 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -18,6 +18,7 @@ extern int intel_mid_pci_init(void);
extern int get_gpio_by_name(const char *name);
extern void intel_scu_device_register(struct platform_device *pdev);
extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
extern int sfi_mrtc_num;
extern struct sfi_rtc_table_entry sfi_mrtc_array[];
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index 36323ee..9a6b6c3 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,8 +1,9 @@
obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o
obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
-
+# SFI specific code
+obj-$(CONFIG_SFI) += intel_mid_sfi.o
# BOARD files
obj-$(CONFIG_X86_INTEL_MID) += board.o
# platform configuration for board devices
-obj-y += device_libs/
\ No newline at end of file
+obj-y += device_libs/
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 0ac2bd6..a08541a 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -18,19 +18,9 @@
#include <linux/interrupt.h>
#include <linux/scatterlist.h>
#include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/notifier.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/gpio.h>
-#include <linux/i2c/tc35876x.h>
#include <asm/setup.h>
#include <asm/mpspec_def.h>
@@ -69,17 +59,9 @@
enum intel_mid_timer_options intel_mid_timer_options;
-static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
-static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
enum intel_mid_cpu_type __intel_mid_cpu_chip;
EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
-int sfi_mtimer_num;
-
-struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
-EXPORT_SYMBOL_GPL(sfi_mrtc_array);
-int sfi_mrtc_num;
-
static void intel_mid_power_off(void)
{
}
@@ -89,114 +71,6 @@ static void intel_mid_reboot(void)
intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
}
-/* parse all the mtimer info to a static mtimer array */
-static int __init sfi_parse_mtmr(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_timer_table_entry *pentry;
- struct mpc_intsrc mp_irq;
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mtimer_num) {
- sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_timer_table_entry);
- pentry = (struct sfi_timer_table_entry *) sb->pentry;
- totallen = sfi_mtimer_num * sizeof(*pentry);
- memcpy(sfi_mtimer_array, pentry, totallen);
- }
-
- pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
- pentry = sfi_mtimer_array;
- for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
- pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
- " irq = %d\n", totallen, (u32)pentry->phys_addr,
- pentry->freq_hz, pentry->irq);
- if (!pentry->irq)
- continue;
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
- mp_irq.irqflag = 5;
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- }
-
- return 0;
-}
-
-struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
-{
- int i;
- if (hint < sfi_mtimer_num) {
- if (!sfi_mtimer_usage[hint]) {
- pr_debug("hint taken for timer %d irq %d\n",
- hint, sfi_mtimer_array[hint].irq);
- sfi_mtimer_usage[hint] = 1;
- return &sfi_mtimer_array[hint];
- }
- }
- /* take the first timer available */
- for (i = 0; i < sfi_mtimer_num;) {
- if (!sfi_mtimer_usage[i]) {
- sfi_mtimer_usage[i] = 1;
- return &sfi_mtimer_array[i];
- }
- i++;
- }
- return NULL;
-}
-
-void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
-{
- int i;
- for (i = 0; i < sfi_mtimer_num;) {
- if (mtmr->irq == sfi_mtimer_array[i].irq) {
- sfi_mtimer_usage[i] = 0;
- return;
- }
- i++;
- }
-}
-
-/* parse all the mrtc info to a global mrtc array */
-int __init sfi_parse_mrtc(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_rtc_table_entry *pentry;
- struct mpc_intsrc mp_irq;
-
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mrtc_num) {
- sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_rtc_table_entry);
- pentry = (struct sfi_rtc_table_entry *)sb->pentry;
- totallen = sfi_mrtc_num * sizeof(*pentry);
- memcpy(sfi_mrtc_array, pentry, totallen);
- }
-
- pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
- pentry = sfi_mrtc_array;
- for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
- pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
- totallen, (u32)pentry->phys_addr, pentry->irq);
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = 0xf; /* level trigger and active low */
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- }
- return 0;
-}
-
static unsigned long __init intel_mid_calibrate_tsc(void)
{
unsigned long fast_calibrate;
@@ -337,327 +211,3 @@ static inline int __init setup_x86_intel_mid_timer(char *arg)
return 0;
}
__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
-
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static struct sfi_gpio_table_entry *gpio_table;
-static int gpio_num_entry;
-
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_gpio_table_entry *pentry;
- int num, i;
-
- if (gpio_table)
- return 0;
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
- pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
- gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
- if (!gpio_table)
- return -1;
- memcpy(gpio_table, pentry, num * sizeof(*pentry));
- gpio_num_entry = num;
-
- pr_debug("GPIO pin info:\n");
- for (i = 0; i < num; i++, pentry++)
- pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
- " pin = %d\n", i,
- pentry->controller_name,
- pentry->pin_name,
- pentry->pin_no);
- return 0;
-}
-
-int get_gpio_by_name(const char *name)
-{
- struct sfi_gpio_table_entry *pentry = gpio_table;
- int i;
-
- if (!pentry)
- return -1;
- for (i = 0; i < gpio_num_entry; i++, pentry++) {
- if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
- return pentry->pin_no;
- }
- return -1;
-}
-
-#define MAX_IPCDEVS 24
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static int ipc_next_dev;
-
-#define MAX_SCU_SPI 24
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static int spi_next_dev;
-
-#define MAX_SCU_I2C 24
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static int i2c_bus[MAX_SCU_I2C];
-static int i2c_next_dev;
-
-void __init intel_scu_device_register(struct platform_device *pdev)
-{
- if (ipc_next_dev == MAX_IPCDEVS)
- pr_err("too many SCU IPC devices");
- else
- ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
- struct spi_board_info *new_dev;
-
- if (spi_next_dev == MAX_SCU_SPI) {
- pr_err("too many SCU SPI devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed spi dev %s\n",
- sdev->modalias);
- return;
- }
- memcpy(new_dev, sdev, sizeof(*sdev));
-
- spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
- struct i2c_board_info *idev)
-{
- struct i2c_board_info *new_dev;
-
- if (i2c_next_dev == MAX_SCU_I2C) {
- pr_err("too many SCU I2C devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed i2c dev %s\n",
- idev->type);
- return;
- }
- memcpy(new_dev, idev, sizeof(*idev));
-
- i2c_bus[i2c_next_dev] = bus;
- i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
- int i;
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_add(ipc_devs[i]);
-
- for (i = 0; i < spi_next_dev; i++)
- spi_register_board_info(spi_devs[i], 1);
-
- for (i = 0; i < i2c_next_dev; i++) {
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- adapter = i2c_get_adapter(i2c_bus[i]);
- if (adapter) {
- client = i2c_new_device(adapter, i2c_devs[i]);
- if (!client)
- pr_err("can't create i2c device %s\n",
- i2c_devs[i]->type);
- } else
- i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
- }
- intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
- int i;
-
- intel_scu_notifier_post(SCU_DOWN, NULL);
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
- /* Single threaded */
- static struct resource __initdata res = {
- .name = "IRQ",
- .flags = IORESOURCE_IRQ,
- };
- res.start = irq;
- platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct platform_device *pdev;
- void *pdata = NULL;
-
- pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
- pentry->name, pentry->irq);
- pdata = dev->get_platform_data(pentry);
-
- pdev = platform_device_alloc(pentry->name, 0);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- return;
- }
- install_irq_resource(pdev, pentry->irq);
-
- pdev->dev.platform_data = pdata;
- platform_device_add(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct spi_board_info spi_info;
- void *pdata = NULL;
-
- memset(&spi_info, 0, sizeof(spi_info));
- strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- spi_info.bus_num = pentry->host_num;
- spi_info.chip_select = pentry->addr;
- spi_info.max_speed_hz = pentry->max_freq;
- pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
- spi_info.bus_num,
- spi_info.modalias,
- spi_info.irq,
- spi_info.max_speed_hz,
- spi_info.chip_select);
-
- pdata = dev->get_platform_data(&spi_info);
-
- spi_info.platform_data = pdata;
- if (dev->delay)
- intel_scu_spi_device_register(&spi_info);
- else
- spi_register_board_info(&spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct i2c_board_info i2c_info;
- void *pdata = NULL;
-
- memset(&i2c_info, 0, sizeof(i2c_info));
- strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- i2c_info.addr = pentry->addr;
- pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
- pentry->host_num,
- i2c_info.type,
- i2c_info.irq,
- i2c_info.addr);
- pdata = dev->get_platform_data(&i2c_info);
- i2c_info.platform_data = pdata;
-
- if (dev->delay)
- intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
- else
- i2c_register_board_info(pentry->host_num, &i2c_info, 1);
-}
-
-static struct devs_id __init *get_device_id(u8 type, char *name)
-{
- struct devs_id *dev = device_ids;
-
- if (device_ids == NULL)
- return NULL;
-
- while (dev->name[0]) {
- if (dev->type == type &&
- !strncmp(dev->name, name, SFI_NAME_LEN)) {
- return dev;
- }
- dev++;
- }
-
- return NULL;
-}
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_device_table_entry *pentry;
- struct devs_id *dev = NULL;
- int num, i;
- int ioapic;
- struct io_apic_irq_attr irq_attr;
-
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
- pentry = (struct sfi_device_table_entry *)sb->pentry;
-
- for (i = 0; i < num; i++, pentry++) {
- int irq = pentry->irq;
-
- if (irq != (u8)0xff) { /* native RTE case */
- /* these SPI2 devices are not exposed to system as PCI
- * devices, but they have separate RTE entry in IOAPIC
- * so we have to enable them one by one here
- */
- ioapic = mp_find_ioapic(irq);
- irq_attr.ioapic = ioapic;
- irq_attr.ioapic_pin = irq;
- irq_attr.trigger = 1;
- irq_attr.polarity = 1;
- io_apic_set_pci_routing(NULL, irq, &irq_attr);
- } else
- irq = 0; /* No irq */
-
- dev = get_device_id(pentry->type, pentry->name);
-
- if ((dev == NULL) || (dev->get_platform_data == NULL))
- continue;
-
- if (dev->device_handler) {
- dev->device_handler(pentry, dev);
- } else {
- switch (pentry->type) {
- case SFI_DEV_TYPE_IPC:
- sfi_handle_ipc_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SPI:
- sfi_handle_spi_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_I2C:
- sfi_handle_i2c_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_UART:
- case SFI_DEV_TYPE_HSI:
- default:
- break;
- }
- }
- }
- return 0;
-}
-
-static int __init intel_mid_platform_init(void)
-{
- sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
- sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
- return 0;
-}
-arch_initcall(intel_mid_platform_init);
diff --git a/arch/x86/platform/intel-mid/intel_mid_sfi.c b/arch/x86/platform/intel-mid/intel_mid_sfi.c
new file mode 100644
index 0000000..2f8196d
--- /dev/null
+++ b/arch/x86/platform/intel-mid/intel_mid_sfi.c
@@ -0,0 +1,485 @@
+/*
+ * intel_mid_sfi.c: Intel MID SFI initialization code
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/blkdev.h>
+
+#include <asm/setup.h>
+#include <asm/mpspec_def.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/apb_timer.h>
+#include <asm/reboot.h>
+#include "intel_mid_weak_decls.h"
+
+#define SFI_SIG_OEM0 "OEM0"
+#define MAX_IPCDEVS 24
+#define MAX_SCU_SPI 24
+#define MAX_SCU_I2C 24
+
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static struct sfi_gpio_table_entry *gpio_table;
+static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+static int ipc_next_dev;
+static int spi_next_dev;
+static int i2c_next_dev;
+static int i2c_bus[MAX_SCU_I2C];
+static int gpio_num_entry;
+static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
+int sfi_mrtc_num;
+int sfi_mtimer_num;
+
+struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
+EXPORT_SYMBOL_GPL(sfi_mrtc_array);
+
+struct blocking_notifier_head intel_scu_notifier =
+ BLOCKING_NOTIFIER_INIT(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
+/* parse all the mtimer info to a static mtimer array */
+int __init sfi_parse_mtmr(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_timer_table_entry *pentry;
+ struct mpc_intsrc mp_irq;
+ int totallen;
+
+ sb = (struct sfi_table_simple *)table;
+ if (!sfi_mtimer_num) {
+ sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
+ struct sfi_timer_table_entry);
+ pentry = (struct sfi_timer_table_entry *) sb->pentry;
+ totallen = sfi_mtimer_num * sizeof(*pentry);
+ memcpy(sfi_mtimer_array, pentry, totallen);
+ }
+
+ pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
+ pentry = sfi_mtimer_array;
+ for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
+ pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n",
+ totallen, (u32)pentry->phys_addr,
+ pentry->freq_hz, pentry->irq);
+ if (!pentry->irq)
+ continue;
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+ mp_irq.irqflag = 5;
+ mp_irq.srcbus = MP_BUS_ISA;
+ mp_irq.srcbusirq = pentry->irq; /* IRQ */
+ mp_irq.dstapic = MP_APIC_ALL;
+ mp_irq.dstirq = pentry->irq;
+ mp_save_irq(&mp_irq);
+ }
+
+ return 0;
+}
+
+struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
+{
+ int i;
+ if (hint < sfi_mtimer_num) {
+ if (!sfi_mtimer_usage[hint]) {
+ pr_debug("hint taken for timer %d irq %d\n",
+ hint, sfi_mtimer_array[hint].irq);
+ sfi_mtimer_usage[hint] = 1;
+ return &sfi_mtimer_array[hint];
+ }
+ }
+ /* take the first timer available */
+ for (i = 0; i < sfi_mtimer_num;) {
+ if (!sfi_mtimer_usage[i]) {
+ sfi_mtimer_usage[i] = 1;
+ return &sfi_mtimer_array[i];
+ }
+ i++;
+ }
+ return NULL;
+}
+
+void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
+{
+ int i;
+ for (i = 0; i < sfi_mtimer_num;) {
+ if (mtmr->irq == sfi_mtimer_array[i].irq) {
+ sfi_mtimer_usage[i] = 0;
+ return;
+ }
+ i++;
+ }
+}
+
+/* parse all the mrtc info to a global mrtc array */
+int __init sfi_parse_mrtc(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_rtc_table_entry *pentry;
+ struct mpc_intsrc mp_irq;
+
+ int totallen;
+
+ sb = (struct sfi_table_simple *)table;
+ if (!sfi_mrtc_num) {
+ sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
+ struct sfi_rtc_table_entry);
+ pentry = (struct sfi_rtc_table_entry *)sb->pentry;
+ totallen = sfi_mrtc_num * sizeof(*pentry);
+ memcpy(sfi_mrtc_array, pentry, totallen);
+ }
+
+ pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
+ pentry = sfi_mrtc_array;
+ for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
+ pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
+ totallen, (u32)pentry->phys_addr, pentry->irq);
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = 0xf; /* level trigger and active low */
+ mp_irq.srcbus = MP_BUS_ISA;
+ mp_irq.srcbusirq = pentry->irq; /* IRQ */
+ mp_irq.dstapic = MP_APIC_ALL;
+ mp_irq.dstirq = pentry->irq;
+ mp_save_irq(&mp_irq);
+ }
+ return 0;
+}
+
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_gpio_table_entry *pentry;
+ int num, i;
+
+ if (gpio_table)
+ return 0;
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+ pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+ gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+ if (!gpio_table)
+ return -1;
+ memcpy(gpio_table, pentry, num * sizeof(*pentry));
+ gpio_num_entry = num;
+
+ pr_debug("GPIO pin info:\n");
+ for (i = 0; i < num; i++, pentry++)
+ pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+ " pin = %d\n", i,
+ pentry->controller_name,
+ pentry->pin_name,
+ pentry->pin_no);
+ return 0;
+}
+
+int get_gpio_by_name(const char *name)
+{
+ struct sfi_gpio_table_entry *pentry = gpio_table;
+ int i;
+
+ if (!pentry)
+ return -1;
+ for (i = 0; i < gpio_num_entry; i++, pentry++) {
+ if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+ return pentry->pin_no;
+ }
+ return -1;
+}
+
+void __init intel_scu_device_register(struct platform_device *pdev)
+{
+ if (ipc_next_dev == MAX_IPCDEVS)
+ pr_err("too many SCU IPC devices");
+ else
+ ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+ struct spi_board_info *new_dev;
+
+ if (spi_next_dev == MAX_SCU_SPI) {
+ pr_err("too many SCU SPI devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed spi dev %s\n",
+ sdev->modalias);
+ return;
+ }
+ memcpy(new_dev, sdev, sizeof(*sdev));
+
+ spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+ struct i2c_board_info *idev)
+{
+ struct i2c_board_info *new_dev;
+
+ if (i2c_next_dev == MAX_SCU_I2C) {
+ pr_err("too many SCU I2C devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed i2c dev %s\n",
+ idev->type);
+ return;
+ }
+ memcpy(new_dev, idev, sizeof(*idev));
+
+ i2c_bus[i2c_next_dev] = bus;
+ i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+ int i;
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_add(ipc_devs[i]);
+
+ for (i = 0; i < spi_next_dev; i++)
+ spi_register_board_info(spi_devs[i], 1);
+
+ for (i = 0; i < i2c_next_dev; i++) {
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ adapter = i2c_get_adapter(i2c_bus[i]);
+ if (adapter) {
+ client = i2c_new_device(adapter, i2c_devs[i]);
+ if (!client)
+ pr_err("can't create i2c device %s\n",
+ i2c_devs[i]->type);
+ } else
+ i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+ }
+ intel_scu_notifier_post(SCU_AVAILABLE, NULL);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+ int i;
+
+ intel_scu_notifier_post(SCU_DOWN, NULL);
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+ /* Single threaded */
+ static struct resource res __initdata = {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ };
+ res.start = irq;
+ platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct platform_device *pdev;
+ void *pdata = NULL;
+
+ pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+ pentry->name, pentry->irq);
+ pdata = dev->get_platform_data(pentry);
+
+ pdev = platform_device_alloc(pentry->name, 0);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ pentry->name);
+ return;
+ }
+ install_irq_resource(pdev, pentry->irq);
+
+ pdev->dev.platform_data = pdata;
+ platform_device_add(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct spi_board_info spi_info;
+ void *pdata = NULL;
+
+ memset(&spi_info, 0, sizeof(spi_info));
+ strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+ spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+ spi_info.bus_num = pentry->host_num;
+ spi_info.chip_select = pentry->addr;
+ spi_info.max_speed_hz = pentry->max_freq;
+ pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
+ spi_info.bus_num,
+ spi_info.modalias,
+ spi_info.irq,
+ spi_info.max_speed_hz,
+ spi_info.chip_select);
+
+ pdata = dev->get_platform_data(&spi_info);
+
+ spi_info.platform_data = pdata;
+ if (dev->delay)
+ intel_scu_spi_device_register(&spi_info);
+ else
+ spi_register_board_info(&spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct i2c_board_info i2c_info;
+ void *pdata = NULL;
+
+ memset(&i2c_info, 0, sizeof(i2c_info));
+ strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+ i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+ i2c_info.addr = pentry->addr;
+ pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
+ pentry->host_num,
+ i2c_info.type,
+ i2c_info.irq,
+ i2c_info.addr);
+ pdata = dev->get_platform_data(&i2c_info);
+ i2c_info.platform_data = pdata;
+
+ if (dev->delay)
+ intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
+ else
+ i2c_register_board_info(pentry->host_num, &i2c_info, 1);
+}
+
+static struct devs_id __init *get_device_id(u8 type, char *name)
+{
+ struct devs_id *dev = device_ids;
+
+ if (device_ids == NULL)
+ return NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == type &&
+ !strncmp(dev->name, name, SFI_NAME_LEN)) {
+ return dev;
+ }
+ dev++;
+ }
+
+ return NULL;
+}
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_device_table_entry *pentry;
+ struct devs_id *dev = NULL;
+ int num, i;
+ int ioapic;
+ struct io_apic_irq_attr irq_attr;
+
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+ pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+ for (i = 0; i < num; i++, pentry++) {
+ int irq = pentry->irq;
+
+ if (irq != (u8)0xff) { /* native RTE case */
+ /* these SPI2 devices are not exposed to system as PCI
+ * devices, but they have separate RTE entry in IOAPIC
+ * so we have to enable them one by one here
+ */
+ ioapic = mp_find_ioapic(irq);
+ irq_attr.ioapic = ioapic;
+ irq_attr.ioapic_pin = irq;
+ irq_attr.trigger = 1;
+ irq_attr.polarity = 1;
+ io_apic_set_pci_routing(NULL, irq, &irq_attr);
+ } else
+ irq = 0; /* No irq */
+
+ dev = get_device_id(pentry->type, pentry->name);
+
+ if ((dev == NULL) || (dev->get_platform_data == NULL))
+ continue;
+
+ if (dev->device_handler) {
+ dev->device_handler(pentry, dev);
+ } else {
+ switch (pentry->type) {
+ case SFI_DEV_TYPE_IPC:
+ sfi_handle_ipc_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_SPI:
+ sfi_handle_spi_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_I2C:
+ sfi_handle_i2c_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_UART:
+ case SFI_DEV_TYPE_HSI:
+ default:
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int __init intel_mid_platform_init(void)
+{
+ sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+ sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+ return 0;
+}
+arch_initcall(intel_mid_platform_init);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
