Hi Rob,
> Subject: Re: [PATCH v3 2/6] dt-bindings: firmware: add i.MX95 SCMI
> Extension protocol
>
> On Fri, Apr 12, 2024 at 06:47:08PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@xxxxxxx>
> >
> > Add i.MX SCMI Extension protocols bindings for:
> > - Battery Backed Module(BBM) Protocol
> > This contains persistent storage (GPR), an RTC, and the ON/OFF button.
> > The protocol can also provide access to similar functions implemented via
> > external board components.
> > - MISC Protocol.
> > This includes controls that are misc settings/actions that must be exposed
> > from the SM to agents. They are device specific and are usually define to
> > access bit fields in various mix block control modules, IOMUX_GPR, and
> other
> > GPR/CSR owned by the SM.
> >
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > ---
> > .../devicetree/bindings/firmware/arm,scmi.yaml | 21 +++++++++++++
> > .../bindings/firmware/nxp,imx95-scmi.yaml | 36
> ++++++++++++++++++++++
> > 2 files changed, 57 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > index 93fb7d05f849..fa2cc910c485 100644
> > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > @@ -247,6 +247,27 @@ properties:
> > reg:
> > const: 0x18
> >
> > + protocol@81:
> > + $ref: '#/$defs/protocol-node'
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + reg:
> > + const: 0x81
> > +
> > + protocol@84:
> > + type: object
> > + anyOf:
> > + - allOf:
> > + - $ref: /schemas/firmware/nxp,imx95-scmi.yaml
> > + - $ref: '#/$defs/protocol-node'
>
> If you put the ref under the protocol node, then it's 1 schema file per protocol
> per vendor. Also, we then have to list every possible protocol node here, and
> every one listed here will be valid for every vendor.
> What we discussed is putting the list of vendor protocol schemas at the top-
> level here and then the vendor schemas can list out all the protocol nodes.
>
> Also, move "$ref: '#/$defs/protocol-node'" to nxp,imx95-scmi.yaml.
In arm,scmi.yaml top level, add below:
+anyOf:
+ - $ref: /schemas/firmware/nxp,imx95-scmi.yaml
And also add a protocol node:
protocol@84:
$ref: '#/$defs/protocol-node'
properties:
reg:
const: 0x84
But here I not add unevaludatedProperties = false; otherwise the vendor
yaml new properties will not work.
In nxp,imx95-scmi.yaml:
properties:
protocol@84:
$ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
unevaluatedProperties: false
properties:
reg:
const: 0x84
nxp,wakeup-sources:
description:
Each entry consists of 2 integers, represents the source and electric signal edge
items:
items:
- description: the wakeup source
- description: the wakeup electric signal edge
minItems: 1
maxItems: 32
$ref: /schemas/types.yaml#/definitions/uint32-matrix
additionalProperties: true
Are the upper looks good to you?
>
> > +
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + reg:
> > + const: 0x84
> > +
> > additionalProperties: false
> >
> > $defs:
> > diff --git
> > a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
> > b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
> > new file mode 100644
> > index 000000000000..b84c4a53b78a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
> > @@ -0,0 +1,36 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2024
> > +NXP %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fschemas%2Ffirmware%2Fnxp%2Cimx95-
> scmi.yaml%23&data=05%7C
> >
> +02%7Cpeng.fan%40nxp.com%7Ca73ba3e8c48044f31aed08dc5af538e8%7C
> 686ea1d3
> >
> +bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638485256510784219%7CUnk
> nown%7CTWF
> >
> +pbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJX
> VCI6
> >
> +Mn0%3D%7C0%7C%7C%7C&sdata=Ml5yAdb4A0Bmg%2BVKroJTJsE9dAF6B
> h2mbJzgyxB4w
> > +xs%3D&reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fmeta-
> schemas%2Fcore.yaml%23&data=05%7C02%7Cpeng.fan%40nx
> >
> +p.com%7Ca73ba3e8c48044f31aed08dc5af538e8%7C686ea1d3bc2b4c6fa9
> 2cd99c5c
> >
> +301635%7C0%7C0%7C638485256510797603%7CUnknown%7CTWFpbGZs
> b3d8eyJWIjoiM
> >
> +C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7
> C%7C%7
> >
> +C&sdata=6%2FsoexEJRrjL3DaXX5wwtjd1ZSN7nqmh0YjAQEmH5Ow%3D&res
> erved=0
> > +
> > +title: i.MX95 System Control and Management Interface(SCMI) Vendor
> > +Protocols Extension
> > +
> > +maintainers:
> > + - Peng Fan <peng.fan@xxxxxxx>
> > +
> > +properties:
> > + nxp,wakeup-sources:
> > + description:
> > + Each entry consists of 2 integers, represents the source and electric
> signal edge
> > + items:
> > + items:
> > + - description: the wakeup source
> > + - description: the wakeup electric signal edge
> > + minItems: 1
> > + maxItems: 32
> > + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +
> > +if:
> > + properties:
> > + reg:
> > + const: 0x84
>
> This schema is only included from protocol@84 node, so how can this be
> false?
Just in case adding other ID in this file in future. This is no need with
per file containing all the nxp protocols.
Thanks,
Peng.
>
> > +then:
> > + properties:
> > + nxp,wakeup-sources: true
> > +else:
> > + properties:
> > + nxp,wakeup-sources: false
> > +
> > +additionalProperties: true
> >
> > --
> > 2.37.1
> >
