Some operations cannot be performed during the firmware flashing process. For example: - Port must be down during the whole flashing process to avoid packet loss while committing reset for example. - Writing to EEPROM interrupts the flashing process, so operations like ethtool dump, module reset, get and set power mode should be vetoed. - Split port firmware flashing should be vetoed. - Flashing firmware on a device which is already in a flashing process should be forbidden. Use the 'module_fw_flashing_in_progress' flag introduced in a previous patch to veto those operations and prevent interruptions while preforming module firmware flash. Signed-off-by: Danielle Ratson <danieller@xxxxxxxxxx> --- net/ethtool/eeprom.c | 6 ++++++ net/ethtool/ioctl.c | 12 ++++++++++++ net/ethtool/module.c | 29 +++++++++++++++++++++++++++++ net/ethtool/netlink.c | 30 +++++++++++++++++++++++++++++- 4 files changed, 76 insertions(+), 1 deletion(-) diff --git a/net/ethtool/eeprom.c b/net/ethtool/eeprom.c index 6209c3a9c8f7..f36811b3ecf1 100644 --- a/net/ethtool/eeprom.c +++ b/net/ethtool/eeprom.c @@ -91,6 +91,12 @@ static int get_module_eeprom_by_page(struct net_device *dev, { const struct ethtool_ops *ops = dev->ethtool_ops; + if (dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(extack, + "Module firmware flashing is in progress"); + return -EBUSY; + } + if (dev->sfp_bus) return sfp_get_module_eeprom_by_page(dev->sfp_bus, page_data, extack); diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c index 317308bdbda9..ff9df2ee083a 100644 --- a/net/ethtool/ioctl.c +++ b/net/ethtool/ioctl.c @@ -658,6 +658,9 @@ static int ethtool_get_settings(struct net_device *dev, void __user *useraddr) if (!dev->ethtool_ops->get_link_ksettings) return -EOPNOTSUPP; + if (dev->module_fw_flash_in_progress) + return -EBUSY; + memset(&link_ksettings, 0, sizeof(link_ksettings)); err = dev->ethtool_ops->get_link_ksettings(dev, &link_ksettings); if (err < 0) @@ -1449,6 +1452,9 @@ static int ethtool_reset(struct net_device *dev, char __user *useraddr) if (!dev->ethtool_ops->reset) return -EOPNOTSUPP; + if (dev->module_fw_flash_in_progress) + return -EBUSY; + if (copy_from_user(&reset, useraddr, sizeof(reset))) return -EFAULT; @@ -2467,6 +2473,9 @@ int ethtool_get_module_info_call(struct net_device *dev, const struct ethtool_ops *ops = dev->ethtool_ops; struct phy_device *phydev = dev->phydev; + if (dev->module_fw_flash_in_progress) + return -EBUSY; + if (dev->sfp_bus) return sfp_get_module_info(dev->sfp_bus, modinfo); @@ -2504,6 +2513,9 @@ int ethtool_get_module_eeprom_call(struct net_device *dev, const struct ethtool_ops *ops = dev->ethtool_ops; struct phy_device *phydev = dev->phydev; + if (dev->module_fw_flash_in_progress) + return -EBUSY; + if (dev->sfp_bus) return sfp_get_module_eeprom(dev->sfp_bus, ee, data); diff --git a/net/ethtool/module.c b/net/ethtool/module.c index ea3b4db9847a..33d5b39a1c60 100644 --- a/net/ethtool/module.c +++ b/net/ethtool/module.c @@ -3,6 +3,7 @@ #include <linux/ethtool.h> #include <linux/firmware.h> #include <linux/sfp.h> +#include <net/devlink.h> #include "netlink.h" #include "common.h" @@ -36,6 +37,12 @@ static int module_get_power_mode(struct net_device *dev, if (!ops->get_module_power_mode) return 0; + if (dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(extack, + "Module firmware flashing is in progress"); + return -EBUSY; + } + return ops->get_module_power_mode(dev, &data->power, extack); } @@ -112,6 +119,12 @@ ethnl_set_module_validate(struct ethnl_req_info *req_info, if (!tb[ETHTOOL_A_MODULE_POWER_MODE_POLICY]) return 0; + if (req_info->dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(info->extack, + "Module firmware flashing is in progress"); + return -EBUSY; + } + if (!ops->get_module_power_mode || !ops->set_module_power_mode) { NL_SET_ERR_MSG_ATTR(info->extack, tb[ETHTOOL_A_MODULE_POWER_MODE_POLICY], @@ -219,6 +232,7 @@ static int module_flash_fw_work_init(struct ethtool_module_fw_flash *module_fw, static int __module_flash_fw_schedule(struct net_device *dev, struct netlink_ext_ack *extack) { + struct devlink_port *devlink_port = dev->devlink_port; const struct ethtool_ops *ops = dev->ethtool_ops; if (!ops->set_module_eeprom_by_page || @@ -234,6 +248,21 @@ static int __module_flash_fw_schedule(struct net_device *dev, return -EOPNOTSUPP; } + if (dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(extack, "Module firmware flashing already in progress"); + return -EBUSY; + } + + if (dev->flags & IFF_UP) { + NL_SET_ERR_MSG(extack, "Netdevice is up, so flashing is not permitted"); + return -EBUSY; + } + + if (devlink_port && devlink_port->attrs.split) { + NL_SET_ERR_MSG(extack, "Can't perform firmware flashing on a split port"); + return -EOPNOTSUPP; + } + return 0; } diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c index dc3e208f5a75..00406ce3f7ac 100644 --- a/net/ethtool/netlink.c +++ b/net/ethtool/netlink.c @@ -1150,6 +1150,29 @@ static struct genl_family ethtool_genl_family __ro_after_init = { .n_mcgrps = ARRAY_SIZE(ethtool_nl_mcgrps), }; +static int module_netdev_pre_up_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct net_device *dev = netdev_notifier_info_to_dev(ptr); + struct netdev_notifier_info *info = ptr; + struct netlink_ext_ack *extack; + + extack = netdev_notifier_info_to_extack(info); + + if (event == NETDEV_PRE_UP) { + if (dev->module_fw_flash_in_progress) { + NL_SET_ERR_MSG(extack, "Can't set port up while flashing module firmware"); + return NOTIFY_BAD; + } + } + + return NOTIFY_DONE; +} + +static struct notifier_block ethtool_module_netdev_pre_up_notifier = { + .notifier_call = module_netdev_pre_up_event, +}; + /* module setup */ static int __init ethnl_init(void) @@ -1162,7 +1185,12 @@ static int __init ethnl_init(void) ethnl_ok = true; ret = register_netdevice_notifier(ðnl_netdev_notifier); - WARN(ret < 0, "ethtool: net device notifier registration failed"); + if (WARN(ret < 0, "ethtool: net device notifier registration failed")) + return ret; + + ret = register_netdevice_notifier(ðtool_module_netdev_pre_up_notifier); + WARN(ret < 0, "ethtool: net device port up notifier registration failed"); + return ret; } -- 2.43.0