CMIS compliant modules such as QSFP-DD might be running a firmware that
can be updated in a vendor-neutral way by exchanging messages between
the host and the module as described in section 7.3.1 of revision 5.2 of
the CMIS standard.
Add a pair of new ethtool messages that allow:
* User space to trigger firmware update of transceiver modules
* The kernel to notify user space about the progress of the process
The user interface is designed to be asynchronous in order to avoid
RTNL being held for too long and to allow several modules to be
updated simultaneously. The interface is designed with CMIS compliant
modules in mind, but kept generic enough to accommodate future use
cases, if these arise.
Signed-off-by: Danielle Ratson <danieller@xxxxxxxxxx>
---
Documentation/netlink/specs/ethtool.yaml | 63 ++++++++++++++++++++
Documentation/networking/ethtool-netlink.rst | 62 +++++++++++++++++++
include/uapi/linux/ethtool.h | 18 ++++++
include/uapi/linux/ethtool_netlink.h | 20 +++++++
4 files changed, 163 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 197208f419dc..24b2c8dd86df 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -16,6 +16,11 @@ definitions:
name: stringset
type: enum
entries: []
+ -
+ name: module-fw-flash-status
+ type: enum
+ entries: [ started, in_progress, completed, error ]
+
attribute-sets:
-
@@ -942,6 +947,39 @@ attribute-sets:
-
name: burst-tmr
type: u32
+ -
+ name: module-fw-flash
+ attributes:
+ -
+ name: header
+ type: nest
+ nested-attributes: header
+ -
+ name: file-name
+ type: string
+ -
+ name: password
+ type: u32
+ -
+ name: module-fw-flash-ntf
+ attributes:
+ -
+ name: header
+ type: nest
+ nested-attributes: header
+ -
+ name: status
+ type: u32
+ enum: module-fw-flash-status
+ -
+ name: status-msg
+ type: string
+ -
+ name: done
+ type: u64
+ -
+ name: total
+ type: u64
operations:
enum-model: directional
@@ -1693,3 +1731,28 @@ operations:
name: mm-ntf
doc: Notification for change in MAC Merge configuration.
notify: mm-get
+ -
+ name: module-fw-flash-act
+ doc: Flash transceiver module firmware.
+
+ attribute-set: module-fw-flash
+
+ do:
+ request:
+ attributes:
+ - header
+ - file-name
+ - password
+ -
+ name: module-fw-flash-ntf
+ doc: Notification for firmware flashing progress and status.
+
+ attribute-set: module-fw-flash-ntf
+
+ event:
+ attributes:
+ - header
+ - status
+ - status-msg
+ - done
+ - total
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index d583d9abf2f8..e73149c66620 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -228,6 +228,7 @@ Userspace to kernel:
``ETHTOOL_MSG_PLCA_GET_STATUS`` get PLCA RS status
``ETHTOOL_MSG_MM_GET`` get MAC merge layer state
``ETHTOOL_MSG_MM_SET`` set MAC merge layer parameters
+ ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT`` flash transceiver module firmware
===================================== =================================
Kernel to userspace:
@@ -274,6 +275,7 @@ Kernel to userspace:
``ETHTOOL_MSG_PLCA_GET_STATUS_REPLY`` PLCA RS status
``ETHTOOL_MSG_PLCA_NTF`` PLCA RS parameters
``ETHTOOL_MSG_MM_GET_REPLY`` MAC merge layer status
+ ``ETHTOOL_MSG_MODULE_FW_FLASH_NTF`` transceiver module flash updates
======================================== =================================
``GET`` requests are sent by userspace applications to retrieve device
@@ -2004,6 +2006,65 @@ The attributes are propagated to the driver through the following structure:
.. kernel-doc:: include/linux/ethtool.h
:identifiers: ethtool_mm_cfg
+MODULE_FW_FLASH_ACT
+===================
+
+Flashes transceiver module firmware.
+
+Request contents:
+
+ ======================================= ====== ===========================
+ ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` nested request header
+ ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` string firmware image file name
+ ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` u32 transceiver module password
+ ======================================= ====== ===========================
+
+The firmware update process is composed from three logical steps:
+
+1. Downloading a firmware image to the transceiver module and validating it.
+2. Running the firmware image.
+3. Committing the firmware image so that it is run upon reset.
+
+When flash command is given, those three steps are taken in that order.
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` attribute encodes the firmware
+image file name. The firmware image is downloaded to the transceiver module,
+validated, run and committed.
+
+The optional ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` attribute encodes a password
+that might be required as part of the transceiver module firmware update
+process.
+
+The firmware update process can take several minutes to complete. Therefore,
+during the update process notifications are emitted from the kernel to user
+space updating it about the status and progress.
+
+Notification contents:
+
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` | nested | reply header |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` | u32 | status |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` | string | status message |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` | u64 | progress |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL`` | u64 | total |
+ +---------------------------------------------------+--------+----------------+
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` attribute encodes the current status
+of the firmware update process. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_module_fw_flash_status
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` attribute encodes a status message
+string.
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` and ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL``
+attributes encode the completed and total amount of work, respectively.
+
Request translation
===================
@@ -2110,4 +2171,5 @@ are netlink only.
n/a ``ETHTOOL_MSG_PLCA_GET_STATUS``
n/a ``ETHTOOL_MSG_MM_GET``
n/a ``ETHTOOL_MSG_MM_SET``
+ n/a ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT``
=================================== =====================================
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 06ef6b78b7de..79041bdccd61 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -822,6 +822,24 @@ enum ethtool_mm_verify_status {
ETHTOOL_MM_VERIFY_STATUS_DISABLED,
};
+/**
+ * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has
+ * started.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process
+ * is in progress.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was
+ * completed successfully.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was
+ * stopped due to an error.
+ */
+enum ethtool_module_fw_flash_status {
+ ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1,
+ ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS,
+ ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED,
+ ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR,
+};
+
/**
* struct ethtool_gstrings - string set for data tagging
* @cmd: Command number = %ETHTOOL_GSTRINGS
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 3f89074aa06c..44e02533d01d 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -57,6 +57,7 @@ enum {
ETHTOOL_MSG_PLCA_GET_STATUS,
ETHTOOL_MSG_MM_GET,
ETHTOOL_MSG_MM_SET,
+ ETHTOOL_MSG_MODULE_FW_FLASH_ACT,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
@@ -109,6 +110,7 @@ enum {
ETHTOOL_MSG_PLCA_NTF,
ETHTOOL_MSG_MM_GET_REPLY,
ETHTOOL_MSG_MM_NTF,
+ ETHTOOL_MSG_MODULE_FW_FLASH_NTF,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
@@ -976,6 +978,24 @@ enum {
ETHTOOL_A_MM_MAX = (__ETHTOOL_A_MM_CNT - 1)
};
+/* MODULE_FW_FLASH */
+
+enum {
+ ETHTOOL_A_MODULE_FW_FLASH_UNSPEC,
+ ETHTOOL_A_MODULE_FW_FLASH_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME, /* string */
+ ETHTOOL_A_MODULE_FW_FLASH_PASSWORD, /* u32 */
+ ETHTOOL_A_MODULE_FW_FLASH_PAD,
+ ETHTOOL_A_MODULE_FW_FLASH_STATUS, /* u8 */
+ ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG, /* string */
+ ETHTOOL_A_MODULE_FW_FLASH_DONE, /* u64 */
+ ETHTOOL_A_MODULE_FW_FLASH_TOTAL, /* u64 */
+
+ /* add new constants above here */
+ __ETHTOOL_A_MODULE_FW_FLASH_CNT,
+ ETHTOOL_A_MODULE_FW_FLASH_MAX = (__ETHTOOL_A_MODULE_FW_FLASH_CNT - 1)
+};
+
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
--
2.43.0
