This adds very basic device tree files for the Marvell Armada 1500 SoC
(88DE3100) and the Sony NSZ-GS7 GoogleTV board. Currently, SoC only has
nodes for cpus, some clocks, l2 cache controller, local timer, apb timers,
uart, and interrupt controllers. The Sony NSZ-GS7 is a GoogleTV consumer
device comprising the Armada 1500 SoC above.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Reviewed-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx>
---
Changelog:
RCFv2->v1:
- switch to (soon to be) correct "marvell,pj4b" cpu compatible
- reference fixed-clock for uarts instead of hard-coded clock-frequency
- disable timers except two for clksrc and clkevt
RFCv1->RFCv2:
- add binding documentation (Reported by Jason Cooper)
- change l2cc from aurora to tauros3 (Reported by Thomas Petazzoni)
- add copyright reference
- adapt compatibles to mach-berlin instead of mach-mvebu
Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-doc@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
.../devicetree/bindings/arm/marvell,berlin.txt | 23 ++
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts | 29 +++
arch/arm/boot/dts/mv88de3100.dtsi | 227 ++++++++++++++++++++
4 files changed, 281 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell,berlin.txt
create mode 100644 arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts
create mode 100644 arch/arm/boot/dts/mv88de3100.dtsi
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
new file mode 100644
index 0000000..e389cba
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -0,0 +1,23 @@
+Marvell Berlin (88DE3xxx) family SoCs Device Tree Bindings
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Berlin (88DE3xxx) family, e.g. Armada 1500
+shall have the following properties:
+
+* Required root node properties:
+compatible: must contain "marvell,berlin"
+
+In addition, the above compatible shall be extended with the specific
+SoC and board used. Currently known SoC compatibles are:
+ "marvell,88de3100" for Marvell 88DE3100 (Armada 1500),
+ "marvell,88de3010" for Marvell 88DE3010 (Armada 1000),
+ "marvell,88de3005" for Marvell 88DE3005 (Armada 1500-mini)
+
+* Example:
+
+/ {
+ model = "Sony NSZ-GS7";
+ compatible = "sony,nsz-gs7", "marvell,88de3100", "marvell,berlin";
+
+ ...
+}
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 802720e..e86933a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -46,6 +46,8 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
bcm28155-ap.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += \
+ mv88de3100-sony-nsz-gs7.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
diff --git a/arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts b/arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts
new file mode 100644
index 0000000..81025ce
--- /dev/null
+++ b/arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts
@@ -0,0 +1,29 @@
+/*
+ * Device Tree file for Sony NSZ-GS7
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "mv88de3100.dtsi"
+
+/ {
+ model = "Sony NSZ-GS7";
+ compatible = "sony,nsz-gs7", "marvell,88de3100", "marvell,berlin";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1 GB */
+ };
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm/boot/dts/mv88de3100.dtsi b/arch/arm/boot/dts/mv88de3100.dtsi
new file mode 100644
index 0000000..d434015
--- /dev/null
+++ b/arch/arm/boot/dts/mv88de3100.dtsi
@@ -0,0 +1,227 @@
+/*
+ * Device Tree Include file for Marvell 88DE3100 (Armada 1500) SoC
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
+ *
+ * based on GPL'ed 2.6 kernel sources
+ * (c) Marvell International Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "Marvell 88DE3100 (Armada 1500) SoC";
+ compatible = "marvell,88de3100", "marvell,berlin";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ smclk: sysmgr-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ cfgclk: cfg-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ sysclk: system-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ ranges = <0 0xf7000000 0x1000000>;
+
+ l2: l2-cache-controller@ac0000 {
+ compatible = "marvell,tauros3-cache";
+ reg = <0xac0000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller@ad1000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ local-timer@ad0600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xad0600 0x20>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>;
+ };
+
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe80000 0x10000>;
+ interrupt-parent = <&aic>;
+
+ timer0: timer@2c00 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c00 0x14>;
+ interrupts = <8>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "okay";
+ };
+
+ timer1: timer@2c14 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c14 0x14>;
+ interrupts = <9>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "okay";
+ };
+
+ timer2: timer@2c28 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c28 0x14>;
+ interrupts = <10>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "disabled";
+ };
+
+ timer3: timer@2c3c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c3c 0x14>;
+ interrupts = <11>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "disabled";
+ };
+
+ timer4: timer@2c50 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c50 0x14>;
+ interrupts = <12>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "disabled";
+ };
+
+ timer5: timer@2c64 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c64 0x14>;
+ interrupts = <13>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "disabled";
+ };
+
+ timer6: timer@2c78 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c78 0x14>;
+ interrupts = <14>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "disabled";
+ };
+
+ timer7: timer@2c8c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x2c8c 0x14>;
+ interrupts = <15>;
+ clocks = <&cfgclk>;
+ clock-names = "timer";
+ status = "disabled";
+ };
+
+ aic: interrupt-controller@3000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3000 0xc00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ apb@fc0000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xfc0000 0x10000>;
+ interrupt-parent = <&sic>;
+
+ uart0: serial@9000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x9000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ interrupts = <8>;
+ clocks = <&smclk>;
+ status = "disabled";
+ };
+
+ uart1: serial@a000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xa000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ interrupts = <9>;
+ clocks = <&smclk>;
+ status = "disabled";
+ };
+
+ uart2: serial@b000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xb000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ interrupts = <10>;
+ clocks = <&smclk>;
+ status = "disabled";
+ };
+
+ sic: interrupt-controller@e000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0xe000 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
