Re: [PATCH RFC 00/20] Add Counter delegation ISA extension support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/17/24 12:28, Ian Rogers wrote:
On Fri, Feb 16, 2024 at 4:58 PM Atish Patra <atishp@xxxxxxxxxxxx> wrote:

This series adds the counter delegation extension support. It is based on
very early PoC work done by Kevin Xue and mostly rewritten after that.
The counter delegation ISA extension(Smcdeleg/Ssccfg) actually depends
on multiple ISA extensions.

1. S[m|s]csrind : The indirect CSR extension[1] which defines additional
    5 ([M|S|VS]IREG2-[M|S|VS]IREG6) register to address size limitation of
    RISC-V CSR address space.
2. Smstateen: The stateen bit[60] controls the access to the registers
    indirectly via the above indirect registers.
3. Smcdeleg/Ssccfg: The counter delegation extensions[2]

The counter delegation extension allows Supervisor mode to program the
hpmevent and hpmcounters directly without needing the assistance from the
M-mode via SBI calls. This results in a faster perf profiling and very
few traps. This extension also introduces a scountinhibit CSR which allows
to stop/start any counter directly from the S-mode. As the counter
delegation extension potentially can have more than 100 CSRs, the specification
leverages the indirect CSR extension to save the precious CSR address range.

Due to the dependency of these extensions, the following extensions must be
enabled in qemu to use the counter delegation feature in S-mode.

"smstateen=true,sscofpmf=true,ssccfg=true,smcdeleg=true,smcsrind=true,sscsrind=true"

When we access the counters directly in S-mode, we also need to solve the
following problems.

1. Event to counter mapping
2. Event encoding discovery

The RISC-V ISA doesn't define any standard either for event encoding or the
event to counter mapping rules.

Until now, the SBI PMU implementation relies on device tree binding[3] to
discover the event to counter mapping in RISC-V platform in the firmware. The
SBI PMU specification[4] defines event encoding for standard perf events as well.
Thus, the kernel can query the appropriate counter for an given event from the
firmware.

However, the kernel doesn't need any firmware interaction for hardware
counters if counter delegation is available in the hardware. Thus, the driver
needs to discover the above mappings/encodings by itself without any assistance
from firmware. One of the options considered was to extend the PMU DT parsing
support to kernel as well. However, that requires additional support in ACPI
based system. It also needs more infrastructure in the virtualization as well.

This patch series solves the above problem #1 by extending the perf tool in a
way so that event json file can specify the counter constraints of each event
and that can be passed to the driver to choose the best counter for a given
event. The perf stat metric series[5] from Weilin already extend the perf tool
to parse "Counter" property to specify the hardware counter restriction.
I have included the patch from Weilin in this series for verification purposes
only. I will rebase as that series evolves.

This series extends that support by converting comma separated string to a
bitmap. The counter constraint bitmap is passed to the perf driver via
newly introduced "counterid_mask" property set in "config2". Even though, this
is a generic perf tool change, this should not affect any other architecture
if "counterid_mask" is not mapped.

@Weilin: Please let me know if there is a better way to solve the problem I
described.

The problem #2 is solved by defining a architecture specific override function
that will replace the perf standard event encoding with an encoding specified
in the json file with the same event name. The alternate solution considered
was to specify the encodings in the driver. However, these encodings are vendor
specific in absence of an ISA guidelines and will become unmanageable with
so many RISC-V vendors touching the driver for their encoding.

The override is only required when counter delegation is available in the
platform which is detected at the runtime. The SBI PMU (current implementation)
doesn't require any override as it defines the standard event encoding. The
hwprobe syscall defined for RISC-V is used for this detection in this series.
A sysfs based property can be explored to do the same but we may require
hwprobe in future given the churn of extensions in RISC-V. That's why, I went
with hwprobe. Let me know if anybody thinks that's a bad idea.

The perf tool also hook allows RISC-V ISA platform vendors to define their
encoding for any standard perf or ISA event. I have tried to cover all the use
cases that I am aware of (stat, record, top). Please let me know if I have
missed any particular use case where architecture hook must be invoked. I am
also open to any other idea to solve the above said problem.

Hi Atish,

Thank you for the work! I know how the perf tool discovers events is
somewhat assumed knowledge, I thought I'd just go through it here and
explain a difference that is landing in Linux 6.8, as well as recent
heterogeneous/hybrid/big.little support changes, just so those who
aren't up to speed can catch up for the sake of discussion on this
approach - sorry for turning this into a longer email than it perhaps
needs to be, and the historical take may lack accuracy that I
apologize in advance for.

The job of discovering events is to map a name like "cycles" into a
set up for the perf_event_attr passed to perf_event_open. This sounds
simple but "cycles" may be encoded differently for different PMUs on a
heterogeneous system, it may also be an event on an accelerator like a
GPU. So the first thing to recognize is that a name like "cycles" may
map onto multiple struct perf_event_attr values. The behavior of how
the perf tool does this lacks consistency, for example are all or just
core PMUs considered, but this is deliberate for the sake of somewhat
consistency by the tool over time. Perhaps in the future we'll
change/fix this as things like accelerators dominate performance
concerns.

The next thing is that what "cycles" means has been evolving over
Linux releases. Originally "cycles" was assumed to be a CPU event and
there were other events like "page-faults" which were software events.
In perf_event.h there are enums for the "type" of event (hardware,
software, cache, etc.) and for the actual event itself - cycles is
"config" value 0. In the code we tend to refer to this kind of
encoding as legacy. An ability was added (maybe it was always there)
to dynamically add PMUs and PMUs advertise the value for the struct
perf_event_attr through sysfs in  "/sys/devices/<pmu name>/type". On
x86 the performance core typically has a type matching the legacy
hardware number, but on ARM this isn't the case. So that legacy events
can work on heterogeneous/hybrid/big.little systems where there should
be multiple PMUs (looking at most Android devices for misconfiguring
this), there is an extended type field in the top 32-bits of the
struct perf_event_attr config. The extended type means I want this
legacy event type on the extended type PMU.

For non-legacy events there is a problem of how to map a name to a
config value (I'll say singular config value but overtime it has
actually become 4 64-bit values). The sysfs format directory
"/sys/devices/<pmu name>/format" does this. The files in the format
directory say that on x86 the event is encoded in the first byte of
the config and the umask in the second byte. If there is an event like
"assists.any" that has an event of 0xc1 and a umask of 7, then the
perf tool knows to create a config value of 0x7c1 using the format
encoding.

To go from an event name like "cycles" to a format encoding there are
two places to look, the first is "/sys/devices/<pmu name>/events/". In
the events directory on x86 there is a "cpu-cycles" that contains
"event=0x3c", i.e. a format style encoding. The second are the json
files that are mapped to format style encodings for a specific cpuid
by jevents.py. The easiest way to see the 2nd kind is to run "perf
list --details":
```
...
   assists.any
       [Number of occurrences where a microcode assist is invoked by hardware]
        default_core/event=0xc1,period=0x186a3,umask=0x7/
...
```
We can see there is a format style encoding that has been built into
the perf tool.

A place where ambiguity creeps in and is changing in Linux 6.8 is what
to do when we have the same event in places like the legacy name,
sysfs and the json? The behavior we have is:
1) "perf stat -e cycles ..." - the event was specified without PMUs,
it is assumed a legacy encoding on all core PMUs is preferred (note
non-core PMUs that have a cycles event are ignored, but this wouldn't
be the case if the event weren't a legacy event name)
2) "perf stat -e cpu/cycles/" - the event was specified with a core
PMU, prior to 6.8 (ie any current perf tool), a legacy encoding will
be used. In 6.8 and after the json and sysfs encoding will have
priority: https://lore.kernel.org/r/20231123042922.834425-1-irogers@xxxxxxxxxx
3) "perf stat -e pmu/cycles/" - event was specified with a non-core
PMU so a legacy encoding won't be considered, only json and sysfs.

As I understand the problem you are trying to fix in the perf tool it
is for behavior 1 above, this is because the PMU driver wants the
legacy event encodings to be in json so it needn't discover them.
Behaviors 2 and 3 already prefer json encodings that are built into
the perf tool.

So given behavior 1 is kind of weird, it considers different PMUs
dependent on whether the event is legacy or not, it doesn't override
with a sysfs/json event if one is present, why don't we look to change
behavior 1 so that it is more like behaviors 2 and 3? I believe this
gives you the ability to override legacy events you want. At the same
time I'd like to also remove the "only core PMUs" assumption.


Absolutely. Thanks for the detailed context and walking through the different cases for each event type.

What would this look like? Well in the current code we take a legacy
event and then create a perf_event_attr for each core PMU:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/parse-events.c?h=perf-tools-next#n1348
We'd need to change this so that we wild card all the PMUs and
consider the sysfs/json events first, which is what we already do
here:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/parse-events.y?h=perf-tools-next#n305
with the sysfs/json fix up being here:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/parse-events.c?h=perf-tools-next#n1016

As with the 6.8 change to prioritize sysfs/json over legacy the
largest part of this change will be updating all the test
expectations. Wdyt?


That's awesome. That's exactly what I want. Let me know if you are going to push that change or want me to work on it while revising this series.

I am happy to test those changes either way.

Things this patch series does that I don't like:
  - hardcoding the expected CPU's PMU to "cpu", this should almost
certainly be an iterator over all core PMU types. This allows core

Agreed. I did not like this approach either and not sure if this is the best method to fix the problem we have. I should have clarified well that in the cover letter.

PMUs not to be called "cpu" and for heterogeneous configurations to
work.
  - doing things in an arch specific way. Test coverage is really hard


We do have an additional architecture specific issue at hand here.
As described, we need the event mapping with platforms with newer ISA extensions but doesn't need it for older platforms without ISA extensions. In addition to that, the new ISA extension doesn't cover virtualization. Thus, kvm guests continue to rely on the old way of discovering the events through SBI (ecall) interface.

Thus, a platform (e.g Qemu) can have both options present depending on
how it is configured.

To cover both cases, I introduced a RISC-V specific mechanism to detect the presence of the ISA extension in the perf tool.

"PATCH 18-20 adds hwprobe mechanism to enable perf to detect if platform supports delegation extensions."

If we don't want to keep any architecture specific hooks in this path, can we use a sysfs way to enable/disable mapping ?

I believe the pmu driver can update the sysfs for the perf tool to decide in that case ?

and when something lives in arch directory we lose coverage unless we
run on that machine type. Ugh, I'm just reminded that ARM
heterogeneous is broken because of an arch override that doesn't
consider >1 core PMU. Testing an ARM heterogenous PMU set up is hard
but not doing so breaks people running Linux on M1 macs. Really we
should just have PMU specific behaviors and the arch directory should
disappear. This would also greatly help cross architecture work where
you may record from perf on one architecture, but analyze the data on
another.
  - we've been moving to have perf and the json have less special
architecture knowledge. Weilin's patches aside, we've added things
like  "/sys/devices/<pmu name>/caps/slots" so that metrics can use
"#slots" rather than hard coding the pipeline width in each metric. My
hope for Weilin's patches is that we can make it less Intel specific
and ultimately we may be able to advertise the specific features like
number of fixed and generic counters via something like sysfs.

While that's ideal for x86/ARM64 where number of platform vendors are less (x86) or ISA has defined all-to-all event to counter mapping.

In RISC-V, we tried to push for all-to-all mapping which was not accepted withing RISC-V working groups. Every platform vendor will most likely end up in a different mapping of event to counters.

Thus, event to counter mapping via "Counter" field in json solve this
problem quite well. The only downside is that there is no common way across the architecture to pass that information to the pmu driver.

Hence a RISC-V specific solution via config2
https://lore.kernel.org/lkml/20240217005738.3744121-17-atishp@xxxxxxxxxxxx/

Please let me know if this can be solved in an eficient way as well.

However, the counters an event can go on is a property of the event so
I see a need for the sysfs/json to add this.

Congratulations if you got this far, sorry this email was so long. Thanks,
Ian


Apologies for the delayed reply and Thanks again!

PATCH organization:
PATCH 1 is from the perf metric series[5]
PATCH 2-5 defines and implements the indirect CSR extension.
PATCH 6-10 defines the other required ISA extensions.
PATCH 11 just an overall restructure of the RISC-V PMU driver.
PATCH 12-14 implements the counter delegation extension and new perf tool
plumbings to solve #1 and #2.
PATCH 15-16 improves the perf tool support to solve #1 and #2.
PATCH 17 adds a perf json file for qemu virt machine.
PATCH 18-20 adds hwprobe mechanism to enable perf to detect if platform supports
delegation extensions.

There is no change in process to run perf stat/record and will continue to work
as it is as long as the relevant extensions have been enabled in Qemu.

However, the perf tool needs to be recompiled with as it requires new kenrel
headers.

The Qemu patches can be found here:
https://github.com/atishp04/qemu/tree/counter_delegation_rfc

The opensbi patch can be found here:
https://github.com/atishp04/opensbi/tree/counter_delegation_v1

The Linux kernel patches can be found here:
https://github.com/atishp04/linux/tree/counter_delegation_rfc

[1] https://github.com/riscv/riscv-indirect-csr-access
[2] https://github.com/riscv/riscv-smcdeleg-ssccfg
[3] https://www.kernel.org/doc/Documentation/devicetree/bindings/perf/riscv%2Cpmu.yaml
[4] https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-pmu.adoc
[5] https://lore.kernel.org/all/20240209031441.943012-4-weilin.wang@xxxxxxxxx/

Atish Patra (17):
RISC-V: Add Sxcsrind ISA extension definition and parsing
dt-bindings: riscv: add Sxcsrind ISA extension description
RISC-V: Define indirect CSR access helpers
RISC-V: Add Ssccfg ISA extension definition and parsing
dt-bindings: riscv: add Ssccfg ISA extension description
RISC-V: Add Smcntrpmf extension parsing
dt-bindings: riscv: add Smcntrpmf ISA extension description
RISC-V: perf: Restructure the SBI PMU code
RISC-V: perf: Modify the counter discovery mechanism
RISC-V: perf: Implement supervisor counter delegation support
RISC-V: perf: Use config2 for event to counter mapping
tools/perf: Add arch hooks to override perf standard events
tools/perf: Pass the Counter constraint values in the pmu events
perf: Add json file for virt machine supported events
tools arch uapi: Sync the uinstd.h header file for RISC-V
RISC-V: Add hwprobe support for Counter delegation extensions
tools/perf: Detect if platform supports counter delegation

Kaiwen Xue (2):
RISC-V: Add Sxcsrind ISA extension CSR definitions
RISC-V: Add Sscfg extension CSR definition

Weilin Wang (1):
perf pmu-events: Add functions in jevent.py to parse counter and event
info for hardware aware grouping

Documentation/arch/riscv/hwprobe.rst          |  10 +
.../devicetree/bindings/riscv/extensions.yaml |  34 +
MAINTAINERS                                   |   4 +-
arch/riscv/include/asm/csr.h                  |  47 ++
arch/riscv/include/asm/csr_ind.h              |  42 ++
arch/riscv/include/asm/hwcap.h                |   5 +
arch/riscv/include/asm/sbi.h                  |   2 +-
arch/riscv/include/uapi/asm/hwprobe.h         |   4 +
arch/riscv/kernel/cpufeature.c                |   5 +
arch/riscv/kernel/sys_hwprobe.c               |   3 +
arch/riscv/kvm/vcpu_pmu.c                     |   2 +-
drivers/perf/Kconfig                          |  16 +-
drivers/perf/Makefile                         |   4 +-
.../perf/{riscv_pmu.c => riscv_pmu_common.c}  |   0
.../perf/{riscv_pmu_sbi.c => riscv_pmu_dev.c} | 654 ++++++++++++++----
include/linux/perf/riscv_pmu.h                |  13 +-
tools/arch/riscv/include/uapi/asm/unistd.h    |  14 +-
tools/perf/arch/riscv/util/Build              |   2 +
tools/perf/arch/riscv/util/evlist.c           |  60 ++
tools/perf/arch/riscv/util/pmu.c              |  41 ++
tools/perf/arch/riscv/util/pmu.h              |  11 +
tools/perf/builtin-record.c                   |   3 +
tools/perf/builtin-stat.c                     |   2 +
tools/perf/builtin-top.c                      |   3 +
.../pmu-events/arch/riscv/arch-standard.json  |  10 +
tools/perf/pmu-events/arch/riscv/mapfile.csv  |   1 +
.../pmu-events/arch/riscv/qemu/virt/cpu.json  |  30 +
.../arch/riscv/qemu/virt/firmware.json        |  68 ++
tools/perf/pmu-events/jevents.py              | 186 ++++-
tools/perf/pmu-events/pmu-events.h            |  25 +-
tools/perf/util/evlist.c                      |   6 +
tools/perf/util/evlist.h                      |   6 +
32 files changed, 1167 insertions(+), 146 deletions(-)
create mode 100644 arch/riscv/include/asm/csr_ind.h
rename drivers/perf/{riscv_pmu.c => riscv_pmu_common.c} (100%)
rename drivers/perf/{riscv_pmu_sbi.c => riscv_pmu_dev.c} (61%)
create mode 100644 tools/perf/arch/riscv/util/evlist.c
create mode 100644 tools/perf/arch/riscv/util/pmu.c
create mode 100644 tools/perf/arch/riscv/util/pmu.h
create mode 100644 tools/perf/pmu-events/arch/riscv/arch-standard.json
create mode 100644 tools/perf/pmu-events/arch/riscv/qemu/virt/cpu.json
create mode 100644 tools/perf/pmu-events/arch/riscv/qemu/virt/firmware.json

--
2.34.1






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux