[PATCH v7 23/36] drm/connector: hdmi: Add RGB Quantization Range to the connector state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



HDMI controller drivers will need to figure out the RGB range they need
to configure based on a mode and property values. Let's expose that in
the HDMI connector state so drivers can just use that value.

Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
---
 drivers/gpu/drm/drm_atomic.c              |  1 +
 drivers/gpu/drm/drm_atomic_state_helper.c | 29 +++++++++++++++++++++++++++++
 include/drm/drm_connector.h               |  6 ++++++
 3 files changed, 36 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 3e57d98d8418..ec6c6beda5c9 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1147,6 +1147,7 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
 	    connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
 		drm_printf(p, "\tbroadcast_rgb=%s\n",
 			   drm_hdmi_connector_get_broadcast_rgb_name(state->hdmi.broadcast_rgb));
+		drm_printf(p, "\tis_full_range=%c\n", state->hdmi.is_full_range ? 'y' : 'n');
 		drm_printf(p, "\toutput_bpc=%u\n", state->hdmi.output_bpc);
 		drm_printf(p, "\toutput_format=%s\n",
 			   drm_hdmi_connector_get_output_format_name(state->hdmi.output_format));
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 0e8fb653965a..e66272c0d006 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -664,6 +664,33 @@ connector_state_get_mode(const struct drm_connector_state *conn_state)
 	return &crtc_state->mode;
 }
 
+static bool hdmi_is_full_range(const struct drm_connector *connector,
+			       const struct drm_connector_state *state)
+{
+	const struct drm_display_info *display = &connector->display_info;
+	const struct drm_display_mode *mode =
+		connector_state_get_mode(state);
+
+	/*
+	 * The Broadcast RGB property only applies to RGB format, and
+	 * i915 just assumes limited range for YCbCr output, so let's
+	 * just do the same.
+	 */
+	if (state->hdmi.output_format != HDMI_COLORSPACE_RGB)
+		return false;
+
+	if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_FULL)
+		return true;
+
+	if (state->hdmi.broadcast_rgb == DRM_HDMI_BROADCAST_RGB_LIMITED)
+		return false;
+
+	if (!display->is_hdmi)
+		return true;
+
+	return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
+}
+
 static bool
 sink_supports_format_bpc(const struct drm_connector *connector,
 			 const struct drm_display_info *info,
@@ -910,6 +937,8 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
 		connector_state_get_mode(new_state);
 	int ret;
 
+	new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);
+
 	ret = hdmi_compute_config(connector, new_state, mode);
 	if (ret)
 		return ret;
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index bb6b6a36ade3..3eaf4d54364d 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1070,6 +1070,12 @@ struct drm_connector_state {
 		 */
 		enum drm_hdmi_broadcast_rgb broadcast_rgb;
 
+		/**
+		 * @is_full_range: Is the output supposed to use a full
+		 * RGB Quantization Range or not?
+		 */
+		bool is_full_range;
+
 		/**
 		 * @output_bpc: Bits per color channel to output.
 		 */

-- 
2.43.2





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux