Add the PoE pse attributes prefix to be able to use PoE interface. Example usage: ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get \ --json '{"header":{"dev-name":"eth0"}}' {'header': {'dev-index': 4, 'dev-name': 'eth0'}, 'c33-pse-admin-state': 3, 'c33-pse-pw-d-status': 4} ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-set \ --json '{"header":{"dev-name":"eth0"}, "c33-pse-admin-control":3}' This patch is sponsored by Dent Project <dentproject@xxxxxxxxxxxxxxxxxxx>. Reviewed-by: Andrew Lunn <andrew@xxxxxxx> Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx> --- Changes in v2: - Follow the "c33" PoE prefix naming change. - Add the ethtool auto generated code. Changes in v3: - Remove the ethtool auto generated code. --- Documentation/netlink/specs/ethtool.yaml | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml index 33e81fa189ca..beaab9f0017f 100644 --- a/Documentation/netlink/specs/ethtool.yaml +++ b/Documentation/netlink/specs/ethtool.yaml @@ -889,6 +889,18 @@ attribute-sets: name: podl-pse-pw-d-status type: u32 name-prefix: ethtool-a- + - + name: c33-pse-admin-state + type: u32 + name-prefix: ethtool-a- + - + name: c33-pse-admin-control + type: u32 + name-prefix: ethtool-a- + - + name: c33-pse-pw-d-status + type: u32 + name-prefix: ethtool-a- - name: rss attributes: @@ -1574,6 +1586,9 @@ operations: - podl-pse-admin-state - podl-pse-admin-control - podl-pse-pw-d-status + - c33-pse-admin-state + - c33-pse-admin-control + - c33-pse-pw-d-status dump: *pse-get-op - name: pse-set -- 2.25.1