Re: [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Friday 20 September 2013 04:41 AM, Russell King wrote:
The correct way for a driver to specify the coherent DMA mask is
not to directly access the field in the struct device, but to use
dma_set_coherent_mask().  Only arch and bus code should access this
member directly.

Convert all direct write accesses to using the correct API.

Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
  drivers/ata/pata_ixp4xx_cf.c             |    5 ++++-
  drivers/gpu/drm/exynos/exynos_drm_drv.c  |    6 +++++-
  drivers/gpu/drm/omapdrm/omap_dmm_tiler.c |    5 +++--
  3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 1ec53f8..ddf470c 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -144,6 +144,7 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
  	struct ata_host *host;
  	struct ata_port *ap;
  	struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
+	int ret;

  	cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  	cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -157,7 +158,9 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
  		return -ENOMEM;

  	/* acquire resources and fill host */
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;

  	data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
  	data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index bb82ef7..81192d0 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -286,7 +286,11 @@ static struct drm_driver exynos_drm_driver = {

  static int exynos_drm_platform_probe(struct platform_device *pdev)
  {
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	int ret;
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;

  	return drm_platform_init(&exynos_drm_driver, pdev);
  }
diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
index acf6678..701c4c1 100644
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -664,8 +664,9 @@ static int omap_dmm_probe(struct platform_device *dev)
  	}

  	/* set dma mask for device */
-	/* NOTE: this is a workaround for the hwmod not initializing properly */
-	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto fail;

Tested with omapdrm on omap4 panda es board.

Thanks,
Archit

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux