Re: [PATCH net-next v3 10/17] dt-bindings: net: pse-pd: Add another way of describing several PSE PIs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 08 Feb 2024 14:08:47 +0100, Kory Maincent wrote:
> Before hand we set "#pse-cell" to 1 to define a PSE controller with
> several PIs (Power Interface). The drawback of this was that we could not
> have any information on the PI except its number.
> Add support for pse_pis and pse_pi node to be able to have more information
> on the PI like the number of pairset used and the pairset pinout.
> 
> Sponsored-by: Dent Project <dentproject@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
> ---
> 
> Changes in v3:
> - New patch
> ---
>  .../bindings/net/pse-pd/pse-controller.yaml        | 101 ++++++++++++++++++++-
>  1 file changed, 98 insertions(+), 3 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml:80:13: [warning] wrong indentation: expected 14 but found 12 (indentation)
./Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml:80:15: [error] string value is redundantly quoted with any quotes (quoted-strings)
./Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml:81:15: [error] string value is redundantly quoted with any quotes (quoted-strings)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml: $defs:pse_pi:properties:pairset-names: {'description': 'Names of the pairsets as per IEEE 802.3-2022, Section 145.2.4. Valid values are "alternative-a" and "alternative-b". Each name should correspond to a phandle in the \'pairset\' property pointing to the power supply for that pairset.', '$ref': '/schemas/types.yaml#/definitions/string-array', 'minItems': 1, 'maxItems': 2, 'items': [{'enum': ['alternative-a', 'alternative-b']}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml: $defs:pse_pi:properties:pairset-names: 'oneOf' conditional failed, one must be fixed:
	[{'enum': ['alternative-a', 'alternative-b']}] is too short
	False schema does not allow 1
	hint: "minItems" is only needed if less than the "items" list length
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240208-feature_poe-v3-10-531d2674469e@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux