Add the PD692x0 I2C Power Sourcing Equipment controller device tree bindings documentation. Sponsored-by: Dent Project <dentproject@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx> --- Changes in v2: - Enhance ports-matrix description. - Replace additionalProperties by unevaluatedProperties. - Drop i2c suffix. Changes in v3: - Remove ports-matrix parameter. - Add description of all physical ports and managers. - Add pse_pis subnode moving to the API of pse-controller binding. - Remove the MAINTAINERS section for this driver as I will be maintaining all pse-pd subsystem. --- .../bindings/net/pse-pd/microchip,pd692x0.yaml | 157 +++++++++++++++++++++ 1 file changed, 157 insertions(+) diff --git a/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml new file mode 100644 index 000000000000..57ba5365157c --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PD692x0 Power Sourcing Equipment controller + +maintainers: + - Kory Maincent <kory.maincent@xxxxxxxxxxx> + +allOf: + - $ref: pse-controller.yaml# + +properties: + compatible: + enum: + - microchip,pd69200 + - microchip,pd69210 + - microchip,pd69220 + + reg: + maxItems: 1 + + managers: + $ref: "#/$defs/managers" + description: + List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager + have 4 or 8 physical ports according to the chip version. No need to + specify the SPI chip select as it is automatically detected by the + PD692x0 PSE controller. The PSE managers have to be described from + the lowest chip select to the greatest one, which is the detection + behavior of the PD692x0 PSE controller. The PD692x0 support up to + 12 PSE managers which can expose up to 96 physical ports. All + physical ports available on a manager have to be described in the + incremental order even if they are not used. + +required: + - compatible + - reg + - pse_pis + +$defs: + manager: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + reg: + maxItems: 1 + + patternProperties: + '^port@[0-7]$': + type: object + required: + - reg + + required: + - reg + + managers: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^manager@0[0-9]|1[0-2]$": + $ref: "#/$defs/manager" + + required: + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@3c { + compatible = "microchip,pd69200"; + reg = <0x3c>; + + managers { + #address-cells = <1>; + #size-cells = <0>; + + manager@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phys0: port@0 { + reg = <0>; + }; + + phys1: port@1 { + reg = <1>; + }; + + phys2: port@2 { + reg = <2>; + }; + + phys3: port@3 { + reg = <3>; + }; + }; + + manager@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + phys4: port@0 { + reg = <0>; + }; + + phys5: port@1 { + reg = <1>; + }; + + phys6: port@2 { + reg = <2>; + }; + + phys7: port@3 { + reg = <3>; + }; + }; + }; + + pse_pis { + #address-cells = <1>; + #size-cells = <0>; + + pse_pi0: pse_pi@0 { + reg = <0>; + #pse-cells = <0>; + pairset-names = "alternative-a", "alternative-b"; + pairsets = <&phys0>, <&phys1>; + }; + pse_pi1: pse_pi@1 { + reg = <1>; + #pse-cells = <0>; + pairset-names = "alternative-a"; + pairsets = <&phys2>; + }; + }; + }; + }; -- 2.25.1
