Re: [PATCH v3 3/3] hwmon: Driver for Nuvoton NCT7363Y

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 22, 2023 at 09:33:52AM +0800, baneric926@xxxxxxxxx wrote:
> From: Ban Feng <kcfeng0@xxxxxxxxxxx>
> 
> NCT7363Y is an I2C based hardware monitoring chip from Nuvoton.
> 
> Signed-off-by: Ban Feng <kcfeng0@xxxxxxxxxxx>

Sorry for the late reply. I was waiting for the fan schema to be accepted,
but it looks like that may take more time.

Please fix the various issues reported by checkpatch --strict.
Additional comments inline.

> ---
>  Documentation/hwmon/index.rst   |   1 +
>  Documentation/hwmon/nct7363.rst |  33 ++
>  MAINTAINERS                     |   2 +
>  drivers/hwmon/Kconfig           |  11 +
>  drivers/hwmon/Makefile          |   1 +
>  drivers/hwmon/nct7363.c         | 515 ++++++++++++++++++++++++++++++++
>  6 files changed, 563 insertions(+)
>  create mode 100644 Documentation/hwmon/nct7363.rst
>  create mode 100644 drivers/hwmon/nct7363.c
> 
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 72f4e6065bae..178d3cae95de 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
>     mp5023
>     nct6683
>     nct6775
> +   nct7363
>     nct7802
>     nct7904
>     npcm750-pwm-fan
> diff --git a/Documentation/hwmon/nct7363.rst b/Documentation/hwmon/nct7363.rst
> new file mode 100644
> index 000000000000..89699c95aa4b
> --- /dev/null
> +++ b/Documentation/hwmon/nct7363.rst
> @@ -0,0 +1,33 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver nct7363
> +=====================
> +
> +Supported chip:
> +
> +  * Nuvoton NCT7363Y
> +
> +    Prefix: nct7363
> +
> +    Addresses: I2C 0x20, 0x21, 0x22, 0x23
> +
> +Author: Ban Feng <kcfeng0@xxxxxxxxxxx>
> +
> +
> +Description
> +-----------
> +
> +The NCT7363Y is a Fan controller which provides up to 16 independent
> +FAN input monitors, and up to 16 independent PWM output with SMBus interface.
> +
> +
> +Sysfs entries
> +-------------
> +
> +Currently, the driver supports the following features:
> +
> +======================= =======================================================
> +fanX_input		provide current fan rotation value in RPM
> +
> +pwmX			get or set PWM fan control value.
> +======================= =======================================================
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 53cfcc629aa1..e39c4fc01a3b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14842,6 +14842,8 @@ M:	Ban Feng <kcfeng0@xxxxxxxxxxx>
>  L:	linux-hwmon@xxxxxxxxxxxxxxx
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml
> +F:	Documentation/hwmon/nct7363.rst
> +F:	drivers/hwmon/nct7363.c
>  
>  NETDEVSIM
>  M:	Jakub Kicinski <kuba@xxxxxxxxxx>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index cf27523eed5a..a0229851fc64 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1605,6 +1605,17 @@ config SENSORS_NCT6775_I2C
>  	  This driver can also be built as a module. If so, the module
>  	  will be called nct6775-i2c.
>  
> +config SENSORS_NCT7363
> +	tristate "Nuvoton NCT7363Y"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  If you say yes here you get support for the Nuvoton NCT7363Y,
> +	  hardware monitoring chip.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called nct7363.
> +
>  config SENSORS_NCT7802
>  	tristate "Nuvoton NCT7802Y"
>  	depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index e84bd9685b5c..dd794aa06209 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -166,6 +166,7 @@ obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o
>  nct6775-objs			:= nct6775-platform.o
>  obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
>  obj-$(CONFIG_SENSORS_NCT6775_I2C) += nct6775-i2c.o
> +obj-$(CONFIG_SENSORS_NCT7363)	+= nct7363.o
>  obj-$(CONFIG_SENSORS_NCT7802)	+= nct7802.o
>  obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
>  obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
> diff --git a/drivers/hwmon/nct7363.c b/drivers/hwmon/nct7363.c
> new file mode 100644
> index 000000000000..1bf6e83afd7f
> --- /dev/null
> +++ b/drivers/hwmon/nct7363.c
> @@ -0,0 +1,515 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2023 Nuvoton Technology corporation.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/i2c.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define NCT7363_REG_GPIO_0_3		0x20
> +#define NCT7363_REG_GPIO_4_7		0x21
> +#define NCT7363_REG_GPIO_10_13		0x22
> +#define NCT7363_REG_GPIO_14_17		0x23
> +#define NCT7363_REG_PWMEN_0_7		0x38
> +#define NCT7363_REG_PWMEN_8_15		0x39
> +#define NCT7363_REG_FANINEN_0_7		0x41
> +#define NCT7363_REG_FANINEN_8_15	0x42
> +#define NCT7363_REG_FANINx_HVAL(x)	(0x48 + ((x) * 2))
> +#define NCT7363_REG_FANINx_LVAL(x)	(0x49 + ((x) * 2))
> +#define NCT7363_REG_FSCPxDUTY(x)	(0x90 + ((x) * 2))
> +#define NCT7363_REG_VENDOR_ID		0xFD
> +#define NCT7363_REG_CHIP_ID		0xFE
> +#define NCT7363_REG_DEVICE_ID		0xFF
> +
> +#define NUVOTON_ID			0x49
> +#define CHIP_ID				0x19
> +#define DEVICE_ID			0x88
> +
> +#define PWM_SEL(x)			(BIT(0) << ((x % 4) * 2))
> +#define FANIN_SEL(x)			(BIT(1) << ((x % 4) * 2))

(x). checkpatch -strict does report this.

> +#define BIT_CHECK(x)			(BIT(0) << x)

This is identical to BIT(x) so I really don't get the point.

> +
> +#define NCT7363_FANINx_LVAL_MASK	GENMASK(4, 0)

No CamelCase defines or variables, please.

> +#define NCT7363_FANIN_MASK		GENMASK(12, 0)
> +
> +#define NCT7363_PWM_COUNT		16
> +#define NCT7363_FANIN_COUNT		16
> +
> +#define REFRESH_INTERVAL		(2 * HZ)
> +
> +static inline unsigned long FAN_FROM_REG(u16 val)
> +{
> +	if ((val >= NCT7363_FANIN_MASK) || (val == 0))

Unnecessary () as reported by checkpatch.

Too bad the datasheet isn't public. It would be useful to know what
it means if the upper bits are set. Unconditionally reporting a fan
speed of 0 if any of the bits are set seems excessive unless there
is a good reason for it. If those bits indicate fan faults,
it might make sense to implement respective attributes.

[ Why do you keep this chip and NCT7362Y so secretive ? ]

> +		return	0;
> +
> +	return (1350000UL / val);
> +}
> +
> +static const unsigned short normal_i2c[] = {
> +	0x20, 0x21, 0x22, 0x23, I2C_CLIENT_END
> +};
> +
> +enum chips { nct7363 };

Unnecessary. If there are plans for this driver to support more chips
in the future, the enum can be added at that time. Yes, I can see in
Nuvoton's 2024 product selection document that there is a NCT7362Y
with the same number of fan and pwm channels, but that doesn't help
if the chips are kept under wrap.

Searching for the chips on the internet, I am reminded of
https://lore.kernel.org/lkml/20230607101827.8544-4-zev@xxxxxxxxxxxxxxxxx/T/
which introduces a quite similar driver with more functionality for NCT7362Y.
That submission even mentions a NCT7360 with 8 channels. Quite frankly
I am inclined to reject both drivers (not that I ever got an update for
the NCT7362Y driver, but anyway) until I get a better understanding
of the similarities and differences between NCT7362Y and NCT7363Y.
Please consider sending me datasheets for those chips.

> +
> +static const struct i2c_device_id nct7363_id[] = {
> +	{ "nct7363", nct7363 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, nct7363_id);
> +
> +static const struct of_device_id nct7363_of_match[] = {
> +	{ .compatible = "nuvoton,nct7363", .data = (void *)nct7363 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, nct7363_of_match);
> +
> +struct nct7363_data {
> +	struct regmap		*regmap;
> +	struct mutex		update_lock;
> +	bool			valid;
> +	unsigned long		last_updated; /* In jiffies */
> +
> +	u16			fanin_mask;
> +	u16			fan[NCT7363_FANIN_COUNT];
> +	u16			pwm_mask;
> +	u8			pwm[NCT7363_PWM_COUNT];
> +};
> +
> +static struct nct7363_data *nct7363_update_device(struct device *dev)

Personally I recommend to drop all local caching and just read values
through regmap as requested.

> +{
> +	struct nct7363_data *data = dev_get_drvdata(dev);
> +	unsigned int hi, lo, regval;
> +	int i, ret = 0;
> +
> +	mutex_lock(&data->update_lock);
> +
> +	if (!(time_after(jiffies, data->last_updated + REFRESH_INTERVAL)
> +	      || !data->valid))
> +		goto no_sensor_update;
> +
> +	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
> +		if (!(data->fanin_mask & BIT_CHECK(i)))
> +			continue;
> +
> +		/*
> +		 * High-byte register should be read first to latch
> +		 * synchronous low-byte value
> +		 */
> +		ret = regmap_read(data->regmap,
> +				  NCT7363_REG_FANINx_HVAL(i), &hi);
> +		if (ret)
> +			goto error;
> +
> +		ret = regmap_read(data->regmap,
> +				  NCT7363_REG_FANINx_LVAL(i), &lo);
> +		if (ret)
> +			goto error;
> +
> +		data->fan[i] = (hi << 5) | (lo & NCT7363_FANINx_LVAL_MASK);
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
> +		if (!(data->pwm_mask & BIT_CHECK(i)))
> +			continue;
> +
> +		ret = regmap_read(data->regmap,
> +				  NCT7363_REG_FSCPxDUTY(i), &regval);
> +		if (ret)
> +			goto error;
> +
> +		data->pwm[i] = regval;
> +	}
> +
> +	data->last_updated = jiffies;
> +	data->valid = true;
> +
> +error:
> +	if (ret)
> +		data = ERR_PTR(ret);
> +
> +no_sensor_update:
> +	mutex_unlock(&data->update_lock);
> +
> +	return data;
> +}
> +
> +static int nct7363_read_fan(struct device *dev, u32 attr, int channel,
> +			    long *val)
> +{
> +	struct nct7363_data *data = nct7363_update_device(dev);
> +	u16 cnt, rpm;
> +
> +	if (IS_ERR(data))
> +		return PTR_ERR(data);
> +
> +	switch (attr) {
> +	case hwmon_fan_input:
> +		cnt = data->fan[channel] & NCT7363_FANIN_MASK;
> +		rpm = FAN_FROM_REG(cnt);
> +		*val = (long)rpm;
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t nct7363_fan_is_visible(const void *_data, u32 attr, int channel)
> +{
> +	const struct nct7363_data *data = _data;
> +
> +	switch (attr) {
> +	case hwmon_fan_input:
> +		if (data->fanin_mask & BIT_CHECK(channel))
> +			return 0444;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int nct7363_read_pwm(struct device *dev, u32 attr, int channel,
> +			    long *val)
> +{
> +	struct nct7363_data *data = nct7363_update_device(dev);
> +	u16 ret;
> +
> +	if (IS_ERR(data))
> +		return PTR_ERR(data);
> +
> +	switch (attr) {
> +	case hwmon_pwm_input:
> +		ret = data->pwm[channel];
> +		*val = (long)ret;
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int nct7363_write_pwm(struct device *dev, u32 attr, int channel,
> +			     long val)
> +{
> +	struct nct7363_data *data = nct7363_update_device(dev);
> +	int ret;
> +
> +	if (IS_ERR(data))
> +		return PTR_ERR(data);
> +
> +	switch (attr) {
> +	case hwmon_pwm_input:
> +		if (val < 0 || val > 255)
> +			return -EINVAL;
> +		mutex_lock(&data->update_lock);
> +		ret = regmap_write(data->regmap,
> +				   NCT7363_REG_FSCPxDUTY(channel), val);
> +		if (ret == 0)
> +			data->pwm[channel] = val;
> +		mutex_unlock(&data->update_lock);
> +		return ret;
> +
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t nct7363_pwm_is_visible(const void *_data, u32 attr, int channel)
> +{
> +	const struct nct7363_data *data = _data;
> +
> +	switch (attr) {
> +	case hwmon_pwm_input:
> +		if (data->pwm_mask & BIT_CHECK(channel))
> +			return 0644;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int nct7363_read(struct device *dev, enum hwmon_sensor_types type,
> +			u32 attr, int channel, long *val)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		return nct7363_read_fan(dev, attr, channel, val);
> +	case hwmon_pwm:
> +		return nct7363_read_pwm(dev, attr, channel, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int nct7363_write(struct device *dev, enum hwmon_sensor_types type,
> +			 u32 attr, int channel, long val)
> +{
> +	switch (type) {
> +	case hwmon_pwm:
> +		return nct7363_write_pwm(dev, attr, channel, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t nct7363_is_visible(const void *data,
> +				  enum hwmon_sensor_types type,
> +				  u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		return nct7363_fan_is_visible(data, attr, channel);
> +	case hwmon_pwm:
> +		return nct7363_pwm_is_visible(data, attr, channel);
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static const struct hwmon_channel_info *nct7363_info[] = {
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT),
> +	HWMON_CHANNEL_INFO(pwm,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT),
> +	NULL
> +};
> +
> +static const struct hwmon_ops nct7363_hwmon_ops = {
> +	.is_visible = nct7363_is_visible,
> +	.read = nct7363_read,
> +	.write = nct7363_write,
> +};
> +
> +static const struct hwmon_chip_info nct7363_chip_info = {
> +	.ops = &nct7363_hwmon_ops,
> +	.info = nct7363_info,
> +};
> +
> +/* Return 0 if detection is successful, -ENODEV otherwise */
> +static int nct7363_detect(struct i2c_client *client,
> +			  struct i2c_board_info *info)
> +{
> +	struct i2c_adapter *adapter = client->adapter;
> +	int vendor, chip, device;
> +
> +	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> +		return -ENODEV;
> +
> +	vendor = i2c_smbus_read_byte_data(client, NCT7363_REG_VENDOR_ID);
> +	if (vendor != NUVOTON_ID)
> +		return -ENODEV;
> +
> +	chip = i2c_smbus_read_byte_data(client, NCT7363_REG_CHIP_ID);
> +	if (chip != CHIP_ID)
> +		return -ENODEV;
> +
> +	device = i2c_smbus_read_byte_data(client, NCT7363_REG_DEVICE_ID);
> +	if (device != DEVICE_ID)
> +		return -ENODEV;
> +
> +	strscpy(info->type, "nct7363", I2C_NAME_SIZE);
> +
> +	return 0;
> +}

Chip auto-detection is undesirable for new drivers since it increases
boot time. Please consider dropping this if it is not really needed
for some actual use case.

> +
> +static int nct7363_init_chip(struct nct7363_data *data)
> +{
> +	u8 i, gpio0_3 = 0, gpio4_7 = 0, gpio10_13 = 0, gpio14_17 = 0;
> +	int ret;
> +
> +	for (i = 0; i < NCT7363_PWM_COUNT; i++) {
> +		if (i < 4) {
> +			if (data->pwm_mask & BIT_CHECK(i))
> +				gpio0_3 |= PWM_SEL(i);
> +			if (data->fanin_mask & BIT_CHECK(i))
> +				gpio10_13 |= FANIN_SEL(i);
> +		} else if (i < 8) {
> +			if (data->pwm_mask & BIT_CHECK(i))
> +				gpio4_7 |= PWM_SEL(i);
> +			if (data->fanin_mask & BIT_CHECK(i))
> +				gpio14_17 |= FANIN_SEL(i);
> +		} else if (i < 12) {
> +			if (data->pwm_mask & BIT_CHECK(i))
> +				gpio10_13 |= PWM_SEL(i);
> +			if (data->fanin_mask & BIT_CHECK(i))
> +				gpio0_3 |= FANIN_SEL(i);
> +		} else {
> +			if (data->pwm_mask & BIT_CHECK(i))
> +				gpio14_17 |= PWM_SEL(i);
> +			if (data->fanin_mask & BIT_CHECK(i))
> +				gpio4_7 |= FANIN_SEL(i);
> +		}
> +	}
> +
> +	/* Pin Function Configuration */
> +	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_0_3, gpio0_3);
> +	if (ret < 0)
> +		return ret;
> +	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_4_7, gpio4_7);
> +	if (ret < 0)
> +		return ret;
> +	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_10_13, gpio10_13);
> +	if (ret < 0)
> +		return ret;
> +	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_14_17, gpio14_17);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* PWM and FANIN Monitoring Enable */
> +	ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_0_7,
> +			   data->pwm_mask & 0xff);
> +	if (ret < 0)
> +		return ret;
> +	ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_8_15,
> +			   (data->pwm_mask >> 8) & 0xff);
> +	if (ret < 0)
> +		return ret;
> +	ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_0_7,
> +			   data->fanin_mask & 0xff);
> +	if (ret < 0)
> +		return ret;
> +	ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_8_15,
> +			   (data->fanin_mask >> 8) & 0xff);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int nct7363_present_pwm_fanin(struct device *dev,
> +				     struct device_node *child,
> +				     struct nct7363_data *data)
> +{
> +	struct of_phandle_args args;
> +	int ret, fanin_cnt;
> +	u8 *fanin_ch;
> +	u8 ch, index;
> +
> +	ret = of_parse_phandle_with_args(child, "pwms", "#pwm-cells",
> +					 0, &args);
> +	if (ret)
> +		return ret;
> +
> +	data->pwm_mask |= BIT(args.args[0]);
> +
> +	fanin_cnt = of_property_count_u8_elems(child, "tach-ch");
> +	if (fanin_cnt < 1)
> +		return -EINVAL;
> +
> +	fanin_ch = devm_kcalloc(dev, fanin_cnt, sizeof(*fanin_ch), GFP_KERNEL);
> +	if (!fanin_ch)
> +		return -ENOMEM;
> +
> +	ret = of_property_read_u8_array(child, "tach-ch", fanin_ch, fanin_cnt);
> +	if (ret)
> +		return ret;
> +
> +	for (ch = 0; ch < fanin_cnt; ch++) {
> +		index = fanin_ch[ch];
> +		data->fanin_mask |= BIT(index);
> +	}
> +
> +	return 0;
> +}

I didn't check if this aligns with the fan bindings schema. Unfortunately
the dt maintainer's reviewed-by: tag got lost with
https://patchwork.kernel.org/project/linux-hwmon/patch/20231222013352.3873689-2-kcfeng0@xxxxxxxxxxx/

o we can not really move forward until that is resolved.

> +
> +static const struct regmap_config nct7363_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static int nct7363_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct device_node *child;
> +	struct nct7363_data *data;
> +	struct device *hwmon_dev;
> +	int ret;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	data->regmap = devm_regmap_init_i2c(client, &nct7363_regmap_config);
> +	if (IS_ERR(data->regmap))
> +		return PTR_ERR(data->regmap);
> +
> +	mutex_init(&data->update_lock);
> +
> +	for_each_child_of_node(dev->of_node, child) {
> +		ret = nct7363_present_pwm_fanin(dev, child, data);
> +		if (ret) {
> +			of_node_put(child);
> +			return ret;
> +		}
> +	}
> +
> +	/* Initialize the chip */
> +	ret = nct7363_init_chip(data);
> +	if (ret)
> +		return ret;
> +
> +	hwmon_dev =
> +		devm_hwmon_device_register_with_info(dev, client->name, data,
> +						     &nct7363_chip_info, NULL);
> +	return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static struct i2c_driver nct7363_driver = {
> +	.class = I2C_CLASS_HWMON,
> +	.driver = {
> +		.name = "nct7363",
> +		.of_match_table = nct7363_of_match,
> +	},
> +	.probe = nct7363_probe,
> +	.id_table = nct7363_id,
> +	.detect = nct7363_detect,
> +	.address_list = normal_i2c,
> +};
> +
> +module_i2c_driver(nct7363_driver);
> +
> +MODULE_AUTHOR("CW Ho <cwho@xxxxxxxxxxx>");
> +MODULE_AUTHOR("Ban Feng <kcfeng0@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("NCT7363 Hardware Monitoring Driver");
> +MODULE_LICENSE("GPL");




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux