Re: Re: Re: [PATCH v5 08/44] drm/connector: hdmi: Add Broadcast RGB property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 02, 2024 at 05:40:47PM +0200, Ville Syrjälä wrote:
> On Fri, Feb 02, 2024 at 02:01:39PM +0100, Maxime Ripard wrote:
> > Hi,
> > 
> > On Mon, Jan 15, 2024 at 03:37:20PM +0100, Sebastian Wick wrote:
> > > > >  /**
> > > > >   * DOC: HDMI connector properties
> > > > >   *
> > > > > + * Broadcast RGB
> > > > > + *      Indicates the RGB Quantization Range (Full vs Limited) used.
> > > > > + *      Infoframes will be generated according to that value.
> > > > > + *
> > > > > + *      The value of this property can be one of the following:
> > > > > + *
> > > > > + *      Automatic:
> > > > > + *              RGB Range is selected automatically based on the mode
> > > > > + *              according to the HDMI specifications.
> > > > > + *
> > > > > + *      Full:
> > > > > + *              Full RGB Range is forced.
> > > > > + *
> > > > > + *      Limited 16:235:
> > > > > + *              Limited RGB Range is forced. Unlike the name suggests,
> > > > > + *              this works for any number of bits-per-component.
> > > > > + *
> > > > > + *      Drivers can set up this property by calling
> > > > > + *      drm_connector_attach_broadcast_rgb_property().
> > > > > + *
> > > > 
> > > > This is a good time to document this in more detail. There might be two
> > > > different things being affected:
> > > > 
> > > > 1. The signalling (InfoFrame/SDP/...)
> > > > 2. The color pipeline processing
> > > > 
> > > > All values of Broadcast RGB always affect the color pipeline processing
> > > > such that a full-range input to the CRTC is converted to either full- or
> > > > limited-range, depending on what the monitor is supposed to accept.
> > > > 
> > > > When automatic is selected, does that mean that there is no signalling,
> > > > or that the signalling matches what the monitor is supposed to accept
> > > > according to the spec? Also, is this really HDMI specific?
> > > > 
> > > > When full or limited is selected and the monitor doesn't support the
> > > > signalling, what happens?
> > > 
> > > Forgot to mention: user-space still has no control over RGB vs YCbCr on
> > > the cable, so is this only affecting RGB? If not, how does it affect
> > > YCbCr?
> > 
> > So I dug a bit into both the i915 and vc4 drivers, and it looks like if
> > we're using a YCbCr format, i915 will always use a limited range while
> > vc4 will follow the value of the property.
> 
> The property is literally called "Broadcast *RGB*".
> That should explain why it's only affecting RGB.

Right. And the limited range option is called "Limited 16:235" despite
being usable on bpc > 8 bits. Naming errors occurs, and history happens
to make names inconsistent too, that's fine and not an argument in
itself.

> Full range YCbCr is a much rarer beast so we've never bothered
> to enable it.

vc4 supports it.

> Eg. with DP it only became possible with the introduction of the VSC
> SDP (and I don't recall if there's additional capability checks that
> are also required). With DP MSA signalling full range YCbCr is not
> possible at all.

This is for HDMI only.

> I don't recall right now what the HDMI requirements are.

HDMI has supported it for a while, and it's defined (for example) in the
HDMI 1.4 spec in Section 6.6 - Video Quantization Ranges. It supports
limited and full range on both RGB and YCbCr, as long as the EDIDs state
so and the Infoframes signal it.

Maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux