Class-based I2C probing requires detect() and address_list both
to be set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if the driver
doesn't implement detect().
Class-based probing is a legacy mechanism, in addition apparently
nobody ever noticed that class-based probing has been non-functional
in both drivers from the very beginning. So drop the fragments of
class-based probing support.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
Documentation/hwmon/emc2305.rst | 1 -
drivers/hwmon/adt7410.c | 2 --
drivers/hwmon/emc2305.c | 5 -----
3 files changed, 8 deletions(-)
diff --git a/Documentation/hwmon/emc2305.rst b/Documentation/hwmon/emc2305.rst
index 2403dbaf2..d0bfffe46 100644
--- a/Documentation/hwmon/emc2305.rst
+++ b/Documentation/hwmon/emc2305.rst
@@ -6,7 +6,6 @@ Kernel driver emc2305
Supported chips:
Microchip EMC2305, EMC2303, EMC2302, EMC2301
- Addresses scanned: I2C 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d
Prefixes: 'emc2305'
Datasheet: Publicly available at the Microchip website :
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 952506779..fd214d9b3 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -95,14 +95,12 @@ static const struct i2c_device_id adt7410_ids[] = {
MODULE_DEVICE_TABLE(i2c, adt7410_ids);
static struct i2c_driver adt7410_driver = {
- .class = I2C_CLASS_HWMON,
.driver = {
.name = "adt7410",
.pm = pm_sleep_ptr(&adt7x10_dev_pm_ops),
},
.probe = adt7410_i2c_probe,
.id_table = adt7410_ids,
- .address_list = I2C_ADDRS(0x48, 0x49, 0x4a, 0x4b),
};
module_i2c_driver(adt7410_driver);
diff --git a/drivers/hwmon/emc2305.c b/drivers/hwmon/emc2305.c
index 29f0e4945..6ef733c0b 100644
--- a/drivers/hwmon/emc2305.c
+++ b/drivers/hwmon/emc2305.c
@@ -12,9 +12,6 @@
#include <linux/platform_data/emc2305.h>
#include <linux/thermal.h>
-static const unsigned short
-emc2305_normal_i2c[] = { 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d, I2C_CLIENT_END };
-
#define EMC2305_REG_DRIVE_FAIL_STATUS 0x27
#define EMC2305_REG_VENDOR 0xfe
#define EMC2305_FAN_MAX 0xff
@@ -611,14 +608,12 @@ static void emc2305_remove(struct i2c_client *client)
}
static struct i2c_driver emc2305_driver = {
- .class = I2C_CLASS_HWMON,
.driver = {
.name = "emc2305",
},
.probe = emc2305_probe,
.remove = emc2305_remove,
.id_table = emc2305_ids,
- .address_list = emc2305_normal_i2c,
};
module_i2c_driver(emc2305_driver);
--
2.43.0
