On 09/19/2013 06:22 AM, Lee Jones wrote:
>>>>> Do the sub-nodes have their own properties? If so, it would be worth
>>>>> breaking them up as other OSes could reuse the specifics. If they do,
>>>>> then you need so put them in the binding. If they don't, then you do
>>>>> not require sub-nodes. The MFD core will ensure the sub-devices are
>>>>> probed and there is no requirement for the of_node to be assigned.
>>>> You do see some reusable IP blocks (like the regualtors on the wm831x
>>>> PMICs for example, they're repeated blocks) which can be reused but
>>>> generally they have a register base as part of the binding. Personally
>>>> if it's just a property or two I'd probably just put them on the root
>>>> node for the device.
>>> Agreed. Besides, there doesn't seem to be *any* sub-device properties
>>> defined in the binding document. So what are you trying to achieve
>>> with the child nodes?
>>
>> I wanted to have the DT like:
>>
>> as3722 {
>> compatible = "ams,as3722";
>> reg = <0x40>;
>>
>> #interrupt-controller;
>> .....
>>
>>
>> regulators {
>> ldo1-in-supply = <..>;
>> ....
>> sd0 {
>> regulator-name = "vdd-cpu";
>> .....
>> };
>> sd1 {
>> regulator-name = "vdd-ddr";
>> .....
>> };
>> ....
>> };
>> };
>>
>> And regulator driver should get the regulator node by their
>> pdev->dev.of_node.
>> Currently, in most of driver, we are having the code on regulator
>> driver to get "regulators" node from parent node which I want to
>> avoid.
>
> Ah, I see. Yes, I believe the regulators should have their own node,
The use of a "regulators" node to keep all the regulator configuration
in one place seems fine...
> complete with a compatible string.
... but I see not reason why that node has to have a separate compatible
property, or /has/ to have a separate driver.
I think having a compatible value in this node would only be required if
the HW block that implements those registers is actually expected to be
shared between n different chips, and hence it's likely that you'd get
re-use out of a separate binding, driver, etc.
It's perfectly reasonable for the regulator MFD driver to know that the
binding for the top-level PMIC node has a regulators child node, and go
find it by name, and read whatever properties/nodes it needs directly
out of it. Writing code that way in no ways implies a need for a
compatible value.
> To have each regulator listed
> separately in the parent node seems a little messy. Just out of
> interest, how many regulators are we talking about here?
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
